Reply
Thread Tools
Posts: 3 | Thanked: 0 times | Joined on Sep 2010
#461
Originally Posted by snakekontrol View Post
when i go to chroot /.neopwn and I type: airmon-ng start wlan0, it gives me an error saying:
Cannot find /proc/version - is /proc mounted?

Any ideas?
I am having this same problem. I tried manually mounting /proc while inside the neopwn chroot, but that doesn't seem to let you put wlan0 into monitor mode as airmon-ng says it is unsupported (this is after insmodding the proper modules). Any help is appreciated.
 
Posts: 118 | Thanked: 39 times | Joined on Apr 2010 @ Jakarta, Indonesia
#462
to start monitor mode i'm using the following commands:

sudo gainroot
ifconfig wlan0 down
iwconfig wlan0 mode monitor
ifconfig wlan0 up
 
Posts: 69 | Thanked: 15 times | Joined on Jul 2010 @ behind your firewall
#463
Originally Posted by snakekontrol View Post
when i go to chroot /.neopwn and I type: airmon-ng start wlan0, it gives me an error saying:
Cannot find /proc/version - is /proc mounted?

Any ideas?
don't mount via xterm, reboot n900, then open neopwn then go to syste control panel>Filesystem then click mount. it will work
__________________
N900 w/ kingston 16 gb class 10.
 

The Following 2 Users Say Thank You to percypogi For This Useful Post:
Posts: 116 | Thanked: 40 times | Joined on Mar 2010
#464
Finally got to play with this and cracked my APs WEP. Woohoo! I don't mind supporting the team with my forty dollarama.
 
Posts: 39 | Thanked: 10 times | Joined on Nov 2009
#465
Originally Posted by percypogi View Post
don't mount via xterm, reboot n900, then open neopwn then go to syste control panel>Filesystem then click mount. it will work
thanks! got it working, time to crack my ap wep key =D
 
hawaii's Avatar
Posts: 1,030 | Thanked: 792 times | Joined on Jun 2009
#466
Originally Posted by adhrie View Post
to start monitor mode i'm using the following commands:

sudo gainroot
ifconfig wlan0 down
iwconfig wlan0 mode monitor
ifconfig wlan0 up
You should be using `airmon-ng` to set the device into monitor mode.
 
Posts: 230 | Thanked: 39 times | Joined on Jun 2010
#467
english tut would be awesome guys, i cant read Spanish and French
 
Posts: 3 | Thanked: 0 times | Joined on Sep 2010
#468
hi every one.. great work all you ppl that have got neopwn to work.. i too have got it to work on mmc but am interested in putting this on an ext3 partition on my emmc. some one said this is possible but i am lost as to where to start. i have searched the forums but have not found anything. if some one could talk me through it or point me in the direction of a tut for creating this partition i would be most grateful.. thanks in advance.
 
Posts: 266 | Thanked: 83 times | Joined on Oct 2009
#469
Originally Posted by hawaii View Post
You should be using `airmon-ng` to set the device into monitor mode.
I just start airodump-ng immediately without setting monitor mode. It will automatically set it to monitor mode.
However i must reset it to managed mode.

(I'm not using neopwn, only maemo with enhanced kernal + aircrack installed)
 
Posts: 9 | Thanked: 0 times | Joined on Aug 2010
#470
Hello
I created a desktop shortcut to the N900, to activate and deactivate the injection easily with two buttons.
The explanation within the file.

http://www.megaupload.com/?d=XSIFWCQO
 
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 21:33.