Send recieve files over WIFI like dukto - Page 4 - maemo.org

Active Topics

List of well performing apps on Leste (35)
to Maemo 7 / Leste by smatkovi - 10 hrs, 27 mins ago
Porting apps to Leste (43)
to Maemo 7 / Leste by teroyk - 16 hrs, 50 mins ago
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (13)
to SailfishOS by edp17 - 1 day, 8 hrs ago
Sailfish OS for the Samsung Galaxy Note 4 (SM-N910C) - (treltexx) (79)
to SailfishOS by edp17 - 1 day, 8 hrs ago
U-Boot for Nokia RX-51 with BootMenu (updated version 2012.10-rc3-1) (843)
to Alternatives by Arno_11 - 1 day, 13 hrs ago
Maemo repository (5)
to Community by dredlok706 - 4 days, 9 hrs ago
Re-commissioning N9 in 2018 (127)
to MeeGo / Harmattan by smatkovi - 4 days, 11 hrs ago
N900 is not recognizable on any of my devices (windows 10,7, xp) What can I do? (1)
to Nokia N900 by nieldk - 6 days, 17 hrs ago
more...

Page 4 of 8

Thread Tools

festivalnut	2010-12-15 , 18:25
Posts: 889 \| Thanked: 537 times \| Joined on Mar 2010 @ scotland	#31

Originally Posted by richard.lawry

sorry subcore, as i told you i am new to XTerm
when type the second command it gives some error that file cannot be found...
can u make a simple file so that clicking on it it will automaticaly start installation process

make sure the downloaded file is in MyDocs (main n900 memory) not in a folder, OR amend the command to point to wherever u saved the file to.

__________________
sarcasm may be the lowest form of wit, but its the only wit i have.

its a sad day when i can't slip at least one hitchhiker reference in somewhere.

Quote & Reply |

gsever	2010-12-15 , 18:30
Banned \| Posts: 388 \| Thanked: 57 times \| Joined on Mar 2010	#32

Originally Posted by SubCore

download the file and put it on your N900's memory.
then start XTerm and execute these commands:
Code:
cd /home/user/MyDocs
tar -xzvf Doktu.tar.gz
cp Doktu /home/user
chmod +x /home/user/Doktu
then you can start the program by typing
Code:
/home/user/Doktu

Doktu should read as Dukto. o and u switch place.

./Dukto
-sh: ./Dukto: Permission denied error

When I run it as root:

sh Dukto

gives me
Dukto: line 1: syntax error: word unexpected (expecting ")")

Any extra dependency required to be installed?

Quote & Reply |

	colm.smyth	2010-12-15 , 20:24
	Posts: 334 \| Thanked: 94 times \| Joined on May 2010 @ Ireland	#33

this a brilliant thread all, just goes to show where an idea can be taken, well done to the OP and especially to SubCore for doing this, cant wait for this to be in the repositories.

Please keep this thread going all

__________________
Ireland's Technology Blog

Quote & Reply |

richard.lawry	2010-12-16 , 00:18
Posts: 39 \| Thanked: 6 times \| Joined on Dec 2010	#34

Originally Posted by gsever

Doktu should read as Dukto. o and u switch place.

./Dukto
-sh: ./Dukto: Permission denied error

When I run it as root:

sh Dukto

gives me
Dukto: line 1: syntax error: word unexpected (expecting ")")

Any extra dependency required to be installed?

wollaah....... its working now
thanks for the spelling correction GSEVER i was totally clueless as if why its not working just didn't knew that there was a spelling mistake
thanks for all and especially SUBCORE

Last edited by richard.lawry; 2010-12-16 at 00:20.

Quote & Reply |

Laughing Man	2010-12-16 , 00:53
Posts: 4,556 \| Thanked: 1,624 times \| Joined on Dec 2007	#35

Originally Posted by travla

Just had a bit of a read up on woof, man, it looks awesome. There is no UI, but simple and complete.

How hard would it be to wrap a UI around the woof python script?

What do you mean by wrap a UI? You mean to start it? I personally have it setup as an alias in the terminal. But there's nothing stopping you from putting it as a Queen Beecon Widget, shortcutd, etc..

I then just use the personal IP address to figure out my IP. Alternatively if you have a service that resolves your external IP to a domain name, then you can just go to that one.I personally prefer using this since all you need for anyone to upload a file is a web browser.

__________________

Originally Posted by ysss

They're maemo and MeeGo...

"Meamo!" sounds like what Zorro would say to catherine zeta jones... after she slaps him for looking at her dirtily...

Quote & Reply |

	travla	2010-12-16 , 01:36
	Posts: 397 \| Thanked: 241 times \| Joined on Mar 2010 @ Melbourne, Australia	#36

Originally Posted by Laughing Man

What do you mean by wrap a UI? You mean to start it? I personally have it setup as an alias in the terminal. But there's nothing stopping you from putting it as a Queen Beecon Widget, shortcutd, etc..

I then just use the personal IP address to figure out my IP. Alternatively if you have a service that resolves your external IP to a domain name, then you can just go to that one.I personally prefer using this since all you need for anyone to upload a file is a web browser.

Okay, sorry I wasn't clearer, my bad.

Given, starting it with a desktop icon is not too difficult, using a tool such as QBW. But from what I can tell you need to specify a file, and there are user option switches at the command line too (compression type, IP, Port etc.). It would be nice if the python script downloadable via http://www.home.unix-ag.org/simon/woof.html could be "part of" an installable application. Such an application would have a user interface, which would allow you to browse to a file, set the port and IP numbers, specify compression method etc.

Hope this makes sense now, not sure how much clearer I can be.

