Page 499 of 536 « First 489497498 499 500501509 Last »
Poll: Do you think its possible to overclock the N900?!
Poll Options
Do you think its possible to overclock the N900?!

Reply
Thread Tools
mirakels is offline mirakels
2010-11-09 , 21:18
Posts: 197 | Thanked: 101 times | Joined on Dec 2009 @ Netherlands
#4981
note also dsp frequency may be changed at higher cpu frequencies. See your config file.

Ihad massive probelms with camera at higher cpu frequecies so limited mine to 750 MHz. I installed syslog and found 'dspbridge' errors when camera did not work.
 

The Following 2 Users Say Thank You to mirakels For This Useful Post:
Mr. Incredible is offline Mr. Incredible
2010-11-09 , 21:26
Posts: 209 | Thanked: 44 times | Joined on Jan 2010 @ Austria
#4982
Yes, I tried to raise the voltages too but no success.

My current freqs are: 0:20,90 500:30,360 900:54,500
Avoiding all other frequencies.
 
titan is offline titan
2010-11-09 , 21:27
Posts: 946 | Thanked: 1,650 times | Joined on Oct 2009 @ Germany
#4983
Originally Posted by ahmadamaj View Post
MohammadAg added USB hostmode to your kernel. Anything about that in v41?
USB hostmode patches are planned for one of the next releases.
First I need to find their latest patches and make sure they don't interfere with normal operation.
 

The Following 9 Users Say Thank You to titan For This Useful Post:
ahmadamaj is offline ahmadamaj
2010-11-09 , 21:37
Posts: 223 | Thanked: 79 times | Joined on Apr 2010 @ Lebanon- Beirut
#4984
Originally Posted by titan View Post
USB hostmode patches are planned for one of the next releases.
First I need to find their latest patches and make sure they don't interfere with normal operation.
so is it recommended to try his patch or no?
 
Crashdamage is offline Crashdamage
2010-11-09 , 21:38
Posts: 670 | Thanked: 747 times | Joined on Aug 2009 @ Kansas City, Missouri, USA
#4985
Originally Posted by matts76 View Post
For me the kernel power (settings) were not wiped after OTA firmware update, mine was still installed and all my custom profiles worked
I had to reinstall the kernel-power settings package, but saved profiles are left intact. You didn't reinstall the setting package?

...also after pr1.3 both kernel power and settings showed as installed, hence the need to reinstall not install kernel-power
I believe that's incorrect information due to leftovers in the install database, stuff not overwritten by the OTA update. See below.

...kernel-power and settings are not wiped at all, the new PR1.3 kernel is just flashed as a replacement, leaving kernel-power installed but not in use.
I'm pretty sure Titan's kernel-power is actually overwritten during the update, replaced by the stock kernel.
__________________
Registered Linux user #266531.
 
Matan is offline Matan
2010-11-09 , 21:45
Posts: 1,224 | Thanked: 1,763 times | Joined on Jul 2007
#4986
Originally Posted by Mr. Incredible View Post
Yes, I tried to raise the voltages too but no success.

My current freqs are: 0:20,90 500:30,360 900:54,500
Avoiding all other frequencies.
Try reducing DSP frequency, instead of upping voltage.

400 should work at voltage 54 (that is the default in Nokia's kernel) and 430 should also be safe.
__________________
My repository

"N900 community support for the MeeGo-Harmattan" Is the new "Mer is Fremantle for N810".

No more Nokia devices for me.
 
Mr. Incredible is offline Mr. Incredible
2010-11-09 , 22:00
Posts: 209 | Thanked: 44 times | Joined on Jan 2010 @ Austria
#4987
Reducing DSP frequency did't do the job. I played around with the voltages a bit and got it working now with a higher voltage at 500 Mhz

FREQS= "0:20,90 500:32,360 900:54,500"

Thank you guys!
 
joerg_rw's Avatar
joerg_rw is offline joerg_rw
2010-11-09 , 22:06
Posts: 2,222 | Thanked: 12,651 times | Joined on Mar 2010 @ SOL 3
#4988
Originally Posted by titan View Post
USB hostmode patches are planned for one of the next releases.
First I need to find their latest patches and make sure they don't interfere with normal operation.
We're still on a beta level, and API is prone to change drastically. Not much sense in rushing this

Ah, and - nice to hear of you. Welcome back :-)

cheers
jOERG
__________________
Maemo Community Council member [2012-10, 2013-05, 2013-11, 2014-06 terms]
Hildon Foundation Council inaugural member.
MCe.V. foundation member

EX Hildon Foundation approved Maemo Administration Coordinator (stepped down due to bullying 2014-04-05)
aka "techstaff" - the guys who keep your infra running - Devotion to Duty http://xkcd.com/705/

IRC(freenode): DocScrutinizer*
First USB hostmode fanatic, father of H-E-N
 

The Following 6 Users Say Thank You to joerg_rw For This Useful Post:
MarkyboyUK is offline MarkyboyUK
2010-11-09 , 22:23
Posts: 49 | Thanked: 11 times | Joined on Mar 2010
#4989
I had power40 kernel prior to pr1.3 OTA upgrade. If I want to use your power41 will I need to do a reinstall of power40 first and then an upgrade to power 41?
Just to be clear, I have not yet reinstalled power40 since the pr1.3 OTA upgrade.
Thanks
 
titan is offline titan
2010-11-09 , 22:36
Posts: 946 | Thanked: 1,650 times | Joined on Oct 2009 @ Germany
#4990
Originally Posted by hawaii View Post
@titan any chances of including compat-wireless in a next build?
only if you can tell me how to get it working on the N900...
 
Reply
Page 499 of 536 « First 489497498 499 500501509 Last »

Tags
cooking on gas, cortex-a8, faster, first to fry it wins!, hardware, its smoking, n900, need for speed, need for weed, nos, omap, omap3, omap3430, overclock, overclocking, soc, system-on-a-chip, the dogs, this thread got good!, vtec just kicked in y0!, warranty will be void, whooplah, zoom zoom

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 23:16.

Contact Us - Home - Archive - Top