Reply
Thread Tools
Posts: 23 | Thanked: 1 time | Joined on Apr 2010
#1
i just downloaded the new fmms from extras and i followed all the steps shown below for tmobile in the US.....

Create a new APN
Run fAPN
Create a new APN (I call mine Tmo-mms) and click add

Edit APN
go into Settings (where all the icons are)
go into Internet connection under connectivity
click on connection
highlight your NEW APN (Tmo-mms) and click edit
Hit next on the next window
In access point name, put in "wap.voicestream.com"
Leave everything else blank and hit next
Hit advance on the next window
Put a "check mark" on use proxy
In http proxy:, enter 216.155.165.50,
In port #, enter 8080 (or 9201 if 8080 fail)
Put a "check mark" on Automatic Configuration
In web address, enter http://mms.msg.eng.t-mobile.com/mms/wapenc
Hit SAVE, and then Finish

but wen i try to send a mms i still get the error 101 network is unreachable please make sure your apn settings are correct

please helppppp
 
Posts: 189 | Thanked: 47 times | Joined on Nov 2009
#2
I just recently setup fmms using tmobile. The only setting different that i have is the web address: https://216.155.174.84/servlets/mms

Also remember that you must connect to ur Tmo-mms internet connection before trying to send or receive mms messages. You can test out your setting by sending an mms message to yourself.

Hope this helps
 

The Following User Says Thank You to lfcobra For This Useful Post:
Posts: 23 | Thanked: 1 time | Joined on Apr 2010
#3
hey thanks for the quick reply but if u dont mind can u go over the exact detail of the things u entered in all the fields please i really need this mms thing to work
 
Posts: 23 | Thanked: 1 time | Joined on Apr 2010
#4
Originally Posted by lfcobra View Post
I just recently setup fmms using tmobile. The only setting different that i have is the web address: https://216.155.174.84/servlets/mms

Also remember that you must connect to ur Tmo-mms internet connection before trying to send or receive mms messages. You can test out your setting by sending an mms message to yourself.

Hope this helps
mines settings right now are in fmms when you click on configurations it says access point, phone number, image wiidth, connection mode.,... for access point wen i click on configure i have access point name written as TMo MMS username emtpy password empty proxy 216.155.165.50 proxy port as 8080 mmsc as http://216.155.174.84/servlets/mms ...for number i put my number for image width i put medium and for connection mode i have rude................then under apn setting i have name as TMo MMS connection type gprs acces point name as wap.voicestream.com username password empty and then in advance i have use proxy checked and i have 216.155.165.50 and port number as 8080 and at the bottom have the automatic configuration checked and webaddress saying http://216.155.174.84/servlets/mms

so please help me tell me when u have different or what u think is wrong
 
Posts: 105 | Thanked: 15 times | Joined on Dec 2009 @ Baltimore, USA
#5
ok this is what i have:

under connections-> edit Tmo-mms
connection type: gprs
access point name: wap.voicestream.com
then under advanced
use proxy: checked
http proxy 216.155.165.50
port 8080
and everything else blank

now inside fmms
i hace my phone number xxx-xxx-xxxx
picture size medium
connection mode polite

and under configure
access point name wap.voicestream.com
proxy 216.155.165.50
port 8080
mmsc: http://216.155.174.85/servlets/mms
and everything else blank,
all settings but the mmsc under configure get populated from you VPN, i think

all that works for me
 
benny1967's Avatar
Posts: 3,790 | Thanked: 5,718 times | Joined on Mar 2006 @ Vienna, Austria
#6
does fmms still use access points created by fapn? i think it doesn't. i don't even have fapn installed but entered all the settings in fmms.
 
Posts: 105 | Thanked: 15 times | Joined on Dec 2009 @ Baltimore, USA
#7
Originally Posted by benny1967 View Post
does fmms still use access points created by fapn? i think it doesn't. i don't even have fapn installed but entered all the settings in fmms.
I dont even know, but what finally made mine work was changing back from port 9201 to 8080 under the configure settings in fmms
 
Posts: 26 | Thanked: 8 times | Joined on May 2010
#8
i'm not sure either, but I just tried installing and running fmms without it and it didn't work for me, gave me the "bad APN" error.

I got mine working! And I needed fAPN installed to do it. I have Tmo, and here are my settings:

I named my APN "TMo MMS"

in internet connections its settings are

AP name: wap.voicestream.com
User: (blank)
Pass: (blank)
>Advanced settings:
[x] use proxy
HTTP: 216.155.165.50
Port: 8080
- all else blank. remember to press save and done as you step yourself out of the internet connection setup.

In fMMS:

Phone number is (exactly) +1xxxyyyzzzz
resize image: medium
connection: Polite (haven't tried it on rude, yet)
under Configure the settings are:
AP name: TMo MMS
user: (blank)
pass: (blank)
Proxy: 216.155.165.50
Proxy Port: 8080
MMSC: http://216.155.174.85/servlets/mms
-no advanced settings

When i want to send receive MMS I have to manually change to the TMo MMS network, since I'm in polite mode. And then go and create an MMS or click on any in my inbox. The connection seems to be pretty slow (I have rarely sent MMS messages in the past, but I wanted a "full feature phone). Hopefully they get this to work better in "havoc" mode (so that it can run in tandem with standard phone functions)

I will also mention that in that time I rebooted a couple times and even removed the battery after powering down at one point. You never know if that may have helped. In the tutorial video (that I'm too lazy to link to) he reboots after setting the new APN in internet connection.

Good luck!

Last edited by Mr. Ben; 2010-05-20 at 16:02.
 
Posts: 23 | Thanked: 1 time | Joined on Apr 2010
#9
non of those worked for some reason does any1 else have anything different or can some1 tell me step by step starting from what to downoad please i would appreciate it i really need mms
 
Posts: 376 | Thanked: 36 times | Joined on Jun 2010
#10
Hi,,

What is the settings for Nawras (Oman)???
Plz, someone helps?

Regards
 
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 08:03.