facing same prob...but another weird prob..healtheck shows 100% battery when full battery charge but batlevel shoows 96%....wat to do..this tweak is not wrking for most n900 so karam,, has evry1 gota hardware problem?

I'm experiencing the same I think. I've set my CPU speed to 250/805, SmartReflex enabled. However, I use this script, PowerKernel,Swappolube... so maybe this script is not the only one to blame :-). Anyway, very satisfied with my new n900.

Hi,
i got the reboot loop problem with the ''ideal'' settings.
And same as upside, my n900 works well, but the battery is empty very fast. Even at 750mhz.

@locolyric
you are doing fine
the patch is applied

@trisha02 and everyone else
looks like what ironm8 said is true

when the device is in standby it doesn't use the battery at all
but when using it it starts to drain the battery
i have noticed that yesterday when i went with my family to a boring place
so i used my N900
i have noticed each 10minutes of webos games takes up 5% of the battery

but if you left the device to standby again
you will notice that the battery increases from ex: 80% to 85% automaticly
so this is really confusing
will do some more tests and try to solve the problem and reply back

@turbovomit

ideal profile doesn't work on all N900s

change to default profile
but edit it and apply vdd1 and vdd2 and change powersave_bias to 20 NOTE : STILL TESTING STAGE

thnx a lot karam..me loves you

im curious the way powersave bios works wouldnt it be the same as just underclocking 20 percent off the max cpu speed u have set
example if overclocked to 1000mhz then powersave_bios at 20 will tell the cpu to use 800mhz
im wondering if it will use a little more battry with the phone haveing to calculate this rather than just setting it to a base lowerstock speed

hey karam are u working on new battery tweaks? if u r then can u make it more common? sdo that it can work on all n900s? because your ideal n default profiles are not working great for me.

same here.it doesnt work on any of the N900.i am still hopeful.lets c what karam has got for us

powersave_bios=20 does not work for me. drain battery a lot. back to 0.
now usage time extended.

current configuration
min freq 250
max freq 700
smartreflex vdd1 & vdd2 = 1
ignore nice load=1
upthreshold=90
sampling rate=300000
not using CSSU but portrait hildon-desktop

anyway thanks for your patch and your hard work.

i've been messing up with some values
up threshold
and the voltages

but messing with up threshold causes less performance
also other things

will do some more tests and reply back
but can some one test something for me:

change powesave_bias to 0
and test if you get a better battery life
i expect you get a shorter standby time
but a longer time of continues usage