Closed Thread
Thread Tools
Posts: 201 | Thanked: 96 times | Joined on Dec 2009
#971
Originally Posted by dj_steve View Post
yea bluetooth doesn work in dualboot yet
http://talk.maemo.org/showpost.php?p...8&postcount=10

check this. something abt rnd mode
 
kingoddball's Avatar
Posts: 1,187 | Thanked: 816 times | Joined on Apr 2010 @ Australia
#972
DJ Steve: Are the builds you're releasing 'Rooted'?
I don't have any need for it at this point, just asking.
 
Posts: 2 | Thanked: 0 times | Joined on Jun 2010
#973
Hello!!
I have done all the required steps and I select Androind from bootmenu then it tries to boot but the only thing i can see in the screen is the word "Android" for a long time and nothing else happened.
Any ideas???
 
Posts: 46 | Thanked: 25 times | Joined on Nov 2009 @ Michigan, USA
#974
EDIT: whoops, nothing to see here, I was posting about the keyboard lights side effect of using R&D mode. My bad!

Last edited by fwrnando; 2010-06-13 at 07:59.
 
Banned | Posts: 388 | Thanked: 57 times | Joined on Mar 2010
#975
This topic does more buzz and useful buzz for what they are doing for MeeGo. Those guys at top should make a rapid change in their investments to Android since there is a working and fast living prototype here.

By the way, is it easy to switch back to single boot again after turning the dual boot mode on? Can the boot loader boots into Maemo 5 as default or like in 3-5 seconds if things go wrong?

Thanks for the great work again. I am not sure how to describe this device any longer. Is it a Maemo or Debian, or MeeGo or Android device

Last edited by gsever; 2010-06-13 at 10:59.
 
kingoddball's Avatar
Posts: 1,187 | Thanked: 816 times | Joined on Apr 2010 @ Australia
#976
Originally Posted by el95090 View Post
Hello!!
I have done all the required steps and I select Androind from bootmenu then it tries to boot but the only thing i can see in the screen is the word "Android" for a long time and nothing else happened.
Any ideas???

I'm guessing you have failed somewhere.
Use the newest Rootfs (0.0.3.1 on Pg84) and use all instructions on pg 30 and make sure you extract directly to SD card.
 
Posts: 1,306 | Thanked: 1,697 times | Joined on Dec 2009 @ Durham North-East UK
#977
gsever keep the keyboard vclosed and maemo will boot itself (the menus only shown when its open
 
kingoddball's Avatar
Posts: 1,187 | Thanked: 816 times | Joined on Apr 2010 @ Australia
#978
OK - here is a tiny tutorial for those of you who want to stay in RD mode but stop the keyboard flashing!

Crack open xTerm:

Code:
root
cd ..

cd etc

nano pmconfig

Change "sleep_ind 1" to "sleep_ind 0".
You do not need to use nano, I just like it's simplicity.
sleep_ind 1 is generally the last line of pmconfig.

Then reboot.
The keyboard may flash on the sides during bootup, this is fine.

Twitchers!

Enjoy... Stay in RD mode and enjoy Android.
Thanks so much DJ_Steve and e-yes!
 

The Following 3 Users Say Thank You to kingoddball For This Useful Post:
Banned | Posts: 388 | Thanked: 57 times | Joined on Mar 2010
#979
Originally Posted by El_Poochino View Post

2) Format microSD card. Type the following into terminal.
Code:
fdisk /dev/sdb <press return>
o <press return>
n <press return>
p <press return>
1 <press return>
<press return>
+xM <press return> (x is the size of the partition in MB, a formality and not used by android so make it small asy 100)
t <press return>
c <press return>
n <press return>
p <press return>
2 <press return>
<press enter>
<press enter>
w <press return>

sudo mkdosfs /dev/sd*1
sudo mke2fs -j /dev/sd*2 -m0
Up above the two sudo commands I needed to unmount N900 from my Fedora 12. I inserted microSD in it and followed your steps. Otherwise I was seeing part sdc1 was already mounted error. Unplugging and plugging back the cable solve the issue.

By the way you start with fdisk /dev/sdb with microSD inserted on N900 I was almost using my N900 memory dmesg list sdc as being the microSD. Care must be taken during this operation

Code:
flasher-3.5 --enable-rd-mode --set-rd-flags=no-lifeguard-reset,no-ext-wd -f -k *type loaction if zImage kernel downloaded here* -R <press return>
The following must signify a successful flash operation.

Code:
[root@ccn maemo_flasher-3.5_2.5.2.2]# ./flasher-3.5 --enable-rd-mode --set-rd-flags=no-lifeguard-reset,no-ext-wd -f -k ../zImage-0.0.3 -Rflasher v2.5.2 (Oct 21 2009)

Suitable USB device not found, waiting.
USB device found found at bus 002, device address 018.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_10.2010.19-1.002_PR_002
Sending kernel image (1826 kB)...
100% (1826 of 1826 kB, avg. 22000 kB/s)
Flashing kernel... done.
The device is now in R&D mode
Indeed I was able to boot in Android. For some reason I couldn't get WiFi working, plus the second boot was kind of unsuccessful. Neither the very recent third boot. They didn't bring any app to the desktop. And the OS doesn't respond any of the taps. Peff it was working at the first one.
 
Posts: 1,306 | Thanked: 1,697 times | Joined on Dec 2009 @ Durham North-East UK
#980
this has been mentioned, predd ctrl/sym and icons will appear most liekly along with a error
 

The Following 2 Users Say Thank You to dj_steve For This Useful Post:
Closed Thread

Tags
android, cool stuff, froyo on n900, nitdroid

Thread Tools

 
Forum Jump


All times are GMT. The time now is 16:49.