Originally Posted by geohsia

Thanks I flashed with the Switzerland PR 1.1 and it went well but it was super unstable. Freezes and things crashing.

Originally Posted by geohsia

Thanks I flashed with the Switzerland PR 1.1 and it went well but it was super unstable. Freezes and things crashing. On the china version it was fine although I didn't have Skype / GMAIL and other services. I'm going to now reflash everything again and also the emmc to see what's going on. Hopefully that resolves the issue. Otherwise this is an expensive pocket warmer.

Originally Posted by all00

it was not completely flashed because of losing "cmt-mcusw". after reflashing n9 with the switzerland pr1.1, you must do this:
flasher -F DFL61_HARMATTAN_20.2011.40-4_PR_LEGACY_003-OEM1-958_ARM.bin --flash-only cmt -f

Originally Posted by youmeego

why? do all n9 hardware not look the same?

Originally Posted by all00

it was not completely flashed because of losing "cmt-mcusw". after reflashing n9 with the switzerland pr1.1, you must do this:
flasher -F DFL61_HARMATTAN_20.2011.40-4_PR_LEGACY_003-OEM1-958_ARM.bin --flash-only cmt -f

Originally Posted by geohsia

:-(

Here's the latest error:

Code:

C:\Program Files\Nokia\Flasher>flasher  -F DFL61_HARMATTAN_20.2011.40-4_PR_LEGAC
Y_009-OEM1-958_ARM.bin --flash-only cmt -f
flasher 3.12.1 (Oct  6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1601
NOLO version 2.1.5
Version of 'sw-release': DFL61_HARMATTAN_20.2011.40-4_PR_009
Sending ape-algo image (7032 kB)...
100% (7032 of 7032 kB, avg. 16129 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.6.3
Found product RM-696 rev. 1601
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_20.2011.40-4_PR_009
Image cert-sw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image mmc skipped
Image tar skipped
Image config skipped

Battery level 15 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[x] cmt-algo     [finished   100 %     789 /     789 kB      NA     ]
[_] cmt-mcusw    [finishing    0 %    6050 /    6050 kB    3399 kB/s]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[x] cmt-algo     [finished   100 %     789 /     789 kB      NA     ]
[f] cmt-mcusw    [finishing    0 %    6050 /    6050 kB    3399 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
MTC_NOS_READY not received
MTC_NOS_READY not received
MTC_NOS_READY not received
CMT RFS failed
[Pipe   2] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

C:\Program Files\Nokia\Flasher>

Originally Posted by all00

hi, this step isn't "...009....bin"

you should download the china firm with legacy 003

Originally Posted by geohsia

Really. I'm not sure how to do that. Will I be able to Add the Skyp, FB and Twitter apps? That would be great if I could do that.

Can you point me to documents that might show how I can do that? Thx.

Originally Posted by eltoffer

are you sure??? no man he has P.R 1.1 but he cant update cause he is trying to load a lower pr i mean he has pr003 and is trying to flash with pr001, he just need to choose a firm with higher