Active Topics
-
The N900 is now 15 years old! (9)
to Nokia N900 by Arno_11 - 1 hr, 6 mins ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 5 days, 13 hrs ago - more...
|
2010-01-18
, 13:19
|
|
Posts: 14 |
Thanked: 21 times |
Joined on Nov 2009
@ Moscow
|
#2
|
I've managed to build CLISP (with FFI support) on N900. It was very torturous experience involving learning ARM assembly, working around GCC miscompilations and unexpected optimizations, fighting bugs like accidental endianness switch, malloc+mprotect problems and so on, and so on. As far as I understand, CLISP's ARM support was done for RISC OS and it depends on its 26-bit calling convention (APCS-26). It worked on N8x0 by pure accident, and with newer kernel / libc on Fremantle it all went haywire. As of now, I have working CLISP, ASDF, SLIME. Most important libaries seem to work. I'm currently trying to get cl-gtk2 to work (as of now, it segfaults) to see whether ffcall still has any serious problems and to make a nice GUI demo. I'll prepare and distribute all necessary patches soon, but if you're in hurry, you can get my preliminary patch against clisp-2.48 here (didn't make the ffcall patch yet). BTW, there's little hope to get CLISP to run under qemu. You're better off using it on the device or under x86 scratchbox, where you can also use SBCL to have more comfortable development environment, if your code is portable enough. CLISP can be used later for deployment on the device.
Edit: don't waste your time even trying to build clisp under ARM scratchbox. Build it on the device with the patch linked from this message. You'll need to add SDK repository and free up some space in the root partition to be able to install gcc, binutils etc.
I repartitioned my device and moved /usr to eMMC in order to achieve this. There are also other approaches, see wiki.
Last edited by fionbio; 2010-01-18 at 13:25.
Edit: don't waste your time even trying to build clisp under ARM scratchbox. Build it on the device with the patch linked from this message. You'll need to add SDK repository and free up some space in the root partition to be able to install gcc, binutils etc.
I repartitioned my device and moved /usr to eMMC in order to achieve this. There are also other approaches, see wiki.
Last edited by fionbio; 2010-01-18 at 13:25.
|
|
2010-01-19
, 14:45
|
|
Posts: 48 |
Thanked: 9 times |
Joined on Jan 2010
|
#3
|
This is slightly off topic, but fionbio, I'm relatively new to the N900, and I would want to install SBCL on it. How will I do that? Any help would be greatly appreciated, sir.
|
|
2010-01-19
, 15:06
|
|
Posts: 14 |
Thanked: 21 times |
Joined on Nov 2009
@ Moscow
|
#4
|
Originally Posted by ebzzry
Unfortunately right now it's impossible
This is slightly off topic, but fionbio, I'm relatively new to the N900, and I would want to install SBCL on it. How will I do that? Any help would be greatly appreciated, sir.
SBCL doesn't have a working ARM port. Here is an unfinished attempt by Alastair Bridgewater, but there's still a lot of work to be done to make it work and no one seems to be willing to do it. Maybe I'll take a stab at it someday as I did learn some ARM assembly while porting CLISP, but I don't quite believe in success. Another possibility is to try to port CCL instead, they say this may turn out to be easier...In addition to patched CLISP, I think it should be possible to get ECL to work under Maemo. It seems that it became relatively modern CL implementaion, but as far as I understand it still has problems with unicode support, and in my case that means a great PITA with cyrillic letters.
| The Following User Says Thank You to fionbio For This Useful Post: | ||
|
|
2010-01-19
, 17:33
|
|
Posts: 48 |
Thanked: 9 times |
Joined on Jan 2010
|
#5
|
Originally Posted by fionbio
OK. One thing that caught my attention is being able to use SBCL under x86 scratchbox. Can you elaborate more on that?
Unfortunately right now it's impossible
Originally Posted by fionbio
1- Where is this patched CLISP (and accompanying documentation, if any)?
