Active Topics
-
[HOWTO] Comprehensive Firmware Flashing Guide for N9 (1,580)
to Nokia N9 / N950 by aspergerguy - 8 hrs, 56 mins ago -
Nokia N9-00 Prototype Build S1.12 (RM-680 codename "Dali") (250)
to Nokia N9 / N950 by en0s - 3 days, 5 hrs ago -
[Announce] Maebble - Pebble support for Maemo (118)
to Applications by glo-worm - 3 days, 17 hrs ago -
Possible to flash Leste to eMMC? (6)
to Maemo 7 / Leste by Eri - 4 days, 7 hrs ago - more...
CPRman |
2010-08-01
, 20:33
|
|
Posts: 42 |
Thanked: 9 times |
Joined on Feb 2010
|
#31
|
p.s. I love you guys...
|
|
2010-08-01
, 21:55
|
|
Posts: 34 |
Thanked: 50 times |
Joined on Jun 2010
|
#32
|
Hiya.
For those having problems installing due to the 'preinit' error :-
1 - install bootmenu
2 - run M32gbinit.sh
3 - replace contents of /etc/bootmenu.conf with this
4 - Then reboot and you'll be able to choose booting from "Internal MMC card, partition 2".
One warning - don't try removing the original PR12 system - I've not tried it but I'm pretty sure the system will be unbootable and you'll need to reflash.
EDIT - to quickly check that you're really running on the eMMC - run conky and verify that root filesystem is same size as home (1.97Gb).
EDIT2 - Fixed a small bug in the script - booting from internal flash is now also presented as an option on boot.
Last edited by thingonaspring; 2010-08-02 at 15:11.
For those having problems installing due to the 'preinit' error :-
1 - install bootmenu
2 - run M32gbinit.sh
3 - replace contents of /etc/bootmenu.conf with this
Code:
# bootmenu customisation file
#
# included from bootmenu.sh after default menu is defined
# you can change some items or redefine menu completely
# timeout for automatic selection when no key is pressed
# set to -1 for no timeout (not recommended, can drain battery when device reboots unatteded)
MENU_TIMEOUT=30
# IP address for USB networking
USB_IP=192.168.2.15
# dim screen when in menu
#/usr/sbin/dsmetest -l 1 #for OS2006/7
#/usr/sbin/dsmetest -l 3 #for OS2008, 1 turns screen completely off
if [ -e /etc/bootmenu.d ]; then
# OK, rebuild menu from dynamic items
MENU_MIN=1 # first item index
MENU_1_NAME="Internal flash"
MENU_1_ID="flash"
MENU_2_NAME="Internal MMC card, partition 2, ext2"
MENU_2_ID="mmc2"
MENU_2_DEVICE="${INT_CARD}p2"
MENU_2_MODULES="mbcache ext2"
MENU_2_FSTYPE="ext2"
MENU_2_FSOPTIONS="noatime"
[ -d "/sys/block/${INT_CARD}/${MENU_2_DEVICE}" ] || MENU_2_NAME="(${MENU_2_NAME}) N/A"
menu_count=3
STR=`/usr/bin/find /etc/bootmenu.d/ -name \*.item`
if [ ! -z "$STR" ]; then
for bootmenu_item in /etc/bootmenu.d/*.item
do
ITEM_NAME=""
ITEM_ID=""
ITEM_DEVICE=""
ITEM_MODULES=""
ITEM_FSTYPE=""
ITEM_FSOPTIONS=""
ITEM_LINUXRC=""
ITEM_FBMODE=""
. $bootmenu_item
let "menu_count += 1"
eval MENU_${menu_count}_NAME=\$ITEM_NAME
eval MENU_${menu_count}_ID=\$ITEM_ID
eval MENU_${menu_count}_DEVICE=\$ITEM_DEVICE
eval MENU_${menu_count}_MODULES=\$ITEM_MODULES
eval MENU_${menu_count}_FSTYPE=\$ITEM_FSTYPE
eval MENU_${menu_count}_FSOPTIONS=\$ITEM_FSOPTIONS
eval MENU_${menu_count}_LINUXRC=\$ITEM_LINUXRC
eval MENU_${menu_count}_FBMODE=\$ITEM_FBMODE
done
fi
let "menu_count += 1"
ITEM_NAME="Power off (when not on charger)"
ITEM_ID="off"
ITEM_DEVICE=""
ITEM_MODULES=""
ITEM_FSTYPE=""
ITEM_FSOPTIONS=""
ITEM_LINUXRC=""
ITEM_FBMODE=""
eval MENU_${menu_count}_NAME=\$ITEM_NAME
eval MENU_${menu_count}_ID=\$ITEM_ID
eval MENU_${menu_count}_DEVICE=\$ITEM_DEVICE
eval MENU_${menu_count}_MODULES=\$ITEM_MODULES
eval MENU_${menu_count}_FSTYPE=\$ITEM_FSTYPE
eval MENU_${menu_count}_FSOPTIONS=\$ITEM_FSOPTIONS
eval MENU_${menu_count}_LINUXRC=\$ITEM_LINUXRC
eval MENU_${menu_count}_FBMODE=\$ITEM_FBMODE
MENU_MAX=${menu_count}
fi
One warning - don't try removing the original PR12 system - I've not tried it but I'm pretty sure the system will be unbootable and you'll need to reflash.
