The Following 6 Users Say Thank You to meloferz For This Useful Post: | ||
![]() |
2017-10-14
, 19:55
|
|
Posts: 7,075 |
Thanked: 9,073 times |
Joined on Oct 2009
@ Moon! It's not the East or the West side... it's the Dark Side
|
#1752
|
Just installed Sailfish X and it was smooth. No problems when i used internet and email. Also installed whatsapp, skype and linphone from Yalp / Play store. Could not try whatsapp since I was too lazy to get my sim card from downstairs but probably will play more tomorrow. Will definately be my daily driver and cannot understand why not since all seems to work.
![]() |
2017-10-14
, 22:20
|
Posts: 248 |
Thanked: 1,142 times |
Joined on Dec 2014
@ Earth
|
#1753
|
Entering "[root@Sailfish nemo]# mount /dev/mmcblk1p1 /mnt/sdcard/" brings:
mount: mount point /mnt/sdcard/ does not exist
Entering "blkid /dev/mmcblk1" => Nothing happens:
Entering "[root@Sailfish nemo]# lsblk /dev/mmcblk1" brings:
lsblk: /dev/mmcblk1: not a block device
Oct 15 00:02:33 Sailfish kernel: mmc1: slot status change detected (0 -> 1), GPIO_ACTIVE_HIGH Oct 15 00:02:49 Sailfish kernel: mmc1: new high speed SDHC card at address b3a4 Oct 15 00:02:49 Sailfish kernel: mmcblk1: mmc1:b3a4 SE04G 3.63 GiB Oct 15 00:02:49 Sailfish kernel: mmcblk1: p1 Oct 15 00:02:49 Sailfish kernel: mmcblk1: error during r/w command, stop response 0x80000b00 Oct 15 00:02:49 Sailfish kernel: mmcblk1: retrying using single block read Oct 15 00:02:49 Sailfish mount-sd[25033]: Called to add mmcblk1 Oct 15 00:02:49 Sailfish mount-sd[25051]: Called to add mmcblk1p1 Oct 15 00:02:49 Sailfish mount-sd[25071]: Finished adding /dev/mmcblk1p1 of type vfat at /media/sdcard/3066-E1A3 Oct 15 00:02:49 Sailfish kernel: mmcblk1: error during r/w command, stop response 0x80000b00 Oct 15 00:02:49 Sailfish kernel: mmcblk1: retrying using single block read Oct 15 00:02:49 Sailfish mount-sd.sh[25021]: mount: /dev/mmcblk1 is already mounted or /media/sdcard/02544d534530344707b72bb5a100f200-mmcblk1p1 busy Oct 15 00:02:49 Sailfish mount-sd[25096]: Finished adding /dev/mmcblk1 of type vfat at /media/sdcard/02544d534530344707b72bb5a100f200-mmcblk1p1
# lsblk /dev/mmcblk1 NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk1 179:64 0 3.7G 0 disk `-mmcblk1p1 179:65 0 3.6G 0 part /opt/alien/media/sdcard/3066-E1A3 # fdisk -l /dev/mmcblk1 Disk /dev/mmcblk1: 3.7 GiB, 3904897024 bytes, 7626752 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00000000 Device Boot Start End Sectors Size Id Type /dev/mmcblk1p1 8192 7626751 7618560 3.6G b W95 FAT32 # mount | grep mmcblk1 /dev/mmcblk1p1 on /media/sdcard/3066-E1A3 type vfat (rw,nosuid,nodev,noexec,noatime,dirsync,uid=100000,gid=100000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,utf8,flush,errors=remount-ro,discard) /dev/mmcblk1p1 on /opt/alien/media/sdcard/3066-E1A3 type vfat (rw,nosuid,nodev,noexec,noatime,dirsync,uid=100000,gid=100000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,utf8,flush,errors=remount-ro,discard)
The Following 3 Users Say Thank You to DrYak For This Useful Post: | ||
![]() |
2017-10-14
, 22:30
|
Posts: 248 |
Thanked: 1,142 times |
Joined on Dec 2014
@ Earth
|
#1754
|
Thanks again DrYak for the idea about UDF. There seems to be little discusion about using UDF and Sailfish, but so far its working well for me.
For those interested, i ran a simple format command with admin rights on Windows 10 cmd prompt (where my microsd was drive F: ) :
format F: /fs:UDF
https://technet.microsoft.com/en-us/...(v=ws.11).aspx
![]() |
2017-10-14
, 22:35
|
Posts: 248 |
Thanked: 1,142 times |
Joined on Dec 2014
@ Earth
|
#1755
|
Hi all, I'm happy that I've found a way to not format my SD card as it is in exfat format, i found this information to make it reconize by Sailfish and automount after reboot.
Install this first https://openrepos.net/content/bloodyfoxy/exfat-utils
The Following 5 Users Say Thank You to DrYak For This Useful Post: | ||
![]() |
2017-10-15
, 00:00
|
Posts: 93 |
Thanked: 358 times |
Joined on Jul 2016
@ Paraguay
|
#1756
|
Yeah, used to play around with this on my Jolla 1.
I've also compiled similar FUSE-based support for NTRFS (ntrfs-3g) if you need that too (for a USB key over USB OTG ?)
Warning for any USAmerican that comes in a future where Sailfish X is extended outside of Europe :
The above pieces of code (exFAT FUSE drivers) are completely illegal in your country, because of stupid software patent laws in your country.
Sorry for you.
Talk to your representatives.
The Following 3 Users Say Thank You to meloferz For This Useful Post: | ||
![]() |
2017-10-15
, 00:04
|
Posts: 300 |
Thanked: 962 times |
Joined on Jun 2010
@ USA
|
#1757
|
So.. I can't travel to US with my Sailfish X because I use a piece of software patented there that I installed illegally, ok... I didn't wanted to go anyway
Enviado desde mi Xperia X corriendo Sailfish OS
The Following 3 Users Say Thank You to deprecated For This Useful Post: | ||
![]() |
2017-10-15
, 05:26
|
Posts: 5 |
Thanked: 48 times |
Joined on Oct 2016
|
#1758
|
Did some photos at house with just lamps, so the brightness of the scene is not excellent. It seems to me that the autofocus is not working well. At a first glance the photos look great compared to Jolla C due to much better color reproduction.
But zooming into the pictures reveals them to be quite blurry, as if the focus was a bit off. In fact when tapping to get focus, to plain eye it seems there's a more focused version when it's calibrating, but the camera chooses less optimal version. I also compared with another Android phone which took much sharper picture. Jolla C also took sharper picture, but it was grainier and as mentioned before the colors were nowhere near as good as on Sony X.
Anyone else have similar experiences? Or other experiences? I still need to test on daylight.
![]() |
2017-10-15
, 06:04
|
|
Posts: 411 |
Thanked: 1,105 times |
Joined on Jan 2010
@ Europe
|
#1759
|
Camera picture quality is far away from original Sony camera app. Color quality is good but pictures are mostly blurred. Quality like Jolla C/Aquafish at the moment. On my Turing Phone pictures are more sharper but the colors were nowhere near as good as on SailfishX.
![]() |
2017-10-15
, 06:58
|
|
Posts: 7,075 |
Thanked: 9,073 times |
Joined on Oct 2009
@ Moon! It's not the East or the West side... it's the Dark Side
|
#1760
|
![]() |
Tags |
sailfish os, sony xperia x |
Thread Tools | |
|
Install this first https://openrepos.net/content/bloodyfoxy/exfat-utils
An then this
https://openrepos.net/content/bloodyfoxy/fuse-exfat
Then
Make exFAT filesystem on your SD card: