Page 197 of 536 « First 187195196 197 198199207 Last »
Poll: Do you think its possible to overclock the N900?!
Poll Options
Do you think its possible to overclock the N900?!

Reply
Thread Tools
egoshin is offline egoshin
2010-04-09 , 19:07
Posts: 992 | Thanked: 995 times | Joined on Dec 2009 @ California
#1961
Originally Posted by lifenexus View Post
i have it stuck at -40 for a day. i hade a reading. it was first 20 then 40 than after a reboot, it became -40
Of course, after reboot - new life. The only parameters are preserved which are in flash. Temperature value is in kernel and after reboot it is lost and should be collected again.
 

The Following 3 Users Say Thank You to egoshin For This Useful Post:
Lehto is offline Lehto
2010-04-09 , 19:16
Posts: 126 | Thanked: 327 times | Joined on Nov 2009 @ Finland
#1962
Originally Posted by tidusuk123 View Post
Hi guys. I've tried Lehto's ulv 1000mhz kernel. Phone has booted but how do I activate 1000mhz. Conky reports 800mhz. I've tried looking back in the forum but can't figure it out.

Can anyone help? Thanks.
Here.
Code:
sudo gainroot
echo 1000000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
This 1000mhz stays only until a phonecall is made or next reboot, its NOT meant to be used all the time... its left in there if for some really odd reason you require 1000mhz of calculating power.
__________________
My OC kernel collection
 
snakekontrol is offline snakekontrol
2010-04-09 , 19:22
Posts: 39 | Thanked: 10 times | Joined on Nov 2009
#1963
@Letho let me see if I'm getting this right:

IN THEORY you ULV kernel at 800mhz should actually be safer (more battery, more cpu life) than nokia's stock kernel at 600mhz?

I make this assumption based on past statements where they say that the shortlife on the cpu is caused by the increased voltage on the cpu to achieve high frecuencies.

Thanks!!
 
casper27's Avatar
casper27 is offline casper27
2010-04-09 , 19:25
Posts: 844 | Thanked: 521 times | Joined on Jan 2009 @ UK southampton
#1964
Trying the new titan kernel with the under voltage enabled and phone enhancements.
When making a phone call the max level currently at 900 stays the same which is good but the min ie 125 always defaults back to 250.
Any one else using 125 confirm.
 
Lehto is offline Lehto
2010-04-09 , 19:34
Posts: 126 | Thanked: 327 times | Joined on Nov 2009 @ Finland
#1965
Originally Posted by snakekontrol View Post
@Letho let me see if I'm getting this right:

IN THEORY you ULV kernel at 800mhz should actually be safer (more battery, more cpu life) than nokia's stock kernel at 600mhz?

I make this assumption based on past statements where they say that the shortlife on the cpu is caused by the increased voltage on the cpu to achieve high frecuencies.

Thanks!!
In theory yes. After all mine runs with about 1.17volts (estimated) compared to the stock 600mhz's 1.35volts.
__________________
My OC kernel collection
 

The Following User Says Thank You to Lehto For This Useful Post:
instigator is offline instigator
2010-04-09 , 19:37
Posts: 118 | Thanked: 18 times | Joined on Dec 2007 @ Mississauga, ON Canada
#1966
Originally Posted by casper27 View Post
Trying the new titan kernel with the under voltage enabled and phone enhancements.
When making a phone call the max level currently at 900 stays the same which is good but the min ie 125 always defaults back to 250.
Any one else using 125 confirm.
Titan does not have undervoltage enabled yet.
 

The Following 2 Users Say Thank You to instigator For This Useful Post:
AlMehdi is offline AlMehdi
2010-04-09 , 19:56
Posts: 1,751 | Thanked: 844 times | Joined on Feb 2010 @ Sweden
#1967
Damn.. i who hoped it was undervoltaged as it was rock solid.
 
Gusse's Avatar
Gusse is offline Gusse
2010-04-09 , 20:01
Posts: 168 | Thanked: 206 times | Joined on Apr 2010 @ Finland
#1968
Originally Posted by Lehto View Post
In theory yes. After all mine runs with about 1.17volts (estimated) compared to the stock 600mhz's 1.35volts.
Just curious to know how have you verified that which core voltage is still OK. What parameters do you monitor?

I have tested your normal (850MHz) and under voltage (800MHz) kernels with good success. Nice job!

Now testing Titan's latest (850MHz) without any troubles and waiting the low voltage version. Nice job too!

Keep on good work!

Thanks and best regards
-Gusse-
Last edited by Gusse; 2010-04-09 at 20:06.
 
Lehto is offline Lehto
2010-04-09 , 20:07
Posts: 126 | Thanked: 327 times | Joined on Nov 2009 @ Finland
#1969
Originally Posted by Gusse View Post
Just curious to know how have you verified that which core voltage is still OK. What parameters do you monitor?

I have tested your normal (850MHz) and under voltage (800MHz) kernels with good success. Nice job!

Now testing Titan's latest without any troubles and waiting the low voltage version. Nice job too!

Keep on good work!

Thanks and best regards
-Gusse-
30minutes 100% load behind charger. When that clock is stable and doesnt crash, I add one more voltage step and then move to next clock.
__________________
My OC kernel collection
 

The Following 3 Users Say Thank You to Lehto For This Useful Post:
Exact is offline Exact
2010-04-09 , 20:25
Posts: 72 | Thanked: 5 times | Joined on Apr 2010 @ Finland
#1970
Originally Posted by b-man View Post
mirrored at http://b-man.xceleo.org/files/pi_css5-vfp3.tar.bz2
Ok i've downloaded the file to my N900, so how do I actually use this?
 
Reply
Page 197 of 536 « First 187195196 197 198199207 Last »

Tags
cooking on gas, cortex-a8, faster, first to fry it wins!, hardware, its smoking, n900, need for speed, need for weed, nos, omap, omap3, omap3430, overclock, overclocking, soc, system-on-a-chip, the dogs, this thread got good!, vtec just kicked in y0!, warranty will be void, whooplah, zoom zoom

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 16:39.

Contact Us - Home - Archive - Top