Samba? - Page 5 - maemo.org

Active Topics

Error after installing Leste on sdcard (15)
to Maemo 7 / Leste by Arno_11 - 2 hrs, 44 mins ago
Maemo 20th Anniversary (4)
to Brainstorm by teroyk - 1 day, 2 hrs ago
Nokia Booklet 3G (RX-75) Drivers (64)
to Alternatives by teroyk - 1 day, 2 hrs ago
Porting apps to Leste (46)
to Maemo 7 / Leste by teroyk - 3 days, 6 hrs ago
more...

Page 5 of 5

« First

< Prev

Thread Tools

	wiredless	2006-07-22 , 15:56
	Posts: 96 \| Thanked: 2 times \| Joined on May 2006	#41

mount -t cifs at my address keeps returning (cant find in fstab) error. Any idea why?

Quote & Reply |

	Hedgecore	2006-07-23 , 01:28
	Posts: 1,361 \| Thanked: 115 times \| Joined on Oct 2005 @ Toronto, Ontario, Canada	#42

I had the same problem (read back in the thread... you must have root enabled in the same shell you ran the other steps in)

Last edited by Hedgecore; 2006-07-24 at 16:43.

Quote & Reply |

BanditRider	2006-07-24 , 15:36
Posts: 264 \| Thanked: 28 times \| Joined on May 2006	#43

Here is my setup:
I have a Linksys WRTSL54GS wireless router which has a USB port to which I've connected a 120GB drive in an external enclosure. The router firmware allows me to create a "windows share" which I've named NAS and has read/write access for user "joe" with password "passw0rd". This is the same thing, really, as having a shared folder on a Windows machine.

I created a directory called NAS in /media to be the mount point. You could create it in /media/mmc1 to make it easier to browse to. This was just my choice.

I don't mind having the cifs kernel module loaded all the time so I've added a line near the top of /etc/init.d/minircS to load the module at boottime.

Here's an excerpt of my minircS file:

Code:

#!/bin/sh

umask 022
PATH=/sbin:/bin:/usr/sbin:/usr/bin
insmod /mnt/initfs/lib/modules/2.6.16-omap1/ext2.ko
insmod /lib/modules/cifs.ko

mount -t proc proc /proc
mount -t sysfs sysfs /sys
mount -t usbfs usbfs /proc/bus/usb

...
I cut out alot of stuff here...
then at the bottom of the file
...

#osso hotfix #24145
chmod a+w /sys/devices/platform/audio-i2c/mic_enable
swapon -a
mount /media/mmc2
exit 0

You'll notice I also load the ext2 kernel module and mount my ext2 partition on my mmc card here. I also activate my swap partition here.

This is my /etc/fstab file:

Code:

rootfs  /               rootfs  defaults,errors=remount-ro,noatime      0 0
/dev/mmcblk0p1  /media/mmc1 vfat rw,noauto,nodev,noexec,nosuid,utf8,uid=29999 0 0
/dev/mmcblk0p2  /media/mmc2 ext2 rw,noauto      0 0
/dev/mmcblk0p3  swap    swap    defaults        0 0
//192.168.1.1/NAS       /media/NAS      cifs    rw,user=joe,password=passw0rd 0 0

Now I can mount the share with the command

mount /media/NAS

But since you need to be root to mount a filesystem, I modified fanouch's slick gainroot script and called it mountNAS and umountNAS as follows:

mountNAS

Code:

#!/bin/sh
# mount cifs shared folder from the router
# use gainroot to become root and relaunch itself 
if [ `id -u` != 0 ] ; then
#if not already root, call itself as root
sudo gainroot <<EOF
$0 $*
EOF
exit
fi
mount /media/NAS

and umountNAS

Code:

#!/bin/sh
# un-mount cifs shared folder from the router
# use gainroot to become root and relaunch itself
if [ `id -u` != 0 ] ; then
#if not already root, call itself as root
sudo gainroot <<EOF
$0 $*
EOF
exit
fi
umount /media/NAS

I made them executable with chmod +x mountNAS umountNAS
Then I coppied them to /usr/bin (which is in both user's and root's PATH)

I can now mount the share by ebtering the command mountNAS
and unmount it with umountNAS

I've added them to gnuite's cpu/load w/ run applet and it works great.

Quote & Reply |

	BruceL	2006-10-27 , 02:46
	Posts: 305 \| Thanked: 154 times \| Joined on Aug 2006 @ Colorado	#44

In the first post it was asked if Samba would allow printing from the 770. Abiword has a menu item for printing. Other programs don't have a print menu item, but since Abiword does, could it print to a shared printer through Samba?

Bruce