EDIT - to quickly check that you're really running on the eMMC - run conky and verify that root filesystem is same size as home (1.97Gb).
EDIT2 - Fixed a small bug in the script - booting from internal flash is now also presented as an option on boot.
Last edited by thingonaspring; 2010-08-02 at 15:11.
| The Following User Says Thank You to thingonaspring For This Useful Post: | ||
|
|
2010-08-01
, 22:37
|
|
Posts: 222 |
Thanked: 22 times |
Joined on Jul 2010
@ Sydney Australia
|
#33
|
Originally Posted by xopher
Xopher,
@coffee - I ran my OS from SD in my 800 and 810, I run another embedded device's OS from a card. For my needs/wants it suits me well; I'd rather burn through some SD cards than the NAND. I know it's a myth blah blah write cycles write cycles etc....I just like it that way
Anyone have this working with multiboot yet? Can you share your .item substance I've not had a lot of time to muck with it and have failed getting it to boot a few times. Thanks!
Attached are the .item files from my n900 for Multiboot with Nitdroid, Power Kernel & Maemo PR1.2. I hope they are off assistance.
I changed the file extension from .item to .txt to upload, simply change it back after downloading them.
Stephen
|
|
2010-08-01
, 23:10
|
|
Posts: 116 |
Thanked: 40 times |
Joined on Mar 2010
|
#34
|
Thanks, I have those 3 items from my setup but was unsuccessful in creating an item for the eMMC boot. I only get the Nokia splash screen then a shutdown after some seconds. Might you have one for that?
|
|
2010-08-01
, 23:25
|
|
Posts: 222 |
Thanked: 22 times |
Joined on Jul 2010
@ Sydney Australia
|
#35
|
No mate, looking into it now.
After seeing the thread above for Bootmenu, our I expect will be very similar, so expecting something like (mix of the bootmenus & multiboots for stock kernel:
ITEM_NAME="Maemo 5 Internal Flash"
ITEM_KERNEL=2.6.28-omap1
ITEM_MODULES=mbcache ext2
ITEM_DEVICE=${INT_CARD}p2
ITEM_FSTYPE=ext2
ITEM_FSOPTIONS="noatime" [ -d "/sys/block/${INT_CARD}/${MENU_2_DEVICE}" ] ||
I did notice the bootmenu list FSTYPE as ext2 whilst the multiboot as ext3, not sure myself if correct.
After seeing the thread above for Bootmenu, our I expect will be very similar, so expecting something like (mix of the bootmenus & multiboots for stock kernel:
ITEM_NAME="Maemo 5 Internal Flash"
ITEM_KERNEL=2.6.28-omap1
ITEM_MODULES=mbcache ext2
ITEM_DEVICE=${INT_CARD}p2
ITEM_FSTYPE=ext2
ITEM_FSOPTIONS="noatime" [ -d "/sys/block/${INT_CARD}/${MENU_2_DEVICE}" ] ||
I did notice the bootmenu list FSTYPE as ext2 whilst the multiboot as ext3, not sure myself if correct.
|
|
2010-08-01
, 23:36
|
|
Posts: 222 |
Thanked: 22 times |
Joined on Jul 2010
@ Sydney Australia
|
#36
|
Firstly,
Is this correct way to load the .sh file:
sh /home/user/MyDocs/M32GBinit.sh
So It ran and got the following:
Remove old Maemo 5 root files from /home before copying....
