Active Topics
-
The N900 is now 15 years old! (9)
to Nokia N900 by Arno_11 - 14 hrs, 11 mins ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 6 days, 2 hrs ago - more...
jakemaheu |
2008-12-12
, 22:56
|
|
Posts: 62 |
Thanked: 35 times |
Joined on Mar 2008
@ Fort Gratiot, Michigan
|
#91
|
Originally Posted by jakemaheu
Lol nevermind, I fixed it.
|
|
2008-12-12
, 23:29
|
|
Posts: 1,213 |
Thanked: 356 times |
Joined on Jan 2008
@ California and Virginia
|
#92
|
Solca, you are a boss!
Working very well now, smooth and solid, feels like Beta quality! Very good job! WiFi now working, and the browser is hella good. Using it to write this. Only a few thing left before this becomes ready for prime time, seriously. Very, Very nice......
Working very well now, smooth and solid, feels like Beta quality! Very good job! WiFi now working, and the browser is hella good. Using it to write this. Only a few thing left before this becomes ready for prime time, seriously. Very, Very nice......
__________________
----------------------------------------------------
www.ezschool.com - The best online educational experience.
----------------------------------------------------
www.ezschool.com - The best online educational experience.
|
|
2008-12-12
, 23:30
|
|
Posts: 1,213 |
Thanked: 356 times |
Joined on Jan 2008
@ California and Virginia
|
#93
|
Edit:
Sigh, double posted (my bad...)
Anyway, the time still does not work. Its really tripping me out...
Discovery:
The device works without the battery. So, you can run with just AC power. Thats awesome!
Last edited by Thesandlord; 2008-12-13 at 00:02.
Sigh, double posted (my bad...)
Anyway, the time still does not work. Its really tripping me out...
Discovery:
The device works without the battery. So, you can run with just AC power. Thats awesome!
__________________
----------------------------------------------------
www.ezschool.com - The best online educational experience.
----------------------------------------------------
www.ezschool.com - The best online educational experience.
Last edited by Thesandlord; 2008-12-13 at 00:02.
| The Following 2 Users Say Thank You to Thesandlord For This Useful Post: | ||
 |
|
2008-12-12
, 23:42
|
|
Posts: 4,708 |
Thanked: 4,649 times |
Joined on Oct 2007
@ Bulgaria
|
#94
|
Originally Posted by solca
Checked. Similar to v2 of rc7 and the thin line with the difference of getting in a quite fast reboot loop with only way to stop it to get the battery out. Is there any reason for the kernel to be 500k bigger?
Bundyo: can you check the new kernel (v2) for N770? If this one does not work N770 support in latest kernels is completelly b0rked.
__________________
Technically, there are three determinate states the cat could be in: Alive, Dead, and Bloody Furious.
Technically, there are three determinate states the cat could be in: Alive, Dead, and Bloody Furious.
|
|
2008-12-13
, 00:39
|
|
Posts: 16 |
Thanked: 1 time |
Joined on Jun 2007
|
#95
|
I was finally able to capture to connect with adb. Here is the dmesg output
jacksonr@SpinDizzy:~/Documents/nokia$ sudo ./adb.x86 shell#
#
# dmesg
<5>Linux version 2.6.28-rc8-omap1 (solca@solgonzdesk) (gcc version 4.2.1) #5 PREEMPT Thu Dec 11 21:17:24 CST 2008
<4>CPU: ARMv6-compatible processor [4107b362] revision 2 (ARMv6TEJ), cr=00c5387f
<4>CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
<4>Machine: Nokia N800
<4>Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 32768
<7>free_area_init_node: node 0, pgdat c03485a8, node_mem_map c03ff000
<7> Normal zone: 256 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 32512 pages, LIFO batch:7
<7> Movable zone: 0 pages used for memmap
<6>OMAP2420<6>
<6>SRAM: Mapped pa 0x40200000 to va 0xe3000000 size: 0x100000
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
<5>Kernel command line: 115200n8 root=/dev/mmcblk0p3 ro rootfstype=ext3 rootwait init=/init
<6>Clocking rate (Crystal/DPLL/MPU): 19.2/658/329 MHz
<6>GPMC revision 2.0
<6>IRQ: Found an INTC at 0xd80fe000 (revision 2.0) with 96 interrupts
<6>Total of 96 interrupts on 1 active controller
<3>Clock gpios_ick didn't enable in 100000 tries
<3>Clock gpios_fck didn't enable in 100000 tries
<6>OMAP242x GPIO hardware version 1.8
<4>PID hash table entries: 512 (order: 9, 2048 bytes)
<6>OMAP clockevent source: GPTIMER1 at 32000 Hz
<4>Console: colour dummy device 80x30
<6>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>Memory: 64MB 64MB = 128MB total
<5>Memory: 125696KB available (3028K code, 901K data, 124K init)
<6>SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>Calibrating delay loop... 320.37 BogoMIPS (lpj=1253376)
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>net_namespace: 288 bytes
<6>NET: Registered protocol family 16
<4>MUX: setup H18_24XX_MMC_CMD (0xd80000f4): 0x0018 -> 0x0000
<4>MUX: setup H15_24XX_MMC_CLKI (0xd80000fe): 0x0008 -> 0x0000
<4>MUX: setup F20_24XX_MMC_DAT0 (0xd80000f5): 0x0018 -> 0x0000
<4>MUX: setup H14_24XX_MMC_DAT1 (0xd80000f6): 0x0018 -> 0x0000
<4>MUX: setup E19_24XX_MMC_DAT2 (0xd80000f7): 0x0018 -> 0x0000
<4>MUX: setup D19_24XX_MMC_DAT3 (0xd80000f8): 0x0018 -> 0x0000
<4>MUX: setup AA10_242X_DMAREQ0 (0xd80000e5): 0x001a -> 0x0002
<4>MUX: setup AA6_242X_DMAREQ1 (0xd80000e6): 0x001a -> 0x0002
<4>MUX: setup E4_242X_DMAREQ2 (0xd8000074): 0x001a -> 0x0002
<4>MUX: setup G4_242X_DMAREQ3 (0xd8000073): 0x001a -> 0x0002
<4>MUX: setup D3_242X_DMAREQ4 (0xd8000072): 0x001a -> 0x0002
<4>MUX: setup E3_242X_DMAREQ5 (0xd8000071): 0x001a -> 0x0002
<6>TUSB 6010