In addition to patched CLISP, I think it should be possible to get ECL to work under Maemo. It seems that it became relatively modern CL implementaion, but as far as I understand it still has problems with unicode support, and in my case that means a great PITA with cyrillic letters.
2- Will ECL out of the box run on the N900?
|
|
2010-01-19
, 17:54
|
|
Posts: 14 |
Thanked: 21 times |
Joined on Nov 2009
@ Moscow
|
#6
|
Originally Posted by ebzzry
I didn't try it yet, but I think CLISP should work out of the box on x86 scratchbox (it's just Linux on x86, after all) and then it should be possible to use it to build SBCL.
OK. One thing that caught my attention is being able to use SBCL under x86 scratchbox. Can you elaborate more on that?
Originally Posted by ebzzry
Well, if you want a relatively easy to install CLISP package, you'll have to wait a few days until I make it, sorry, too busy right now
1- Where is this patched CLISP (and accompanying documentation, if any)?
I'll need to publish it along with all my latest patches so that I don't violate GPL in any way. As I've already mentioned,here is the patch for clisp-2.48, but building it from sources is rather tedious.
2- Will ECL out of the box run on the N900?
|
|
2010-01-19
, 18:03
|
|
Posts: 48 |
Thanked: 9 times |
Joined on Jan 2010
|
#7
|
Originally Posted by fionbio
OK
I didn't try it yet, but I think CLISP should work out of the box on x86 scratchbox (it's just Linux on x86, after all) and then it should be possible to use it to build SBCL.
Originally Posted by fionbio
OK. I'll keep a close watch on that.
Well, if you want a relatively easy to install CLISP package, you'll have to wait a few days until I make it, sorry, too busy right now
here is the patch for clisp-2.48, but building it from sources is rather tedious.
Originally Posted by fionbio
Thanks for the tips. I'm very excited to have CL on the N900. I'll watch this thread for updates.
I don't know, didn't try yet. There was an effort to make ECL work on iPhone and seems like some of the problems were ARM-related, so I'm not 100% sure there will be no problems with ECL on Maemo. Also I suspect that you'll have gcc on the device to be able to compile lisp code with ECL.
 |
|
2010-01-21
, 03:15
|
|
Posts: 191 |
Thanked: 129 times |
Joined on Dec 2009
@ Bloomington, IL
|
#8
|
Originally Posted by fionbio
Waiting eagerly! I've been tearing my hair out trying to get clisp recompiled for armel :-/
Well, if you want a relatively easy to install CLISP package, you'll have to wait a few days until I make it
~Jeff
__________________
qAndora - Pandora Radio on the N9/N900
qAndora - Pandora Radio on the N9/N900
|
|
2010-01-27
, 02:36
|
|
Posts: 48 |
Thanked: 9 times |
Joined on Jan 2010
|
#10
|
Originally Posted by fionbio
Wow! Can't wait to have the debs! :-)
I've posted what I've achieved so far here. No debs yet, sorry, only binaries in .tar.gz, still need some debugging to do to make FFI work properly in debian configuration...
Configure findings: FFI: no (user requested: default) readline: yes (user requested: default) libsigsegv: no, consider installing GNU libsigsegv ./configure: libsigsegv was not detected, thus some features, such as generational garbage collection and stack overflow detection in interpreted Lisp code cannot be provided. Please do this: mkdir tools; cd tools; prefix=`pwd`/arm-unknown-linux-gnu wget http://ftp.gnu.org/pub/gnu/libsigsegv/libsigsegv-2.5.tar.gz tar xfz libsigsegv-2.5.tar.gz cd libsigsegv-2.5 ./configure --prefix=${prefix} && make && make check && make install cd ../.. ./configure --with-libsigsegv-prefix=${prefix} If you insist on building without libsigsegv, please pass --ignore-absence-of-libsigsegv to this script: ./configure --ignore-absence-of-libsigsegv~Jeff
qAndora - Pandora Radio on the N9/N900