Active Topics
-
The N900 is now 15 years old! (9)
to Nokia N900 by Arno_11 - 17 hrs, 40 mins ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 6 days, 6 hrs ago - more...
| The Following 6 Users Say Thank You to AtteK0 For This Useful Post: | ||
|
2010-08-09
, 10:41
|
|
Posts: 33 |
Thanked: 4 times |
Joined on Aug 2010
@ Kiev, UA
|
#12
|
Originally Posted by AtteK0
You`re the hero of the day, my friend! Thanks for this, I began to worry that mine week-old n900 might just go the way of the dodo, if such usb port problem happen to me...
Most of the soldering I did was simply for attaching the port into the device. The pins under the new port were placed on top of the pins of the N900 and then I heated up the pins from above to make them connect and stay put.
All the surfaces needed to be cleaned and brushed that did not have any soldering tin on top of them. The level of skill needed for this task was average: if anyone has soldered something before, he/she should be able to perform this too.
N900 is an expensive device so I can write a more comprehensive guide to how it is done if someone needs to do this too.
Question - won`t it be more, say, practical just to harden the existing/repaired port with some thin metal axis that goes through outer part of the port right to the motherboard? Of course not touching some circuits on the board...
That could make the port be rock-solid..
 |
|
2010-08-09
, 10:55
|
|
Posts: 145 |
Thanked: 170 times |
Joined on Mar 2010
@ Finland
|
#13
|
I actually did solder the port all the way to the board on the right side. It made it rock solid without the need for any wires/structures.
[IMG]
[/IMG]
For additional support I soldered the sides of the port to the metal tabs on the sides of the circuit. I applied some soldering tin before putting the port in position and then kept it steady while it was attached. Some soldering tin was on the port too to ensure it attached both sides.
[IMG]
[/IMG]For additional support I soldered the sides of the port to the metal tabs on the sides of the circuit. I applied some soldering tin before putting the port in position and then kept it steady while it was attached. Some soldering tin was on the port too to ensure it attached both sides.
__________________
Flash 10.1 - "Never gonna give you uuup..."
Flash 10.1 - "Never gonna give you uuup..."
 |
|
2010-08-09
, 11:01
|
|
Posts: 70 |
Thanked: 410 times |
Joined on Sep 2009
@ Fife, Scotland.
|
#14
|
Originally Posted by masloff
There are several problems with this.
You`re the hero of the day, my friend! Thanks for this, I began to worry that mine week-old n900 might just go the way of the dodo, if such usb port problem happen to me...
Question - won`t it be more, say, practical just to harden the existing/repaired port with some thin metal axis that goes through outer part of the port right to the motherboard? Of course not touching some circuits on the board...
That could make the port be rock-solid..
Firstly, it is quite possible to screw your n900 by taking it apart - at least one actual electronic engineer by profession has had it fail due to the LCD cable not working afterwards.
Secondly - the PCB has between six and eight layers - you absolutely cannot see where circuits are. Drilling through it is a really bad idea.
Thirdly - you can get exactly matching USB connectors from digikey.com or mouser.com or ... for a couple of dollars.
Fourthly - if you're not sure it's covered by warranty, ask first before soldering!
|
|
2010-08-09
, 11:05
|
|
Guest |
Posts: n/a |
Thanked: 0 times |
Joined on
|
#15
|
Kudos to you fixing your own problem. It's not the prettiest of fixes, but it's downright beautiful what you've done.
Awesome and thanks for sharing.
Awesome and thanks for sharing.
 |
|
2010-08-09
, 11:10
|
|
Posts: 820 |
Thanked: 436 times |
Joined on May 2010
@ Portsmouth, UK.
|
#16
|
Originally Posted by AtteK0
That's more like it..a true botch job
Thanks for the idea. Now its all better
|
|
2010-08-09
, 11:41
|
|
Posts: 1,729 |
Thanked: 388 times |
Joined on Jan 2010
@ Canada
|
#17
|
i got my n900 last january. i was using it as normal for about 2 weeks.
after reading the big micro usb issue thread (that was not so big back then), i followed a simple way of preventing the micro usb issue.
to prevent the micro usb port issue, file the cables and charger!
if you have a broken micro usb, call nokia and ask for repair/replacement.
if nokia wont, read this thread!
hahaha! it seems like solutions are being provided by the community not only on software but also on hardware.
thank you!
after reading the big micro usb issue thread (that was not so big back then), i followed a simple way of preventing the micro usb issue.
to prevent the micro usb port issue, file the cables and charger!
if you have a broken micro usb, call nokia and ask for repair/replacement.
if nokia wont, read this thread!
hahaha! it seems like solutions are being provided by the community not only on software but also on hardware.
thank you!