<4>MUX: setup H19_24XX_I2C2_SDA (0xd8000114): 0x0018 -> 0x0000
<4>MUX: setup J15_24XX_I2C2_SCL (0xd8000113): 0x0018 -> 0x0010
<6>OMAP DMA hardware revision 2.0
<6>omap_dsp_init() done
<4>omap2_clk_init_cpufreq_table: failed to initialize frequency table
<3>USB: No board-specific platform config found
<6>OMAP STI support loaded (HW v1.0)
<6>Tahvo/Betty driver initialising
<6>Betty v2.1 found
<6>Retu/Vilma driver initialising
<6>Vilma v1.5 found
<6>i2c_omap i2c_omap.1: bus 1 rev3.4 at 400 kHz
<6>i2c_omap i2c_omap.2: bus 2 rev3.4 at 400 kHz
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>musb_hdrc: version 6.0, tusb-omap-dma, otg (peripheral+host), debug=0
<6>tusb: prcm2.0 int2.0 gpio2.0 dma2.0 dieid0 rev2.0
<4>drivers/usb/musb/tusb6010.c musb_platform_disable: dma still active
jacksonr@SpinDizzy:~/Documents/nokia$ sudo ./adb.x86 shell#
#
# dmesg
<5>Linux version 2.6.28-rc8-omap1 (solca@solgonzdesk) (gcc version 4.2.1) #5 PREEMPT Thu Dec 11 21:17:24 CST 2008
<4>CPU: ARMv6-compatible processor [4107b362] revision 2 (ARMv6TEJ), cr=00c5387f
<4>CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
<4>Machine: Nokia N800
<4>Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 32768
<7>free_area_init_node: node 0, pgdat c03485a8, node_mem_map c03ff000
<7> Normal zone: 256 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 32512 pages, LIFO batch:7
<7> Movable zone: 0 pages used for memmap
<6>OMAP2420<6>
<6>SRAM: Mapped pa 0x40200000 to va 0xe3000000 size: 0x100000
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
<5>Kernel command line: 115200n8 root=/dev/mmcblk0p3 ro rootfstype=ext3 rootwait init=/init
<6>Clocking rate (Crystal/DPLL/MPU): 19.2/658/329 MHz
<6>GPMC revision 2.0
<6>IRQ: Found an INTC at 0xd80fe000 (revision 2.0) with 96 interrupts
<6>Total of 96 interrupts on 1 active controller
<3>Clock gpios_ick didn't enable in 100000 tries
<3>Clock gpios_fck didn't enable in 100000 tries
<6>OMAP242x GPIO hardware version 1.8
<4>PID hash table entries: 512 (order: 9, 2048 bytes)
<6>OMAP clockevent source: GPTIMER1 at 32000 Hz
<4>Console: colour dummy device 80x30
<6>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>Memory: 64MB 64MB = 128MB total
<5>Memory: 125696KB available (3028K code, 901K data, 124K init)
<6>SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>Calibrating delay loop... 320.37 BogoMIPS (lpj=1253376)
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>net_namespace: 288 bytes
<6>NET: Registered protocol family 16
<4>MUX: setup H18_24XX_MMC_CMD (0xd80000f4): 0x0018 -> 0x0000
<4>MUX: setup H15_24XX_MMC_CLKI (0xd80000fe): 0x0008 -> 0x0000
<4>MUX: setup F20_24XX_MMC_DAT0 (0xd80000f5): 0x0018 -> 0x0000
<4>MUX: setup H14_24XX_MMC_DAT1 (0xd80000f6): 0x0018 -> 0x0000
<4>MUX: setup E19_24XX_MMC_DAT2 (0xd80000f7): 0x0018 -> 0x0000
<4>MUX: setup D19_24XX_MMC_DAT3 (0xd80000f8): 0x0018 -> 0x0000
<4>MUX: setup AA10_242X_DMAREQ0 (0xd80000e5): 0x001a -> 0x0002
<4>MUX: setup AA6_242X_DMAREQ1 (0xd80000e6): 0x001a -> 0x0002
<4>MUX: setup E4_242X_DMAREQ2 (0xd8000074): 0x001a -> 0x0002
<4>MUX: setup G4_242X_DMAREQ3 (0xd8000073): 0x001a -> 0x0002
<4>MUX: setup D3_242X_DMAREQ4 (0xd8000072): 0x001a -> 0x0002
<4>MUX: setup E3_242X_DMAREQ5 (0xd8000071): 0x001a -> 0x0002
<6>TUSB 6010
<4>MUX: setup H19_24XX_I2C2_SDA (0xd8000114): 0x0018 -> 0x0000
<4>MUX: setup J15_24XX_I2C2_SCL (0xd8000113): 0x0018 -> 0x0010
<6>OMAP DMA hardware revision 2.0
<6>omap_dsp_init() done
<4>omap2_clk_init_cpufreq_table: failed to initialize frequency table
<3>USB: No board-specific platform config found
<6>OMAP STI support loaded (HW v1.0)
<6>Tahvo/Betty driver initialising
<6>Betty v2.1 found
<6>Retu/Vilma driver initialising
<6>Vilma v1.5 found
<6>i2c_omap i2c_omap.1: bus 1 rev3.4 at 400 kHz
<6>i2c_omap i2c_omap.2: bus 2 rev3.4 at 400 kHz
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>musb_hdrc: version 6.0, tusb-omap-dma, otg (peripheral+host), debug=0
<6>tusb: prcm2.0 int2.0 gpio2.0 dma2.0 dieid0 rev2.0
<4>drivers/usb/musb/tusb6010.c musb_platform_disable: dma still active
|
|
2008-12-13
, 00:42
|
|
Posts: 16 |
Thanked: 1 time |
Joined on Jun 2007
|
#96
|
Here is some more
<7>musb_hdrc: ConfigData=0x06 (UTMI-8, dyn FIFOs, SoftConn)
<7>musb_hdrc: MHDRC RTL version 1.400
<7>musb_hdrc: setup fifo_mode 4
<7>musb_hdrc: 29/31 max ep, 15424/16384 memory
<7>musb_hdrc: hw_ep 0shared, max 64
<7>musb_hdrc: hw_ep 1tx, max 512
<7>musb_hdrc: hw_ep 1rx, max 512
<7>musb_hdrc: hw_ep 2tx, max 512
<7>musb_hdrc: hw_ep 2rx, max 512
<7>musb_hdrc: hw_ep 3tx, max 512
<7>musb_hdrc: hw_ep 3rx, max 512
<7>musb_hdrc: hw_ep 4tx, max 512
<7>musb_hdrc: hw_ep 4rx, max 512
<7>musb_hdrc: hw_ep 5tx, max 512
<7>musb_hdrc: hw_ep 5rx, max 512
<7>musb_hdrc: hw_ep 6tx, max 512
<7>musb_hdrc: hw_ep 6rx, max 512
<7>musb_hdrc: hw_ep 7tx, max 512
<7>musb_hdrc: hw_ep 7rx, max 512
<7>musb_hdrc: hw_ep 8tx, max 512
<7>musb_hdrc: hw_ep 8rx, max 512
<7>musb_hdrc: hw_ep 9tx, max 512
<7>musb_hdrc: hw_ep 9rx, max 512
<7>musb_hdrc: hw_ep 10tx, max 512
<7>musb_hdrc: hw_ep 10rx, max 512
<7>musb_hdrc: hw_ep 11tx, max 512
<7>musb_hdrc: hw_ep 11rx, max 512
<7>musb_hdrc: hw_ep 12tx, max 512
<7>musb_hdrc: hw_ep 12rx, max 512
<7>musb_hdrc: hw_ep 13tx, max 512
<7>musb_hdrc: hw_ep 13rx, max 512
<7>musb_hdrc: hw_ep 14shared, max 1024
<7>musb_hdrc: hw_ep 15shared, max 1024
<6>musb_hdrc: USB OTG mode controller at c8808000 using DMA, IRQ 218
<6>Bluetooth: Core ver 2.13
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>cfg80211: Using static regulatory domain info
<6>cfg80211: Regulatory domain: US
<6> (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6> (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
<6> (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
<6>cfg80211: Calling CRDA for country: US
<6>NET: Registered protocol family 2
<7>Switched to high resolution mode on CPU 0
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>ashmem: initialized
<6>JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
<6>msgmni has been set to 245
<6>alg: No test for stdrng (krng)
<6>io scheduler noop registered (default)
<6>omapfb: ls041y3 rev 8f LCD detected
<6>omapfb: configured for panel ls041y3
<6>omapfb: DISPC version 2.0 initialized
<6>omapfb: RFBI version 1.0 initialized
<6>omapfb: s1d13745 LCD controller rev 1 initialized (CNF pins 3)
<6>omapfb omapfb: s1d1374x: setting update mode to auto
<6>omapfb: Framebuffer initialized. Total vram 2310144 planes 3
<6>omapfb: Pixclock 21940 kHz hfreq 24.9 kHz vfreq 51.0 Hz
<6>omap_rng omap_rng: OMAP Random Number Generator ver. 40
<6>Serial: 8250/16550 driver4 ports, IRQ sharing disabled
<6>serial8250.0: ttyS0 at MMIO 0x4806e000 (irq = 74) is a ST16654
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>Linux video capture interface: v2.00
<6>Retu power button driver initialized
<6>retu: Registering interrupt 0 for device PwrOnX
<6>input: retu-pwrbutton as /class/input/input0
<6>retu: Registering interrupt 2 for device RTCS
<6>retu: Registering interrupt 5 for device RTCA
<6>Retu watchdog driver initialized
<6>Retu/Vilma headset driver initializing
<6>menelaus 1-0072: Menelaus rev 2.2
<6>dsp dsp: OMAP DSP driver initialization
<4>Driver 'sd' needs updating - please use bus_type methods
<6>OneNAND driver initializing
<6>omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base c88c0000
<7>OneNAND Manufacturer: Samsung (0xec)
<6>Muxed OneNAND(DDP) 256MB 1.8V 16-bit (0x48)
<6>OneNAND version = 0x0011
<7>Chip support all block unlock
<3>onenand_wait: controller error! state 5 ctrl 0x0440 intr 0x8000
<6>Scanning device for bad blocks
<6>onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
<4>Bad eraseblock 1084 at 0x08780000
<6>onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
<4>Bad eraseblock 1515 at 0x0bd60000
<6>onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
<4>Bad eraseblock 1699 at 0x0d460000
<6>onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
<4>Bad eraseblock 1759 at 0x0dbe0000
<5>Creating 5 MTD partitions on "omap2-onenand":
<5>0x00000000-0x00020000 : "bootloader"
<5>0x00020000-0x00080000 : "config"
<5>0x00080000-0x00280000 : "kernel"
<5>0x00280000-0x00680000 : "initfs"
<5>0x00680000-0x10000000 : "rootfs"
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver libusual
<6>android adb driver
<6>musb_hdrc musb_hdrc: MUSB HDRC host driver
<6>musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<4>drivers/usb/musb/tusb6010.c musb_platform_enable: dma not reactivated
<6>TSC2005 driver initializing
<6>OMAP Watchdog Timer Rev 0x11: initial timeout 60 sec
<6>hci_h4p hci_h4p: Registering HCI H4P device
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<7>musb_hdrc: ConfigData=0x06 (UTMI-8, dyn FIFOs, SoftConn)
<7>musb_hdrc: MHDRC RTL version 1.400
<7>musb_hdrc: setup fifo_mode 4
<7>musb_hdrc: 29/31 max ep, 15424/16384 memory
<7>musb_hdrc: hw_ep 0shared, max 64
<7>musb_hdrc: hw_ep 1tx, max 512
<7>musb_hdrc: hw_ep 1rx, max 512
<7>musb_hdrc: hw_ep 2tx, max 512
<7>musb_hdrc: hw_ep 2rx, max 512
<7>musb_hdrc: hw_ep 3tx, max 512
<7>musb_hdrc: hw_ep 3rx, max 512
<7>musb_hdrc: hw_ep 4tx, max 512
<7>musb_hdrc: hw_ep 4rx, max 512
<7>musb_hdrc: hw_ep 5tx, max 512
<7>musb_hdrc: hw_ep 5rx, max 512
<7>musb_hdrc: hw_ep 6tx, max 512
<7>musb_hdrc: hw_ep 6rx, max 512
<7>musb_hdrc: hw_ep 7tx, max 512
<7>musb_hdrc: hw_ep 7rx, max 512
<7>musb_hdrc: hw_ep 8tx, max 512
<7>musb_hdrc: hw_ep 8rx, max 512
<7>musb_hdrc: hw_ep 9tx, max 512
<7>musb_hdrc: hw_ep 9rx, max 512
<7>musb_hdrc: hw_ep 10tx, max 512
<7>musb_hdrc: hw_ep 10rx, max 512
<7>musb_hdrc: hw_ep 11tx, max 512
<7>musb_hdrc: hw_ep 11rx, max 512
<7>musb_hdrc: hw_ep 12tx, max 512
<7>musb_hdrc: hw_ep 12rx, max 512
<7>musb_hdrc: hw_ep 13tx, max 512
<7>musb_hdrc: hw_ep 13rx, max 512
<7>musb_hdrc: hw_ep 14shared, max 1024
<7>musb_hdrc: hw_ep 15shared, max 1024
<6>musb_hdrc: USB OTG mode controller at c8808000 using DMA, IRQ 218
<6>Bluetooth: Core ver 2.13
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>cfg80211: Using static regulatory domain info
<6>cfg80211: Regulatory domain: US
<6> (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6> (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
<6> (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
<6>cfg80211: Calling CRDA for country: US
<6>NET: Registered protocol family 2
<7>Switched to high resolution mode on CPU 0
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>ashmem: initialized
<6>JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
<6>msgmni has been set to 245
<6>alg: No test for stdrng (krng)
<6>io scheduler noop registered (default)
<6>omapfb: ls041y3 rev 8f LCD detected
<6>omapfb: configured for panel ls041y3
<6>omapfb: DISPC version 2.0 initialized
<6>omapfb: RFBI version 1.0 initialized
<6>omapfb: s1d13745 LCD controller rev 1 initialized (CNF pins 3)
<6>omapfb omapfb: s1d1374x: setting update mode to auto
<6>omapfb: Framebuffer initialized. Total vram 2310144 planes 3
<6>omapfb: Pixclock 21940 kHz hfreq 24.9 kHz vfreq 51.0 Hz
<6>omap_rng omap_rng: OMAP Random Number Generator ver. 40
<6>Serial: 8250/16550 driver4 ports, IRQ sharing disabled
