Notices


Reply
Thread Tools
Posts: 16 | Thanked: 12 times | Joined on Jun 2010 @ Finland
#71
Hi colinbaillie! Did you read my answear to DaSilva on the same page 7? The language you can use in Mappero, depends on the language you have in your N900. And you can't change it in the program. From root you can put in language files, like Mardy (the developer) explains to Nikem 2 posts higher up. I don't know which languages are supported in Mappero beta 9. That is a guestion that Mardy knows the answear to. You should at least have the interlingua voice. I just updated Mappero my self and haven't tried it yet. So at the moment i don't know if it works as it should.
 

The Following User Says Thank You to Steffe69 For This Useful Post:
Posts: 16 | Thanked: 12 times | Joined on Jun 2010 @ Finland
#72
For more information look at www.mardy.it/mappero or blog.mardy.it/feeds/posts/default/-/english
 
Posts: 8 | Thanked: 4 times | Joined on Apr 2010
#73
Originally Posted by Steffe69 View Post
Here is the new file in Finnish as promised. This time I used 7-zip to compress the file.
Nuo ovat erittäin hyvät suomenkieliset ääniohjauskomennot
 
Posts: 16 | Thanked: 12 times | Joined on Jun 2010 @ Finland
#74
Originally Posted by Jykke View Post
Nuo ovat erittäin hyvät suomenkieliset ääniohjauskomennot
Saavat kelvata, en vain tiedä (vielä) mikä versioista (1 / 2) pääsi beta ysiin. Ajattelin tehdä myös ruotsiksi ellei joku muu ehdi ensin.
 

The Following 2 Users Say Thank You to Steffe69 For This Useful Post:
Posts: 42 | Thanked: 22 times | Joined on Dec 2009
#75
Hi.

I, like others, can't get the voice navigation to work. I've looked at the instructions and followed the links, but there's no clear guide as to exactly what needs to be done to get it to work anywhere. All the advice people gives seems to point to other people asking for advice and then being unable to get it to work still.

My language is en_GB, and I've created that directory in the relevant place, and copied the en_US files into it. I've also copied the en_US files over the interlingua files.
I've also checked that announcements are turned on. Still nothing though. Not a peep. Is there another package that needs to be installed or some tweak that needs to be tweaked to get this working?
 

The Following User Says Thank You to wheelybird For This Useful Post:
Posts: 16 | Thanked: 12 times | Joined on Jun 2010 @ Finland
#76
Hi there!
With beta 7 or 8 (don't remember) I had the interlingua since my locale is fi and such files didn't exist on it. I did no tweaks to get it to work exept turning the voice on. If you have beta 9, it's possible that there is something wrong with it. From Mardys blog I read that quite alot has changed under the hood. As I said earlier I haven't yet tested it my self. Stefan.
 
Posts: 42 | Thanked: 22 times | Joined on Dec 2009
#77
Originally Posted by Steffe69 View Post
Hi there!
If you have beta 9, it's possible that there is something wrong with it.
Hi Steffe69. Thanks for the reply. Unfortunately it's beta 8, so I'm a bit stumped. :/
 
Posts: 16 | Thanked: 12 times | Joined on Jun 2010 @ Finland
#78
I tried the latest beta 9 and the voice navigation worked fine in finnish. It was a short trip, just a right and left turn tough.
 
Posts: 136 | Thanked: 47 times | Joined on Apr 2010 @ SF East Bay, Cali
#79
Someone please spell out the name of the N900 application to use for voice recording? I see 'Recorder' and 'Speech record and playback' available on my N900. Which one of these would work or is there something else I should be using? Thanks in advance for the details.
 
Posts: 16 | Thanked: 12 times | Joined on Jun 2010 @ Finland
#80
I used recaller but recoder is fine
 

The Following User Says Thank You to Steffe69 For This Useful Post:
Reply

Tags
mappero, navigation

Thread Tools

 
Forum Jump


All times are GMT. The time now is 16:49.