Active Topics
-
The N900 is now 15 years old! (9)
to Nokia N900 by Arno_11 - 11 hrs, 10 mins ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 5 days, 23 hrs ago - more...
|
2010-08-02
, 08:55
|
|
Posts: 10 |
Thanked: 5 times |
Joined on Jan 2010
@ London, UK
|
#2
|
Instructions on how to do that are here. This will leave you with two installations on your N900, Maemo on the system memory and MeeGo on the SD card. It's not fully dual boot as it requires a computer to load the MeeGo kernel every time you want to use it, but it does mean that the Maemo install stays clean and useable.
| The Following 2 Users Say Thank You to steph For This Useful Post: | ||
|
|
2010-08-03
, 15:03
|
|
Posts: 29 |
Thanked: 0 times |
Joined on Dec 2009
@ India Chennai
|
#3
|
Originally Posted by steph
Instructions on how to do that are here. This will leave you with two installations on your N900, Maemo on the system memory and MeeGo on the SD card. It's not fully dual boot as it requires a computer to load the MeeGo kernel every time you want to use it, but it does mean that the Maemo install stays clean and useable.
do u mean the below link
http://wiki.meego.com/ARM/N900/Install/MMC
|
|
2010-08-03
, 16:26
|
|
Posts: 10 |
Thanked: 5 times |
Joined on Jan 2010
@ London, UK
|
#4
|
Originally Posted by venkat_i22
Yeah that link tells you how to install an image onto the SD, but not how to build one. The only public image available is limited to say the least, the link I posted shows you how to build an image complete with the UX (not that it does very much at the moment anyway).
do u mean the below link
http://wiki.meego.com/ARM/N900/Install/MMC
|
|
2010-08-09
, 16:09
|
|
Posts: 1,048 |
Thanked: 1,127 times |
Joined on Jan 2010
@ Amsterdam
|
#5
|
I am having trouble getting the kernel flashed, trying it from an Ubuntu 10.4 install.
anthonie@anthonie-laptop:~$ sudo ./flasher-3.5 -l -b -k meego-handset-armv5tel-n900-nokia-proprietary-1.0.80.13.20100803.2-mmcblk0p.raw
flasher v2.5.2 (Oct 21 2009)
USB device found found at bus 001, device address 013.
Found device RX-51, hardware revision 2204
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_10.2010.19-1_PR_MR0
Sending kernel image (2002944 kB)...
Write failed after 0 bytes
usb_bulk_write: Resource temporarily unavailable
Anyone in the know that could give me some pointers?
anthonie@anthonie-laptop:~$ sudo ./flasher-3.5 -l -b -k meego-handset-armv5tel-n900-nokia-proprietary-1.0.80.13.20100803.2-mmcblk0p.raw
flasher v2.5.2 (Oct 21 2009)
USB device found found at bus 001, device address 013.
Found device RX-51, hardware revision 2204
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_10.2010.19-1_PR_MR0
Sending kernel image (2002944 kB)...
Write failed after 0 bytes
usb_bulk_write: Resource temporarily unavailable
Anyone in the know that could give me some pointers?
|
|
2010-08-09
, 16:16
|
|
Posts: 44 |
Thanked: 1 time |
Joined on Aug 2010
|
#6
|
Write failed after 0 bytes
usb_bulk_write: Resource temporarily unavailable
|
|
2010-08-09
, 17:33
|
|
Posts: 1,048 |
Thanked: 1,127 times |
Joined on Jan 2010
@ Amsterdam
|
#7
|
I don't get it. I have done all the steps as described in the wiki page mentioned above in this thread. Put the SD card in my laptop, dd'd the raw image over to the card, taken it out and put it in the N900.
After that the command given as pasted above, outcome is the same.
The SD card that I used is a 4 gig Micro SD, with EXT3 fs on it. If the given command would be wrong, I suppose I'd get an error message, right?
After that the command given as pasted above, outcome is the same.
The SD card that I used is a 4 gig Micro SD, with EXT3 fs on it. If the given command would be wrong, I suppose I'd get an error message, right?
|
|
2010-08-10
, 16:43
|
|
Posts: 10 |
Thanked: 0 times |
Joined on Jun 2010
|
#8
|
I have the same problem:
Code:
Microsoft Windows XP [Versión 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Archivos de programa\maemo\flasher-3.5>flasher-3.5.exe -l -b -k RX-51_2009SE_ 10.2010.19-1_PR_COMBINED_MR0_ARM.bin flasher v2.5.2 (Sep 24 2009) USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0 105. Found device RX-51, hardware revision 2101 NOLO version 1.4.14 Version of 'sw-release': RX-51_2009SE_10.2010.19-1_PR_MR0 Sending kernel image (183322 kB)... Write failed after 0 bytes usb_bulk_write: No error C:\Archivos de programa\maemo\flasher-3.5>
|
|
2010-08-11
, 00:48
|
|
Posts: 508 |
Thanked: 130 times |
Joined on Sep 2009
|
#9
|
all installation works fine! but when i boot to meego i get a dos like screen on the n900 when trying to boot up meego, saying someting about partitions, and on another row something about "panic kernel"
After some time it quits and the n900 is shut down.
What am i doing wrong here? I have formatted the card in ext3 before writing the raw image to it. then insert in the n900, connect the usb holding U and flashed the kernel. after that i get that message about panic and stuff.... its like he cant read the proper data from the sd card.
After some time it quits and the n900 is shut down.
What am i doing wrong here? I have formatted the card in ext3 before writing the raw image to it. then insert in the n900, connect the usb holding U and flashed the kernel. after that i get that message about panic and stuff.... its like he cant read the proper data from the sd card.
|
|
2010-08-15
, 15:36
|
|
Posts: 26 |
Thanked: 3 times |
Joined on Nov 2009
@ italy
|
#10
|
Hi,
i have same problem
i have same problem
HELP!!!!!
I wannt to install Meego with out disturbing Maemo5, so is there any way....
Is dual boot possible....
Best way to format 8gb card to assis Meego installation on the MMC.?