<6>serial8250.0: ttyS0 at MMIO 0x4806e000 (irq = 74) is a ST16654
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>Linux video capture interface: v2.00
<6>Retu power button driver initialized
<6>retu: Registering interrupt 0 for device PwrOnX
<6>input: retu-pwrbutton as /class/input/input0
<6>retu: Registering interrupt 2 for device RTCS
<6>retu: Registering interrupt 5 for device RTCA
<6>Retu watchdog driver initialized
<6>Retu/Vilma headset driver initializing
<6>menelaus 1-0072: Menelaus rev 2.2
<6>dsp dsp: OMAP DSP driver initialization
<4>Driver 'sd' needs updating - please use bus_type methods
<6>OneNAND driver initializing
<6>omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base c88c0000
<7>OneNAND Manufacturer: Samsung (0xec)
<6>Muxed OneNAND(DDP) 256MB 1.8V 16-bit (0x48)
<6>OneNAND version = 0x0011
<7>Chip support all block unlock
<3>onenand_wait: controller error! state 5 ctrl 0x0440 intr 0x8000
<6>Scanning device for bad blocks
<6>onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
<4>Bad eraseblock 1084 at 0x08780000
<6>onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
<4>Bad eraseblock 1515 at 0x0bd60000
<6>onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
<4>Bad eraseblock 1699 at 0x0d460000
<6>onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
<4>Bad eraseblock 1759 at 0x0dbe0000
<5>Creating 5 MTD partitions on "omap2-onenand":
<5>0x00000000-0x00020000 : "bootloader"
<5>0x00020000-0x00080000 : "config"
<5>0x00080000-0x00280000 : "kernel"
<5>0x00280000-0x00680000 : "initfs"
<5>0x00680000-0x10000000 : "rootfs"
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver libusual
<6>android adb driver
<6>musb_hdrc musb_hdrc: MUSB HDRC host driver
<6>musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<4>drivers/usb/musb/tusb6010.c musb_platform_enable: dma not reactivated
<6>TSC2005 driver initializing
<6>OMAP Watchdog Timer Rev 0x11: initial timeout 60 sec
<6>hci_h4p hci_h4p: Registering HCI H4P device
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
|
|
2008-12-13
, 00:43
|
|
Posts: 16 |
Thanked: 1 time |
Joined on Jun 2007
|
#97
|
Here is the rest
<6>omap_pwm_led omap_pwm_led: OMAP PWM LED (keypad) at GP timer 10/9
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<6>Registered led device: keypad
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<6>logger: created 64K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 64K log 'log_radio'
<6>Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
<6>ASoC version 0.13.2
<6>ALSA device list:
<6> No soundcards found.
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<6>Bluetooth: L2CAP ver 2.11
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO (Voice Link) ver 0.6
<6>Bluetooth: SCO socket layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM ver 1.10
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>Power Management for OMAP2 initializing
<6>PRCM revision 1.0
<6>Disabling unused clock "uart2_fck"
<6>Disabling unused clock "uart2_ick"
<6>Disabling unused clock "gpt12_fck"
<6>Disabling unused clock "gpt12_ick"
<6>Disabling unused clock "gpt11_fck"
<6>Disabling unused clock "gpt11_ick"
<6>Disabling unused clock "gpt8_fck"
<6>Disabling unused clock "gpt8_ick"
<6>Disabling unused clock "gpt7_fck"
<6>Disabling unused clock "gpt7_ick"
<6>Disabling unused clock "gpt6_fck"
<6>Disabling unused clock "gpt6_ick"
<6>Disabling unused clock "gpt5_fck"
<6>Disabling unused clock "gpt5_ick"
<6>Disabling unused clock "gpt4_fck"
<6>Disabling unused clock "gpt4_ick"
<6>Disabling unused clock "gpt3_fck"
<6>Disabling unused clock "gpt3_ick"
<6>Disabling unused clock "gpt2_fck"
<6>Disabling unused clock "gpt2_ick"
<6>Disabling unused clock "dss2_fck"
<6>Bootup reason: charger
<6>OMAP GPIO switch handler initializing
<6>headphone (GPIO 107) is now disconnected
<6>cam_turn (GPIO 12) is now inactive
<6>cam_act (GPIO 95) is now inactive
<6>bat_cover (GPIO 110) is now closed
<6>VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2
<4>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>Waiting for root device /dev/mmcblk0p3...
<4>mmc0: host does not support reading read-only switch. assuming write-enable.
<6>mmc0: new SD card at address b368
<6>mmcblk0: mmc0:b368 SDC 3.83 GiB
<6> mmcblk0: p1 p3
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD1)
<3>mmci-omap mmci-omap.0: command timeout (CMD1)
<6>EXT3-fs: INFO: recovery required on readonly filesystem.
<6>EXT3-fs: write access will be enabled during recovery.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3-fs: recovery complete.
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>VFS: Mounted root (ext3 filesystem) readonly.
<6>Freeing init memory: 124K
<4>Warning: unable to open an initial console.
<6>EXT3 FS on mmcblk0p3, internal journal
<3>init: cannot find '/system/bin/playmp3', disabling 'bootsound'
<6>warning: `app_process' uses 32-bit capabilities (legacy support in use)
# jacksonr@SpinDizzy:~/Documents/nokia$
Hopefully this helps
By the way, I really appreciate the work that you have done solca
very fine work!
<6>omap_pwm_led omap_pwm_led: OMAP PWM LED (keypad) at GP timer 10/9
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<6>Registered led device: keypad
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<6>logger: created 64K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 64K log 'log_radio'
<6>Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
<6>ASoC version 0.13.2
<6>ALSA device list:
<6> No soundcards found.
