Page 3 of 3 12 3
Reply
Thread Tools
toxaris is offline toxaris
2010-09-20 , 14:34
Posts: 424 | Thanked: 196 times | Joined on Mar 2010 @ Sweden
#21
Originally Posted by 9000 View Post
Some time a particular freq. range doesn't work for you, consider changing to some other range.

If you look at the OC profile you selected(starving in this example, and provided that you're using titan's power kernel), you can find a list of selectable freq.:

Code:
FREQS="0:22,90 125:22,90 250:28,180 500:29,360 550:32,400 600:34,430 700:41,430 750:42,430 805:45,430 850:46,500 900:49,500 950:52,500 1000:55,500 1100:63,520 1150:69,520"
Say if the max. freq. 850 caused problem on your N900, you may step up or down, say 805 or 900, to see if the same thing would happen again.

Similar case for min. freq., though I usually set it to 500 for OC.

In my case, 500-950 is more stable than 500-850. YMMV.

Load up OC profile only when need(to save your battery, to make phone app more stable, etc.). You may setup Queen's Becon Widget to load/unload OC profile on desktop.

Hope this help.
Yea, I made a QB widget to set LV profile and 250-805 Mhz, now www.dn.se works fine.

But I think I shall try Starving profile too, it would be even better to save som battery.
 
toxaris is offline toxaris
2010-09-21 , 11:35
Posts: 424 | Thanked: 196 times | Joined on Mar 2010 @ Sweden
#22
BTW
What happens if I run throu QueenBecon
"sudo kernel-config load ideal;sudo kernel-config limit 250 600"

Will that result in voltage profile ideal and limit 250 to 600 mhz?
 
9000 is offline 9000
2010-09-21 , 13:11
Posts: 1,425 | Thanked: 983 times | Joined on May 2010 @ Hong Kong
#23
Originally Posted by toxaris View Post
BTW
What happens if I run throu QueenBecon
"sudo kernel-config load ideal;sudo kernel-config limit 250 600"

Will that result in voltage profile ideal and limit 250 to 600 mhz?
Better use && instead of ;

Run under xterminal to make sure sudo works for u.
 
munkiii is offline munkiii
2010-09-21 , 15:08
Posts: 179 | Thanked: 49 times | Joined on Nov 2008
#24
Originally Posted by Renkon View Post
@munkiii:
what voltage profile you're on?
xlv, ulv, ul, ideal, default?
Ideal.

But i've noticed that image gallery thumbnails (and sometimes images) keep getting corrupted.

I wonder if this is connected to OC'ing.
 
gabby131 is offline gabby131
2010-09-21 , 15:17
Posts: 1,729 | Thanked: 388 times | Joined on Jan 2010 @ Canada
#25
Originally Posted by toxaris View Post
I have found a strange behavior when OC to 850mhz.
I open up www.dn.se and navigate to almost any underpage, the browser starts to load the page and after a while after some scrolling/zooming the page reloads and the phone crashes.

This never happens if the phone is running stock clock (600mhz).
i did try opening the URL you provided on the quoted post above with all the settings, and noticeable that microB on my n900 crashes @1100MHz-1150MHz in IDEAL, ULV, XLV settings.

LV settings works fine up to 1150mhz.

Starving setting is not stable (reboots the n900) on my part so i cant make an output.
__________________
if i did help you, just click "Thanks" on the lower right of my post. thanks!

"The best way to break a Spell is to prevent it from being cast in the first place"

N900: 1000/1150mhz; sampling_rate 15; up_threshold 150000;
 
9000 is offline 9000
2010-09-21 , 17:23
Posts: 1,425 | Thanked: 983 times | Joined on May 2010 @ Hong Kong
#26
Originally Posted by gabby131 View Post
Starving setting is not stable (reboots the n900) on my part so i cant make an output.
Do you have smartreflex on?
 
SAABoy is offline SAABoy
2010-09-22 , 00:51
Posts: 604 | Thanked: 108 times | Joined on Feb 2010 @ Phoenix, WA
#27
Originally Posted by 9000 View Post
Do you have smartreflex on?
What is smartflex?
 
9000 is offline 9000
2010-09-22 , 01:23
Posts: 1,425 | Thanked: 983 times | Joined on May 2010 @ Hong Kong
#28
Originally Posted by SAABoy View Post
What is smartflex?
smartreflex...

Run the following to see if they are turning on:

Code:
cat /sys/power/sr_vdd1_autocomp
cat /sys/power/sr_vdd2_autocomp
1=on, 0=off
 
munkiii is offline munkiii
2010-09-29 , 14:51
Posts: 179 | Thanked: 49 times | Joined on Nov 2008
#29
Originally Posted by 9000 View Post
smartreflex...

Run the following to see if they are turning on:

Code:
cat /sys/power/sr_vdd1_autocomp
cat /sys/power/sr_vdd2_autocomp
1=on, 0=off
I've just checked on mine, and both of the outputs there are 0, so Off.

What does this effect?
 
gabby131 is offline gabby131
2010-10-24 , 12:58
Posts: 1,729 | Thanked: 388 times | Joined on Jan 2010 @ Canada
#30
@9000

no.....or maybe smartreflex is on by default on starving?
__________________
if i did help you, just click "Thanks" on the lower right of my post. thanks!

"The best way to break a Spell is to prevent it from being cast in the first place"

N900: 1000/1150mhz; sampling_rate 15; up_threshold 150000;
 
Reply
Page 3 of 3 12 3

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 00:19.

Contact Us - Home - Archive - Top