Umount /opt bindings (one error on /opt is expected)...
umount: cannot umount /opt: Device or resource busy
Start copying Maemo 5 root file system to /home....
(device can be unresponsible around 10 minutes)
Copying done.
Remount /opt back (error about / is expected)....
start: unkown job: pymaemo optify
Create dirs....
Edit a vital scripts on new root file system in /home partition...
Done: Maemo 5 (10.2010.19-1) has been prepared in /home partition.
Whilst it says done, are the above in red anything to worry about or normal and all part the process. How do I confirm that it has installed correctly?
Is this correct way to load the .sh file:
sh /home/user/MyDocs/M32GBinit.sh
So It ran and got the following:
Remove old Maemo 5 root files from /home before copying....
Umount /opt bindings (one error on /opt is expected)...
umount: cannot umount /opt: Device or resource busy
Start copying Maemo 5 root file system to /home....
(device can be unresponsible around 10 minutes)
Copying done.
Remount /opt back (error about / is expected)....
start: unkown job: pymaemo optify
Create dirs....
Edit a vital scripts on new root file system in /home partition...
Done: Maemo 5 (10.2010.19-1) has been prepared in /home partition.
Whilst it says done, are the above in red anything to worry about or normal and all part the process. How do I confirm that it has installed correctly?
|
|
2010-08-02
, 01:08
|
|
Posts: 116 |
Thanked: 40 times |
Joined on Mar 2010
|
#37
|
do an ls on /home I believe
|
|
2010-08-02
, 01:11
|
|
Posts: 222 |
Thanked: 22 times |
Joined on Jul 2010
@ Sydney Australia
|
#38
|
Originally Posted by Coffee
Well I tried this and doesn't work as it just skips back to boot menu. I do know that in Multiboot there are other files in home/boot/multiboot. I don't understand how Multiboot works and maybe we need other mods?
No mate, looking into it now.
After seeing the thread above for Bootmenu, our I expect will be very similar, so expecting something like (mix of the bootmenus & multiboots for stock kernel:
ITEM_NAME="Maemo 5 Internal Flash"
ITEM_KERNEL=2.6.28-omap1
ITEM_MODULES=mbcache ext2
ITEM_DEVICE=${INT_CARD}p2
ITEM_FSTYPE=ext2
ITEM_FSOPTIONS="noatime" [ -d "/sys/block/${INT_CARD}/${MENU_2_DEVICE}" ] ||
I did notice the bootmenu list FSTYPE as ext2 whilst the multiboot as ext3, not sure myself if correct.
|
|
2010-08-02
, 01:33
|
|
Posts: 116 |
Thanked: 40 times |
Joined on Mar 2010
|
#39
|
I tried the FSOPTIONS from the nitdroid and the ubuntu items I have and can not get it to boot either way. I never got the ubuntu one to boot either.I'll try loading it with Titan's kernel maybe
|
|
2010-08-02
, 01:38
|
|
Posts: 222 |
Thanked: 22 times |
Joined on Jul 2010
@ Sydney Australia
|
#40
|
Well I compared it against the list in the first thread:
/home/bin
/home/boot
/home/cdrom
/home/dev
/home/etc
/home/floppy
/home/initrd
/home/lib
/home/proc
/home/root
/home/sbin
/home/src
/home/sys
/home/syspart
/home/usr (usr - not user! /home/user is OK)
/home/var
/home/mnt
/home/tmp
/home/media
/home/home
All but one is different, I have an srv folder and not an src. Can you check what you have, maybe a typo?
As for the ".item" file, I have zero idea, have posted on the Multiboot thread and fingers crossed some kind lad will assist.
/home/bin
/home/boot
/home/cdrom
/home/dev
/home/etc
/home/floppy
/home/initrd
/home/lib
/home/proc
/home/root
/home/sbin
/home/src
/home/sys
/home/syspart
/home/usr (usr - not user! /home/user is OK)
/home/var
/home/mnt
/home/tmp
/home/media
/home/home
All but one is different, I have an srv folder and not an src. Can you check what you have, maybe a typo?
As for the ".item" file, I have zero idea, have posted on the Multiboot thread and fingers crossed some kind lad will assist.