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<6>Bluetooth: L2CAP ver 2.11
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO (Voice Link) ver 0.6
<6>Bluetooth: SCO socket layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM ver 1.10
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>Power Management for OMAP2 initializing
<6>PRCM revision 1.0
<6>Disabling unused clock "uart2_fck"
<6>Disabling unused clock "uart2_ick"
<6>Disabling unused clock "gpt12_fck"
<6>Disabling unused clock "gpt12_ick"
<6>Disabling unused clock "gpt11_fck"
<6>Disabling unused clock "gpt11_ick"
<6>Disabling unused clock "gpt8_fck"
<6>Disabling unused clock "gpt8_ick"
<6>Disabling unused clock "gpt7_fck"
<6>Disabling unused clock "gpt7_ick"
<6>Disabling unused clock "gpt6_fck"
<6>Disabling unused clock "gpt6_ick"
<6>Disabling unused clock "gpt5_fck"
<6>Disabling unused clock "gpt5_ick"
<6>Disabling unused clock "gpt4_fck"
<6>Disabling unused clock "gpt4_ick"
<6>Disabling unused clock "gpt3_fck"
<6>Disabling unused clock "gpt3_ick"
<6>Disabling unused clock "gpt2_fck"
<6>Disabling unused clock "gpt2_ick"
<6>Disabling unused clock "dss2_fck"
<6>Bootup reason: charger
<6>OMAP GPIO switch handler initializing
<6>headphone (GPIO 107) is now disconnected
<6>cam_turn (GPIO 12) is now inactive
<6>cam_act (GPIO 95) is now inactive
<6>bat_cover (GPIO 110) is now closed
<6>VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2
<4>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>Waiting for root device /dev/mmcblk0p3...
<4>mmc0: host does not support reading read-only switch. assuming write-enable.
<6>mmc0: new SD card at address b368
<6>mmcblk0: mmc0:b368 SDC 3.83 GiB
<6> mmcblk0: p1 p3
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD1)
<3>mmci-omap mmci-omap.0: command timeout (CMD1)
<6>EXT3-fs: INFO: recovery required on readonly filesystem.
<6>EXT3-fs: write access will be enabled during recovery.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3-fs: recovery complete.
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>VFS: Mounted root (ext3 filesystem) readonly.
<6>Freeing init memory: 124K
<4>Warning: unable to open an initial console.
<6>EXT3 FS on mmcblk0p3, internal journal
<3>init: cannot find '/system/bin/playmp3', disabling 'bootsound'
<6>warning: `app_process' uses 32-bit capabilities (legacy support in use)
# jacksonr@SpinDizzy:~/Documents/nokia$
Hopefully this helps
By the way, I really appreciate the work that you have done solca
very fine work!
|
|
2008-12-13
, 04:09
|
|
Posts: 9 |
Thanked: 1 time |
Joined on Dec 2008
|
#98
|
Originally Posted by jakemaheu
How? Mine still won't flash.
Lol nevermind, I fixed it.
Edit: I fixed it. Apparently, I was forgetting the -F part of the flasher line.
Last edited by soupus; 2008-12-13 at 04:58.
|
|
2008-12-13
, 04:19
|
|
Posts: 9 |
Thanked: 1 time |
Joined on Dec 2008
|
#99
|
Here is the logcat of my device. Looks like something to do with the sound server?
I/DEBUG ( 604): Build fingerprint: 'nokia/nit/nit/:1.0/TC3/eng.solca.20081212.004149:eng/test-keys'
I/DEBUG ( 604): pid: 699, tid: 699 >>> /system/bin/mediaserver <<<
I/DEBUG ( 604): signal 11 (SIGSEGV), fault addr 00000010
I/DEBUG ( 604): r0 00000000 r1 ab749e8c r2 0000ac78 r3 00000000
I/DEBUG ( 604): r4 0000ac78 r5 ab753080 r6 ab753be4 r7 00000000
I/DEBUG ( 604): r8 0000ac78 r9 00000000 10 00000000 fp be951b3c
I/DEBUG ( 604): ip 00000018 sp be951a98 lr ab715d30 pc ab722ff8 cpsr 00000010
I/DEBUG ( 604): #00 pc ab722ff8 /system/lib/libaudio.so
I/DEBUG ( 604): #01 pc ab715d2c /system/lib/libaudio.so
I/DEBUG ( 604): #02 pc ab716044 /system/lib/libaudio.so
I/DEBUG ( 604): #03 pc ab713c8c /system/lib/libaudio.so
I/DEBUG ( 604): #04 pc ab0116be /system/lib/libaudioflinger.so
I/DEBUG ( 604): #05 pc ab011828 /system/lib/libaudioflinger.so
I/DEBUG ( 604): #06 pc 0000875c /system/bin/mediaserver
I/DEBUG ( 604): #07 pc afe1e0aa /system/lib/libc.so
I/DEBUG ( 604): #08 pc afe0b09c /system/lib/libc.so
I/DEBUG ( 604): #09 pc b0000d70 /system/bin/linker
I/DEBUG ( 604): stack:
I/DEBUG ( 604): be951a58 00000013
I/DEBUG ( 604): be951a5c afe20821 /system/lib/libc.so
I/DEBUG ( 604): be951a60 ab749e88 /system/lib/libaudio.so
I/DEBUG ( 604): be951a64 0000ad79 [heap]
I/DEBUG ( 604): be951a68 00000000
I/DEBUG ( 604): be951a6c 0000ac78 [heap]
I/DEBUG ( 604): be951a70 00000000
I/DEBUG ( 604): be951a74 00000000
I/DEBUG ( 604): be951a78 be951b3c [stack]
I/DEBUG ( 604): be951a7c 0000ad79 [heap]
I/DEBUG ( 604): be951a80 00000003
I/DEBUG ( 604): be951a84 afb05ad7 /system/lib/libcutils.so
I/DEBUG ( 604): be951a88 0000ac78 [heap]
I/DEBUG ( 604): be951a8c ab753080 /system/lib/libaudio.so
I/DEBUG ( 604): be951a90 df002777
I/DEBUG ( 604): be951a94 e3a070ad
I/DEBUG ( 604): #01 be951a98 00000000
I/DEBUG ( 604): be951a9c 00000000
I/DEBUG ( 604): be951aa0 00000000
I/DEBUG ( 604): be951aa4 00000000
I/DEBUG ( 604): be951aa8 00000000
I/DEBUG ( 604): be951aac 00000000
I/DEBUG ( 604): be951ab0 00000000
I/DEBUG ( 604): be951ab4 00000000
I/DEBUG ( 604): be951ab8 00000000
I/DEBUG ( 604): be951abc 00000000
I/DEBUG ( 604): be951ac0 00000000
I/DEBUG ( 604): be951ac4 00000000
I/DEBUG ( 604): be951ac8 00000000
I/DEBUG ( 604): be951acc 00000000
I/DEBUG ( 604): be951ad0 00000000
I/DEBUG ( 604): be951ad4 00000000
I/DEBUG ( 604): be951ad8 ab753a98 /system/lib/libaudio.so
I/DEBUG ( 604): be951adc ab715c58 /system/lib/libaudio.so
I/DEBUG ( 604): be951ae0 ab753090 /system/lib/libaudio.so
I/DEBUG ( 604): be951ae4 ab753ab8 /system/lib/libaudio.so
I/DEBUG ( 604): be951ae8 ab753ab0 /system/lib/libaudio.so
I/DEBUG ( 604): be951aec ab753aa8 /system/lib/libaudio.so
I/DEBUG ( 604): be951af0 ab753080 /system/lib/libaudio.so
I/DEBUG ( 604): be951af4 be951a98 [stack]
I/DEBUG ( 604): be951af8 0000ac78 [heap]
I/DEBUG ( 604): be951afc 0000ac78 [heap]
I/DEBUG ( 604): be951b00 00000000
I/DEBUG ( 604): be951b04 0000ac78 [heap]
I/DEBUG ( 604): be951b08 000000dc
I/DEBUG ( 604): be951b0c 6391e232
I/DEBUG ( 604): be951b10 00000000
I/DEBUG ( 604): be951b14 0000ac78 [heap]
I/DEBUG ( 604): be951b18 0000ac50 [heap]
I/DEBUG ( 604): be951b1c 0000ab30 [heap]
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
I/DEBUG ( 604): be951b20 0000abe8 [heap]
I/DEBUG ( 604): be951b24 00000000
I/DEBUG ( 604): be951b28 00000000
I/DEBUG ( 604): be951b2c 00000000
I/DEBUG ( 604): be951b30 00000000
I/DEBUG ( 604): be951b34 be951b40 [stack]
I/DEBUG ( 604): be951b38 ab716048 /system/lib/libaudio.so
I/DEBUG ( 604): be951b3c ab715c04 /system/lib/libaudio.so
W/AudioSystem( 646): AudioFlinger not published, waiting...
