Page 175 of 536 « First 165173174 175 176177185 Last »
Poll: Do you think its possible to overclock the N900?!
Poll Options
Do you think its possible to overclock the N900?!

Reply
Thread Tools
Rushmore is offline Rushmore
2010-04-08 , 13:00
Posts: 1,255 | Thanked: 393 times | Joined on Oct 2009 @ US
#1741
Originally Posted by UNderworld View Post
mine was good at 1ghz...... put 1.1ghz and it freezes and switches off.....
im better off leaving it on 900/500dsp for a few days...
Same thing on Droid- 1.1ghz appears to be the ceiling of the 3430.

IMO, 800mhz is the best compromise, since significantly better performance than 600mhz and much less of a chance for device failure. Not to mention the 1320mah battery is challenged enough already
 

The Following User Says Thank You to Rushmore For This Useful Post:
maykon-de-angra is offline maykon-de-angra
2010-04-08 , 13:03
Posts: 2 | Thanked: 10 times | Joined on Apr 2010
#1742
Titan Hello!
I would like to thank the excellent work of you here in the Community! congratulations for the dedication!

My problem is a Next. I wanted a Kernel From 950mhz-500DSP And 1000Mhz-500DSP to test, equal to that I picked up here http://www.farahfa.com/n900-custom-k...rnelslehto-oc/
Problem is that Ali has no Major 500Mhz 930mhz.
Can you help?
I want a kernel that I Place by Flash and Stay permanent
I do not want to configure the X-editor.
You could post so I can download?
http://www.saunalahti.fi/crailt/ of these I can not use the link opens with various codes and I can not save.

Thanks! congratulations to all! Thanks!
 
nokian-series is offline nokian-series
2010-04-08 , 13:05
Posts: 169 | Thanked: 41 times | Joined on Apr 2010 @ Portugal
#1743
Originally Posted by titan View Post
as I wrote, only for kernels that have a 625 or 600 level a phone call will
reset the limit to 600MHz.
only this specific kernel by letho and my kernel are affected.
but qwerty12 seems to have found a workaround
http://talk.maemo.org/showpost.php?p...postcount=1722
So, what would be the correct to happen when making a phone call?
Confused..sorry.

I've 900 Mhz lehto kernel, stock DSP.

It's bad what happens, not bad.. can anyone explain.

Thanks.
 
baron von bubba is offline baron von bubba
2010-04-08 , 13:20
Posts: 255 | Thanked: 109 times | Joined on Dec 2009
#1744
Originally Posted by nokian-series View Post
So, what would be the correct to happen when making a phone call?
Confused..sorry.

I've 900 Mhz lehto kernel, stock DSP.

It's bad what happens, not bad.. can anyone explain.

Thanks.
from what i can gather titans kernel, will reset after a phone call, back to 600 mhz, (so will need to be re-enabled after callls) it will also be maxed out on the mhz while in a call.

lethos kernel doesn't do this.

well, this is how i understand it, obviously there is an awful lot of infos in this thread and hard to get head round some of it! ;0)
 
BlackDiamond is offline BlackDiamond
2010-04-08 , 13:25
Posts: 61 | Thanked: 21 times | Joined on Jan 2010
#1745
No, Letho's kernels that don't have any frequency >= 600 available except the maximum one WILL max out during phone call (btw it seems to scale down during call)
Titan's one will stay at 600.
 

The Following 2 Users Say Thank You to BlackDiamond For This Useful Post:
baron von bubba is offline baron von bubba
2010-04-08 , 13:30
Posts: 255 | Thanked: 109 times | Joined on Dec 2009
#1746
ok, so which one is considered the best?
pros and cons of each?
 
legendsohai is offline legendsohai
2010-04-08 , 14:16
Posts: 32 | Thanked: 4 times | Joined on Feb 2010 @ Malaysia
#1747
hi guys, is there any command used to change clock speed of dsp in titan's kernel?
 

The Following User Says Thank You to legendsohai For This Useful Post:
BlackDiamond is offline BlackDiamond
2010-04-08 , 14:42
Posts: 61 | Thanked: 21 times | Joined on Jan 2010
#1748
there no command to change dsp clock speed,
In titan's kernel it is at stock speed when the CPU clock is <=800Mhz and overclocked to 500Mhz when cpu clock is above 800Mhz.
 
nokian-series is offline nokian-series
2010-04-08 , 14:49
Posts: 169 | Thanked: 41 times | Joined on Apr 2010 @ Portugal
#1749
Originally Posted by baron von bubba View Post
ok, so which one is considered the best?
pros and cons of each?
Yes..little confusing..anyone explain..
I'm using 900 MHz lehto kerner, now 4 days, and..all good, all lovely .. but if i can improve it..
 
gryedouge is offline gryedouge
2010-04-08 , 14:53
Posts: 249 | Thanked: 167 times | Joined on Mar 2010 @ International
#1750
This leads to another question, OC platform/device stability...

To date, what is the average length of time that overclockers have been running their '900s at the new settings?
 
Reply
Page 175 of 536 « First 165173174 175 176177185 Last »

Tags
cooking on gas, cortex-a8, faster, first to fry it wins!, hardware, its smoking, n900, need for speed, need for weed, nos, omap, omap3, omap3430, overclock, overclocking, soc, system-on-a-chip, the dogs, this thread got good!, vtec just kicked in y0!, warranty will be void, whooplah, zoom zoom

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 18:31.

Contact Us - Home - Archive - Top