Regards,

travla

Quote & Reply |

	SubCore	2010-12-16 , 06:52
	Posts: 850 \| Thanked: 626 times \| Joined on Sep 2009 @ Vienna, Austria	#37

Originally Posted by gsever

Doktu should read as Dukto. o and u switch place.

./Dukto
-sh: ./Dukto: Permission denied error

When I run it as root:

sh Dukto

gives me
Dukto: line 1: syntax error: word unexpected (expecting ")")

Any extra dependency required to be installed?

i don't think so... here's the output of "ldd Dukto":

Code:

	libQtBearer.so.1 => /usr/lib/libQtBearer.so.1 (0x40025000)
	libQtSystemInfo.so.1 => /usr/lib/libQtSystemInfo.so.1 (0x40065000)
	libQtGui.so.4 => /usr/lib/libQtGui.so.4 (0x400c5000)
	libQtNetwork.so.4 => /usr/lib/libQtNetwork.so.4 (0x40be3000)
	libQtDBus.so.4 => /usr/lib/libQtDBus.so.4 (0x40d40000)
	libQtXml.so.4 => /usr/lib/libQtXml.so.4 (0x40de3000)
	libQtCore.so.4 => /usr/lib/libQtCore.so.4 (0x40e3b000)
	libpthread.so.0 => /lib/libpthread.so.0 (0x41135000)
	libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x41155000)
	libm.so.6 => /lib/libm.so.6 (0x41236000)
	libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x412ac000)
	libc.so.6 => /lib/libc.so.6 (0x412be000)
	libgconf-2.so.4 => /usr/lib/libgconf-2.so.4 (0x413e3000)
	libdbus-glib-1.so.2 => /usr/lib/libdbus-glib-1.so.2 (0x41407000)
	libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0x4142a000)
	libconninet.so.0 => /usr/lib/libconninet.so.0 (0x4146b000)
	libdbus-1.so.3 => /usr/lib/libdbus-1.so.3 (0x41494000)
	libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x414d1000)
	libXrandr.so.2 => /usr/lib/libXrandr.so.2 (0x41b78000)
	libgthread-2.0.so.0 => /usr/lib/libgthread-2.0.so.0 (0x415ad000)
	librt.so.1 => /lib/librt.so.1 (0x415b9000)
	libpng12.so.0 => /usr/lib/libpng12.so.0 (0x415c8000)
	libz.so.1 => /usr/lib/libz.so.1 (0x415f0000)
	libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x41750000)
	libEGL.so => /usr/lib/libEGL.so (0x41608000)
	libSM.so.6 => /usr/lib/libSM.so.6 (0x44e68000)
	libICE.so.6 => /usr/lib/libICE.so.6 (0x44d28000)
	libXrender.so.1 => /usr/lib/libXrender.so.1 (0x41988000)
	libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0x417c8000)
	libXext.so.6 => /usr/lib/libXext.so.6 (0x41968000)
	libX11.so.6 => /usr/lib/libX11.so.6 (0x41612000)
	libdl.so.2 => /lib/libdl.so.2 (0x41701000)
	/lib/ld-linux.so.3 (0x40000000)
	libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0 (0x4170c000)
	libgq-gconf.so.0 => /usr/lib/libgq-gconf.so.0 (0x41717000)
	libconnsettings.so.0 => /usr/lib/libconnsettings.so.0 (0x41720000)
	libIMGegl.so => /usr/lib/libIMGegl.so (0x4172d000)
	libexpat.so.1 => /usr/lib/libexpat.so.1 (0x417f1000)
	libXau.so.6 => /usr/lib/libXau.so.6 (0x41742000)
	libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x41817000)
	libsrv_um.so => /usr/lib/libsrv_um.so (0x41823000)

all of these should be standard IMO...

are you sure you made it executable? without the +x flag, you get "Permission denied", so it's probably that...
and it's not a shell script, so "sh Dukto" won't work.

__________________
"What we perceive is not nature itself, but nature exposed to our method of questioning."
-- Werner Karl Heisenberg

Quote & Reply |

gsever	2010-12-16 , 18:54
Banned \| Posts: 388 \| Thanked: 57 times \| Joined on Mar 2010	#38

@SubCore,

I can't seem to give exec permission by chmod +x Dukto, either in user or root mode. The command runs but ls -l Dukto doesn't show x in the listing. Very interesting. Any ideas?

Quote & Reply |

Veleno	2010-12-17 , 04:41
Posts: 73 \| Thanked: 141 times \| Joined on Oct 2010	#39

I wrote to the developer and waiting to give me the permission to use his name and version of the software in a package, I've created a .deb for easy installation and have a launcher in the menu

Install whit dpkg

root
cd /home/user/MyDocs (if you download the package in MyDocs)
dpkg -i dukto.deb

Done

Attached Files

dukto.deb (64.6 KB, 193 views)

Quote & Reply |

The Following 7 Users Say Thank You to Veleno For This Useful Post:
festivalnut, Minhaz, Natan_xy, pistachio, SubCore, xman, zimon

richard.lawry	2010-12-17 , 18:26
Posts: 39 \| Thanked: 6 times \| Joined on Dec 2010	#40

Originally Posted by Veleno

I wrote to the developer and waiting to give me the permission to use his name and version of the software in a package, I've created a .deb for easy installation and have a launcher in the menu

Install whit dpkg

root
cd /home/user/MyDocs (if you download the package in MyDocs)
dpkg -i dukto.deb

Done

hey veleno thanks for the amazing work you've done...

Quote & Reply |

Page 4 of 8

Active Topics

Notices