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
I/ ( 702): ServiceManager: 0xaab8
E/AudioHardwareALSA( 702): Unable to attach mixer to device AndroidPlayback: No such file or directory
E/AudioHardwareALSA( 702): Unable to attach mixer to device default: No such file or directory
E/AudioHardwareALSA( 702): Unable to attach mixer to device AndroidRecord: No such file or directory
E/AudioHardwareALSA( 702): Unable to attach mixer to device default: No such file or directory
I/DEBUG ( 604): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
I/DEBUG ( 604): Build fingerprint: 'nokia/nit/nit/:1.0/TC3/eng.solca.20081212.004149:eng/test-keys'
I/DEBUG ( 604): pid: 702, tid: 702 >>> /system/bin/mediaserver <<<
I/DEBUG ( 604): signal 11 (SIGSEGV), fault addr 00000010
I/DEBUG ( 604): r0 00000000 r1 ab749e8c r2 0000ac78 r3 00000000
I/DEBUG ( 604): r4 0000ac78 r5 ab753080 r6 ab753be4 r7 00000000
I/DEBUG ( 604): r8 0000ac78 r9 00000000 10 00000000 fp beb79b3c
I/DEBUG ( 604): ip 00000018 sp beb79a98 lr ab715d30 pc ab722ff8 cpsr 00000010
I/DEBUG ( 604): #00 pc ab722ff8 /system/lib/libaudio.so
I/DEBUG ( 604): #01 pc ab715d2c /system/lib/libaudio.so
I/DEBUG ( 604): #02 pc ab716044 /system/lib/libaudio.so
I/DEBUG ( 604): #03 pc ab713c8c /system/lib/libaudio.so
I/DEBUG ( 604): #04 pc ab0116be /system/lib/libaudioflinger.so
I/DEBUG ( 604): #05 pc ab011828 /system/lib/libaudioflinger.so
I/DEBUG ( 604): #06 pc 0000875c /system/bin/mediaserver
I/DEBUG ( 604): #07 pc afe1e0aa /system/lib/libc.so
I/DEBUG ( 604): #08 pc afe0b09c /system/lib/libc.so
I/DEBUG ( 604): #09 pc b0000d70 /system/bin/linker
I/DEBUG ( 604): stack:
I/DEBUG ( 604): beb79a58 00000013
I/DEBUG ( 604): beb79a5c afe20821 /system/lib/libc.so
I/DEBUG ( 604): beb79a60 ab749e88 /system/lib/libaudio.so
I/DEBUG ( 604): beb79a64 0000ad79 [heap]
I/DEBUG ( 604): beb79a68 00000000
I/DEBUG ( 604): beb79a6c 0000ac78 [heap]
I/DEBUG ( 604): beb79a70 00000000
I/DEBUG ( 604): beb79a74 00000000
I/DEBUG ( 604): beb79a78 beb79b3c [stack]
I/DEBUG ( 604): beb79a7c 0000ad79 [heap]
I/DEBUG ( 604): beb79a80 00000003
I/DEBUG ( 604): beb79a84 afb05ad7 /system/lib/libcutils.so
I/DEBUG ( 604): beb79a88 0000ac78 [heap]
I/DEBUG ( 604): beb79a8c ab753080 /system/lib/libaudio.so
I/DEBUG ( 604): beb79a90 df002777
I/DEBUG ( 604): beb79a94 e3a070ad
I/DEBUG ( 604): #01 beb79a98 00000000
I/DEBUG ( 604): beb79a9c 00000000
I/DEBUG ( 604): beb79aa0 00000000
I/DEBUG ( 604): beb79aa4 00000000
I/DEBUG ( 604): beb79aa8 00000000
I/DEBUG ( 604): beb79aac 00000000
I/DEBUG ( 604): beb79ab0 00000000
I/DEBUG ( 604): beb79ab4 00000000
I/DEBUG ( 604): beb79ab8 00000000
I/DEBUG ( 604): beb79abc 00000000
I/DEBUG ( 604): beb79ac0 00000000
I/DEBUG ( 604): beb79ac4 00000000
I/DEBUG ( 604): beb79ac8 00000000
I/DEBUG ( 604): beb79acc 00000000
I/DEBUG ( 604): beb79ad0 00000000
I/DEBUG ( 604): beb79ad4 00000000
I/DEBUG ( 604): beb79ad8 ab753a98 /system/lib/libaudio.so
I/DEBUG ( 604): beb79adc ab715c58 /system/lib/libaudio.so
I/DEBUG ( 604): beb79ae0 ab753090 /system/lib/libaudio.so
I/DEBUG ( 604): beb79ae4 ab753ab8 /system/lib/libaudio.so
I/DEBUG ( 604): beb79ae8 ab753ab0 /system/lib/libaudio.so
I/DEBUG ( 604): beb79aec ab753aa8 /system/lib/libaudio.so
I/DEBUG ( 604): beb79af0 ab753080 /system/lib/libaudio.so
I/DEBUG ( 604): beb79af4 beb79a98 [stack]
I/DEBUG ( 604): beb79af8 0000ac78 [heap]
I/DEBUG ( 604): beb79afc 0000ac78 [heap]
I/DEBUG ( 604): beb79b00 00000000
I/DEBUG ( 604): beb79b04 0000ac78 [heap]
I/DEBUG ( 604): beb79b08 000000dc
I/DEBUG ( 604): beb79b0c 373468b7
I/DEBUG ( 604): beb79b10 00000000
I/DEBUG ( 604): beb79b14 0000ac78 [heap]
I/DEBUG ( 604): beb79b18 0000ac50 [heap]
I/DEBUG ( 604): beb79b1c 0000ab30 [heap]
I/DEBUG ( 604): beb79b20 0000abe8 [heap]
I/DEBUG ( 604): beb79b24 00000000
I/DEBUG ( 604): beb79b28 00000000
I/DEBUG ( 604): beb79b2c 00000000
I/DEBUG ( 604): beb79b30 00000000
I/DEBUG ( 604): beb79b34 beb79b40 [stack]
I/DEBUG ( 604): beb79b38 ab716048 /system/lib/libaudio.so
I/DEBUG ( 604): beb79b3c ab715c04 /system/lib/libaudio.so
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
W/AudioSystem( 646): AudioFlinger not published, waiting...
