Notices


Reply
Thread Tools
Posts: 79 | Thanked: 40 times | Joined on Feb 2010 @ holland
#301
Originally Posted by MohammadAG View Post
It already supports kernel-power
WOW when ,where will be able to download it
thanx shokran for the good newS
 
DARKFiB3R's Avatar
Posts: 19 | Thanked: 6 times | Joined on Oct 2010 @ SE London
#302
Stock kernel 3.10

- Installed PSFreedom
- Updated the psfreedom.ko file to this one LINK
- Shut off the PS3 by using the switch at the back.
- Connected the N900 to the PS3.
- Ran PSFreedom, clicked the Jailbreak Mode On button.
- Flipped the On switch at the back of the PS3.
- Pressed the power button and then immediately pressed the eject button.
- Heard 3 short beeps as the PS3 started to boot.
- Scratched head and looked at black screen.

Please help

EDIT:

[30203.603973] PSFreedom gadget: proc_payload_read (/proc/psfreedom/payload) called. count 3072.Offset 0x00000000 - 0x00000c00
[30203.604064] PSFreedom gadget: proc_payload_read (/proc/psfreedom/payload) called. count 1024.Offset 0x00000c00 - 0x00001000
[30203.604095] PSFreedom gadget: proc_payload_read (/proc/psfreedom/payload) called. count 288.Offset 0x00000ee0 - 0x00001000
[30203.604187] PSFreedom gadget: proc_payload_read (/proc/psfreedom/payload) called. count 3072.Offset 0x00000ee0 - 0x00001ae0
[30213.216125] PSFreedom gadget: unbind
[30220.821716] PSFreedom gadget: PS3 Jailbreak exploit, version: 1.0 - 29 August 2010
[30220.821746] PSFreedom gadget: Loading firmware 3.41
[30220.821746] PSFreedom gadget: Setting up descriptors for 3.41
[30220.821777] PSFreedom gadget: Loading default payload and shellcode for 3.41
[30220.821807] PSFreedom gadget: using musb_hdrc, EP IN ep2in
[30220.821838] PSFreedom gadget: using musb_hdrc, EP IN ep1in (0x81)
[30220.821838] PSFreedom gadget: using musb_hdrc, EP OUT ep2out (0x2)
[30220.821868] PSFreedom gadget: Got disconnected
[30220.822021] PSFreedom gadget: /proc/psfreedom/status created
[30220.822052] PSFreedom gadget: /proc/psfreedom/version created
[30220.822052] PSFreedom gadget: /proc/psfreedom/payload created
[30220.822082] PSFreedom gadget: /proc/psfreedom/shellcode created
[30220.822113] PSFreedom gadget: /proc/psfreedom/supported_firmwares created
[30220.822113] PSFreedom gadget: /proc/psfreedom/fw_version created
[30236.501586] PSFreedom gadget: high speed
[30240.214477] PSFreedom gadget: Enabled BULK OUT endpoint
[30240.214508] PSFreedom gadget: Enabled BULK IN endpoint
[30240.214538] PSFreedom gadget: high speed
Why is it going on about 3.41? I thought replacing the psfreedom.ko file with the PL3 one would allow it to work on 3.10

EDIT 2:

cat /proc/psfreedom/supported_firmwares

3.41 3.15 3.10 3.01

wtf am I doing wrong?

Last edited by DARKFiB3R; 2010-10-17 at 16:17.
 
Posts: 225 | Thanked: 105 times | Joined on May 2010
#303
latest revision of PSFreedom compiled for power kernel
Attached Files
File Type: gz psfreedom.ko.tar.gz (80.5 KB, 170 views)
 

The Following 7 Users Say Thank You to Pillum For This Useful Post:
Posts: 79 | Thanked: 40 times | Joined on Feb 2010 @ holland
#304
Originally Posted by Pillum View Post
latest revision of PSFreedom compiled for power kernel
thanx where should we put ,...?
just in root and replace the older one ... ?
thanx
 
Posts: 225 | Thanked: 105 times | Joined on May 2010
#305
replace the older one
ive compiled this for powerkernel so you need a powerkernel to make this work

btw. theres a thanks button
 

The Following User Says Thank You to Pillum For This Useful Post:
Posts: 12 | Thanked: 0 times | Joined on Sep 2010 @ Amsterdam
#306
Originally Posted by anray View Post
I'm compiled latest psfreedom:
http://psx-scene.com/forums/f6/psfre...9/index11.html
Please, see latest news from KaKaRoTo! It's important for my build:
http://kakaroto.homelinux.net/

So this has pl3??? and we use it with gaia manager right
 
Posts: 92 | Thanked: 14 times | Joined on Dec 2009 @ Toronto, Canada
#307
Originally Posted by Pillum View Post
replace the older one
ive compiled this for powerkernel so you need a powerkernel to make this work

btw. theres a thanks button
I put it in /home/opt/psfreedom/modules/power40 and no luck, also tried just in modules and in psfreedom. Unfortunately none of these worked, they did not even show any messages at all when I clicked on "kernel messages".

I am for sure using the power kernel (I am overclocked), so that is not the issue.

Any thoughts?
 
Posts: 39 | Thanked: 0 times | Joined on Mar 2010
#308
think it goes in home/opt/psfreedom/modules/omap1
 
Posts: 92 | Thanked: 14 times | Joined on Dec 2009 @ Toronto, Canada
#309
Would that not be where the omap kernel goes and the power goes in power40?
 
Posts: 230 | Thanked: 39 times | Joined on Jun 2010
#310
is the link above complied is hermes v4 ? reading few pages back up to here is comfusing which version is it.
 
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 04:58.