Notices

Originally Posted by MINKIN2

Hi Nokia5700

I found this problem too some months ago but managed to get through them by only making gentle gestures with the stylus.

IIRC, when you are moving the dots around the circles, if you hit the edges of the rings then the dots will jump to the side. If you move them in a very slow and precise motion, then you can complete the hacking tasks ok (with practice)

Hope that helps

Originally Posted by govprog

Tiger woods working.
Game movies are now working.(Except in some games like NFSUC.It's movie is not working for me.I doubt it's the in game movie problem.Because in game movies like asphalt are working for me.)
Crusade of destiny scales properly now,but still not working.
Crispy screen problem is not gone.Perhaps it's one of the scaling issues too.

Redownload libsdlpre.so

Code:

members.cox.net/jflatt/libsdlpre.so

Originally Posted by jflatt

I've got a couple updates. First off, I got some scaling issues resolved, which should mean Tiger Woods 09 is fully working, and Speed Forge scales the game properly now. Also, I got Sparkle running, but not sure if it's responding to input or not. Crusade of Destiny should scale properly, I think it didn't before. Which leads me to...
Added back the

Code:

screen_width
screen_height
screen_rotation

settings to per-game gconf configuration. This is only for those who want their aspect ratio perfect, or to re-rotate the one or two quirky games. If the game needs these settings, then we need to fix them still.

Also, I've added a colorkey to get cinematics showing. The colorkey is set for black. If you look at your desktop while a cinematic is playing, you'll notice everything black is now replaced with a movie. I think a better workaround is to pick any other color (green, magenta) for the colorkey and set the sdl window to that color.

Then there's also joystick support. You can already use the default sixad button mappings, but we can do real SDL support if you remove the

Code:

/usr/share/hal/fdi/policy/20thirdparty/20-x11-sony-sixaxis.fdi

I've only tested so far with the SixAxis. I've got some Wii remotes, I'll work on them next. These are the gconf keys

Code:

joy_0_key
joy_0_mouse
joy_0_x
joy_0_y

Where the 0 button code can replaced with any of these

Code:

L1 10
L2 8
R1 11
R2 9
Up 4
Right 5
Down 6
Left 7
Select 0
Start 3
PS 16
Triangle 12
Circle 13
X 14
Square 15
Left Button 1
Right Button 2

If you want to get crazy, run Asphalt5, and then move the SixAxis around. Accelerometer steering! Just be sure that enable_dpad is not on.

If you do have enable_dpad on, it will allow you to use the axis on the controller too. These are the gconf keys

Code:

axis_0_axis
axis_0_mouse
axis_0_type
axis_0_center
axis_0_min
axis_0_max

Where the 0 can replaced by any of these

Code:

L1 14
L2 12
R1 15
R2 13
Up 8
Right 9
Down 10
Left 11
Triangle 16
Circle 17
X 18
Square 19
Left Stick X 0
Left Stick Y 1
Right Stick X 2
Right Stick Y 3
X 5
Y 4
Z 6

I have mapped up some preliminary dpad controls to axis 0 and 1. I need to rework it to allow for different numbers and types of movement, so don't complain about it just yet. If you want to map the dpad, here's an example for nova (type 0 is x-axis, type 1 is y-axis)

Code:

gconftool-2 --set --type int /apps/preenv/nova/enable_dpad 1
gconftool-2 --set --type int /apps/preenv/nova/axis_0_axis 0
gconftool-2 --set --type int /apps/preenv/nova/axis_0_type 0
gconftool-2 --set --type int /apps/preenv/nova/axis_0_mouse 2
gconftool-2 --set --type int /apps/preenv/nova/axis_0_center 119
gconftool-2 --set --type int /apps/preenv/nova/axis_0_min 20
gconftool-2 --set --type int /apps/preenv/nova/axis_0_max 222
gconftool-2 --set --type int /apps/preenv/nova/axis_1_axis 1
gconftool-2 --set --type int /apps/preenv/nova/axis_1_type 1
gconftool-2 --set --type int /apps/preenv/nova/axis_1_mouse 2
gconftool-2 --set --type int /apps/preenv/nova/axis_1_center 376
gconftool-2 --set --type int /apps/preenv/nova/axis_1_max 466
gconftool-2 --set --type int /apps/preenv/nova/axis_1_min 280

Originally Posted by govprog

It won't fix the galcon's "Bad touch rotation" itself yet(I mean libsdlpre.so can't fix the galcon itself yet without any modifications).As jflatt said before they are some games that are willing to automatically fit the screen even after the scaling is set to 0. And this game is formally requesting to change its rotation to 3 but this request is useless because this game is already creating a landscape surface.For a try out, you can destroy your changes by typing

Code:

gconftool-2 --recursive-unset /apps/preenv/galcon

And you will see it won't work again.
To get it working again you can type

Code:

gconftool-2 --set --type int /apps/preenv/galcon/screen_rotation 0

EDIT:And for the speed forge:I don't know. Try experimenting. If a real rotation happens during your experiment,so it won't.(My above suggestion was for this:If you are always facing the same result with every number in the rotation(0,1,2,3,4,...) so you are facing the same problem.Otherwise,it is going to be another scaling issue.)

Originally Posted by gm90_blackmamba

hi guys, i have a problem with assassins. I use mido,s libsdlpre.so and assassins.sh but it is still unplayable because i can't jump with the keybord. can someone explain how to use the keyboard mapping?

thank you very much

p.s. i have italian kayboard.

Originally Posted by divij

did u follow all the instructions?
did u copy the patch in lib?
if yes you will be able to jump with the up arrow key
but you would have to use the screen to move altair
p.s. make sure you have latest version of preenv(ie 0.1.4)