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
I/DEBUG ( 604): Build fingerprint: 'nokia/nit/nit/:1.0/TC3/eng.solca.20081212.004149:eng/test-keys'
I/DEBUG ( 604): pid: 699, tid: 699 >>> /system/bin/mediaserver <<<
I/DEBUG ( 604): signal 11 (SIGSEGV), fault addr 00000010
I/DEBUG ( 604): r0 00000000 r1 ab749e8c r2 0000ac78 r3 00000000
I/DEBUG ( 604): r4 0000ac78 r5 ab753080 r6 ab753be4 r7 00000000
I/DEBUG ( 604): r8 0000ac78 r9 00000000 10 00000000 fp be951b3c
I/DEBUG ( 604): ip 00000018 sp be951a98 lr ab715d30 pc ab722ff8 cpsr 00000010
I/DEBUG ( 604): #00 pc ab722ff8 /system/lib/libaudio.so
I/DEBUG ( 604): #01 pc ab715d2c /system/lib/libaudio.so
I/DEBUG ( 604): #02 pc ab716044 /system/lib/libaudio.so
I/DEBUG ( 604): #03 pc ab713c8c /system/lib/libaudio.so
I/DEBUG ( 604): #04 pc ab0116be /system/lib/libaudioflinger.so
I/DEBUG ( 604): #05 pc ab011828 /system/lib/libaudioflinger.so
I/DEBUG ( 604): #06 pc 0000875c /system/bin/mediaserver
I/DEBUG ( 604): #07 pc afe1e0aa /system/lib/libc.so
I/DEBUG ( 604): #08 pc afe0b09c /system/lib/libc.so
I/DEBUG ( 604): #09 pc b0000d70 /system/bin/linker
I/DEBUG ( 604): stack:
I/DEBUG ( 604): be951a58 00000013
I/DEBUG ( 604): be951a5c afe20821 /system/lib/libc.so
I/DEBUG ( 604): be951a60 ab749e88 /system/lib/libaudio.so
I/DEBUG ( 604): be951a64 0000ad79 [heap]
I/DEBUG ( 604): be951a68 00000000
I/DEBUG ( 604): be951a6c 0000ac78 [heap]
I/DEBUG ( 604): be951a70 00000000
I/DEBUG ( 604): be951a74 00000000
I/DEBUG ( 604): be951a78 be951b3c [stack]
I/DEBUG ( 604): be951a7c 0000ad79 [heap]
I/DEBUG ( 604): be951a80 00000003
I/DEBUG ( 604): be951a84 afb05ad7 /system/lib/libcutils.so
I/DEBUG ( 604): be951a88 0000ac78 [heap]
I/DEBUG ( 604): be951a8c ab753080 /system/lib/libaudio.so
I/DEBUG ( 604): be951a90 df002777
I/DEBUG ( 604): be951a94 e3a070ad
I/DEBUG ( 604): #01 be951a98 00000000
I/DEBUG ( 604): be951a9c 00000000
I/DEBUG ( 604): be951aa0 00000000
I/DEBUG ( 604): be951aa4 00000000
I/DEBUG ( 604): be951aa8 00000000
I/DEBUG ( 604): be951aac 00000000
I/DEBUG ( 604): be951ab0 00000000
I/DEBUG ( 604): be951ab4 00000000
I/DEBUG ( 604): be951ab8 00000000
I/DEBUG ( 604): be951abc 00000000
I/DEBUG ( 604): be951ac0 00000000
I/DEBUG ( 604): be951ac4 00000000
I/DEBUG ( 604): be951ac8 00000000
I/DEBUG ( 604): be951acc 00000000
I/DEBUG ( 604): be951ad0 00000000
I/DEBUG ( 604): be951ad4 00000000
I/DEBUG ( 604): be951ad8 ab753a98 /system/lib/libaudio.so
I/DEBUG ( 604): be951adc ab715c58 /system/lib/libaudio.so
I/DEBUG ( 604): be951ae0 ab753090 /system/lib/libaudio.so
I/DEBUG ( 604): be951ae4 ab753ab8 /system/lib/libaudio.so
I/DEBUG ( 604): be951ae8 ab753ab0 /system/lib/libaudio.so
I/DEBUG ( 604): be951aec ab753aa8 /system/lib/libaudio.so
I/DEBUG ( 604): be951af0 ab753080 /system/lib/libaudio.so
I/DEBUG ( 604): be951af4 be951a98 [stack]
I/DEBUG ( 604): be951af8 0000ac78 [heap]
I/DEBUG ( 604): be951afc 0000ac78 [heap]
I/DEBUG ( 604): be951b00 00000000
I/DEBUG ( 604): be951b04 0000ac78 [heap]
I/DEBUG ( 604): be951b08 000000dc
I/DEBUG ( 604): be951b0c 6391e232
I/DEBUG ( 604): be951b10 00000000
I/DEBUG ( 604): be951b14 0000ac78 [heap]
I/DEBUG ( 604): be951b18 0000ac50 [heap]
I/DEBUG ( 604): be951b1c 0000ab30 [heap]
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
I/DEBUG ( 604): be951b20 0000abe8 [heap]
I/DEBUG ( 604): be951b24 00000000
I/DEBUG ( 604): be951b28 00000000
I/DEBUG ( 604): be951b2c 00000000
I/DEBUG ( 604): be951b30 00000000
I/DEBUG ( 604): be951b34 be951b40 [stack]
I/DEBUG ( 604): be951b38 ab716048 /system/lib/libaudio.so
I/DEBUG ( 604): be951b3c ab715c04 /system/lib/libaudio.so
W/AudioSystem( 646): AudioFlinger not published, waiting...