__________________
if i did help you, just click "Thanks" on the lower right of my post. thanks!
"The best way to break a Spell is to prevent it from being cast in the first place"
N900: 1000/1150mhz; sampling_rate 15; up_threshold 150000;
if i did help you, just click "Thanks" on the lower right of my post. thanks!
"The best way to break a Spell is to prevent it from being cast in the first place"
N900: 1000/1150mhz; sampling_rate 15; up_threshold 150000;
|
|
2010-08-09
, 12:23
|
|
Posts: 291 |
Thanked: 59 times |
Joined on Mar 2010
@ Manchester, UK
|
#18
|
Originally Posted by gabby131
i did this on day one to all my usb's
file dat connector
__________________
Devices: Nokia N810 WiMax - Nokia N8 PR1.2 + Mods - Rooted Galaxy Europa
RIP: Nokia N900 - ARM Cortex A8 @ 1150mhz - 32GB + 8GB - Maemo 5 PR1.2 + Android 2.2
[22:52] <DJ_Steve> its like ive released somethign useful or something
Devices: Nokia N810 WiMax - Nokia N8 PR1.2 + Mods - Rooted Galaxy Europa
RIP: Nokia N900 - ARM Cortex A8 @ 1150mhz - 32GB + 8GB - Maemo 5 PR1.2 + Android 2.2
[22:52] <DJ_Steve> its like ive released somethign useful or something
 |
|
2010-08-09
, 13:32
|
|
Posts: 2,222 |
Thanked: 12,651 times |
Joined on Mar 2010
@ SOL 3
|
#19
|
no more need for special cable
If I'd been you I would have ordered a micro-AB receptacle at http://www.digikey.com/ or http://de.mouser.com/Home.aspx or your favourite local store and used that one for replacement and maybe used decent amount of 2 component resin glue to harden it. Your fix, though courageous, doesn't really look like it will last for long. Due to the pads not matching the component you got an even more weak solution now. Also I expect problems with the extension board holding the uSD and flashlight LEDs.
Anyway, nice hack - butt ugly like hacks have to be and quite inspired :-D
/jOERG
__________________
Maemo Community Council member [2012-10, 2013-05, 2013-11, 2014-06 terms]
Hildon Foundation Council inaugural member.
MCe.V. foundation member
EX Hildon Foundation approved Maemo Administration Coordinator (stepped down due to bullying 2014-04-05)
aka "techstaff" - the guys who keep your infra running - Devotion to Duty http://xkcd.com/705/
IRC(freenode): DocScrutinizer*
First USB hostmode fanatic, father of H-E-N
Maemo Community Council member [2012-10, 2013-05, 2013-11, 2014-06 terms]
Hildon Foundation Council inaugural member.
MCe.V. foundation member
EX Hildon Foundation approved Maemo Administration Coordinator (stepped down due to bullying 2014-04-05)
aka "techstaff" - the guys who keep your infra running - Devotion to Duty http://xkcd.com/705/
IRC(freenode): DocScrutinizer*
First USB hostmode fanatic, father of H-E-N
|
|
2010-08-09
, 14:07
|
|
Posts: 145 |
Thanked: 170 times |
Joined on Mar 2010
@ Finland
|
#20
|
Originally Posted by joerg_rw
Oh, you meant this one?
You are aware that by now the new cable you use with this 'fix' is the 'special' cable? Mini USB is deprecated since some 2 years, and no new devices will be sold that care about USB sticker on box and have mini USB receptacles. So your 'non-special' mini USB cable is actually an obsolete species, and the 'special' micro-USB is pretty much standard.
If I'd been you I would have ordered a micro-AB receptacle at http://www.digikey.com/ or http://de.mouser.com/Home.aspx or your favourite local store and used that one for replacement and maybe used decent amount of 2 component resin glue to harden it. Your fix, though courageous, doesn't really look like it will last for long. Due to the pads not matching the component you got an even more weak solution now. Also I expect problems with the extension board holding the uSD and flashlight LEDs.
Anyway, nice hack - butt ugly like hacks have to be and quite inspired :-D
/jOERG
Surely the "micro" cables are going to become a lot more common in the future. However I do own only 1 of those and about 5 of the mini-b. Keeping this in mind I considered the risk worth taking.
The repair itself went very well and the attached port is doing it's job like it should. AND I only have to carry one cable from now on if I ever go on a trip.
If I ever consider changing back into the new standard I have probably got rid of the device by then.
__________________
Flash 10.1 - "Never gonna give you uuup..."
Flash 10.1 - "Never gonna give you uuup..."
Last edited by AtteK0; 2010-08-09 at 14:11.
| The Following User Says Thank You to AtteK0 For This Useful Post: | ||
Flash 10.1 - "Never gonna give you uuup..."