Reply
Thread Tools
Posts: 23 | Thanked: 2 times | Joined on May 2010 @ Manchester
#1
In the page on reflashing the N900, it says eMMC then FIASCO.

Pretty much everywhere else it says the other way around.

Which is right?
 
ToJa92's Avatar
Posts: 1,091 | Thanked: 323 times | Joined on Feb 2010 @ ~
#2
Fiasco first, then eMMC without reboot.
 

The Following 2 Users Say Thank You to ToJa92 For This Useful Post:
Posts: 23 | Thanked: 2 times | Joined on May 2010 @ Manchester
#3
Thanks -- fixed the flashing instructions...
 
Posts: 3 | Thanked: 0 times | Joined on Jun 2010
#4
When i did the above procedure my mobile got stucked at the ..... lines so after flashing the emmc i again ran the firmware file but this time with the -R option and it rebooted and now it working fine. So as per me 1st do the flashing of firmware without -R then do Emmc without -R and then do firmware with -R.
 
MohammadAG's Avatar
Posts: 2,473 | Thanked: 12,265 times | Joined on Oct 2009 @ Jerusalem, PS/IL
#5
Originally Posted by ro1407 View Post
When i did the above procedure my mobile got stucked at the ..... lines so after flashing the emmc i again ran the firmware file but this time with the -R option and it rebooted and now it working fine. So as per me 1st do the flashing of firmware without -R then do Emmc without -R and then do firmware with -R.
That's just reflashing two images twice....
Flash FIASCO FW image, without the -R
Flash the eMMC with -R.
Unplug USB.
 

The Following User Says Thank You to MohammadAG For This Useful Post:
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 21:46.