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
I/ ( 702): ServiceManager: 0xaab8
E/AudioHardwareALSA( 702): Unable to attach mixer to device AndroidPlayback: No such file or directory
E/AudioHardwareALSA( 702): Unable to attach mixer to device default: No such file or directory
E/AudioHardwareALSA( 702): Unable to attach mixer to device AndroidRecord: No such file or directory
E/AudioHardwareALSA( 702): Unable to attach mixer to device default: No such file or directory
I/DEBUG ( 604): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
I/DEBUG ( 604): Build fingerprint: 'nokia/nit/nit/:1.0/TC3/eng.solca.20081212.004149:eng/test-keys'
I/DEBUG ( 604): pid: 702, tid: 702 >>> /system/bin/mediaserver <<<
I/DEBUG ( 604): signal 11 (SIGSEGV), fault addr 00000010
I/DEBUG ( 604): r0 00000000 r1 ab749e8c r2 0000ac78 r3 00000000
I/DEBUG ( 604): r4 0000ac78 r5 ab753080 r6 ab753be4 r7 00000000
I/DEBUG ( 604): r8 0000ac78 r9 00000000 10 00000000 fp beb79b3c
I/DEBUG ( 604): ip 00000018 sp beb79a98 lr ab715d30 pc ab722ff8 cpsr 00000010
I/DEBUG ( 604): #00 pc ab722ff8 /system/lib/libaudio.so
I/DEBUG ( 604): #01 pc ab715d2c /system/lib/libaudio.so
I/DEBUG ( 604): #02 pc ab716044 /system/lib/libaudio.so
I/DEBUG ( 604): #03 pc ab713c8c /system/lib/libaudio.so
I/DEBUG ( 604): #04 pc ab0116be /system/lib/libaudioflinger.so
I/DEBUG ( 604): #05 pc ab011828 /system/lib/libaudioflinger.so
I/DEBUG ( 604): #06 pc 0000875c /system/bin/mediaserver
I/DEBUG ( 604): #07 pc afe1e0aa /system/lib/libc.so
I/DEBUG ( 604): #08 pc afe0b09c /system/lib/libc.so
I/DEBUG ( 604): #09 pc b0000d70 /system/bin/linker
I/DEBUG ( 604): stack:
I/DEBUG ( 604): beb79a58 00000013
I/DEBUG ( 604): beb79a5c afe20821 /system/lib/libc.so
I/DEBUG ( 604): beb79a60 ab749e88 /system/lib/libaudio.so
I/DEBUG ( 604): beb79a64 0000ad79 [heap]
I/DEBUG ( 604): beb79a68 00000000
I/DEBUG ( 604): beb79a6c 0000ac78 [heap]
I/DEBUG ( 604): beb79a70 00000000
I/DEBUG ( 604): beb79a74 00000000
I/DEBUG ( 604): beb79a78 beb79b3c [stack]
I/DEBUG ( 604): beb79a7c 0000ad79 [heap]
I/DEBUG ( 604): beb79a80 00000003
I/DEBUG ( 604): beb79a84 afb05ad7 /system/lib/libcutils.so
I/DEBUG ( 604): beb79a88 0000ac78 [heap]
I/DEBUG ( 604): beb79a8c ab753080 /system/lib/libaudio.so
I/DEBUG ( 604): beb79a90 df002777
I/DEBUG ( 604): beb79a94 e3a070ad
I/DEBUG ( 604): #01 beb79a98 00000000
I/DEBUG ( 604): beb79a9c 00000000
I/DEBUG ( 604): beb79aa0 00000000
I/DEBUG ( 604): beb79aa4 00000000
I/DEBUG ( 604): beb79aa8 00000000
I/DEBUG ( 604): beb79aac 00000000
I/DEBUG ( 604): beb79ab0 00000000
I/DEBUG ( 604): beb79ab4 00000000
I/DEBUG ( 604): beb79ab8 00000000
I/DEBUG ( 604): beb79abc 00000000
I/DEBUG ( 604): beb79ac0 00000000
I/DEBUG ( 604): beb79ac4 00000000
I/DEBUG ( 604): beb79ac8 00000000
I/DEBUG ( 604): beb79acc 00000000
I/DEBUG ( 604): beb79ad0 00000000
I/DEBUG ( 604): beb79ad4 00000000
I/DEBUG ( 604): beb79ad8 ab753a98 /system/lib/libaudio.so
I/DEBUG ( 604): beb79adc ab715c58 /system/lib/libaudio.so
I/DEBUG ( 604): beb79ae0 ab753090 /system/lib/libaudio.so
I/DEBUG ( 604): beb79ae4 ab753ab8 /system/lib/libaudio.so
I/DEBUG ( 604): beb79ae8 ab753ab0 /system/lib/libaudio.so
I/DEBUG ( 604): beb79aec ab753aa8 /system/lib/libaudio.so
I/DEBUG ( 604): beb79af0 ab753080 /system/lib/libaudio.so
I/DEBUG ( 604): beb79af4 beb79a98 [stack]
I/DEBUG ( 604): beb79af8 0000ac78 [heap]
I/DEBUG ( 604): beb79afc 0000ac78 [heap]
I/DEBUG ( 604): beb79b00 00000000
I/DEBUG ( 604): beb79b04 0000ac78 [heap]
I/DEBUG ( 604): beb79b08 000000dc
I/DEBUG ( 604): beb79b0c 373468b7
I/DEBUG ( 604): beb79b10 00000000
I/DEBUG ( 604): beb79b14 0000ac78 [heap]
I/DEBUG ( 604): beb79b18 0000ac50 [heap]
I/DEBUG ( 604): beb79b1c 0000ab30 [heap]
I/DEBUG ( 604): beb79b20 0000abe8 [heap]
I/DEBUG ( 604): beb79b24 00000000
I/DEBUG ( 604): beb79b28 00000000
I/DEBUG ( 604): beb79b2c 00000000
I/DEBUG ( 604): beb79b30 00000000
I/DEBUG ( 604): beb79b34 beb79b40 [stack]
I/DEBUG ( 604): beb79b38 ab716048 /system/lib/libaudio.so
I/DEBUG ( 604): beb79b3c ab715c04 /system/lib/libaudio.so
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
W/AudioSystem( 646): AudioFlinger not published, waiting...
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
I/ServiceManager( 646): Waiting for sevice media.audio_flinger...
|
|
2008-12-13
, 04:24
|
|
Posts: 253 |
Thanked: 104 times |
Joined on Aug 2008
@ Midwest, USA
|
#100
|
Woah....this does take a while to load up.
Could you put a note on your NITdroid page that external cards must be removed. I couldn't figure out why mine didn't work until I took out the card and then it was fine...Thanks!
Could you put a note on your NITdroid page that external cards must be removed. I couldn't figure out why mine didn't work until I took out the card and then it was fine...Thanks!
| The Following User Says Thank You to neatojones For This Useful Post: | ||
 |
| Tags |
| android, nitdroid |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
|
All times are GMT. The time now is 07:53.