Reply
Thread Tools
GeneralAntilles's Avatar
Posts: 5,478 | Thanked: 5,222 times | Joined on Jan 2006 @ St. Petersburg, FL
#201
Originally Posted by sachin007 View Post
Does the code support mutli-touch or is it something which cannot be deduced from the code?
As I've said before, it will be a resistive touchscreen.
 
fragos's Avatar
Posts: 900 | Thanked: 273 times | Joined on Aug 2008 @ Fresno CA USA
#202
Originally Posted by Frank Banul View Post
I respectfully disagree, the light sensor allowed me to get rid of the brightness adjustment in my status bar because I never need to use it anymore. The sensor placement isn't optimal as I do sometimes cover it inadvertently but I really do appreciate the sensor.
Ditto here. As someone that uses their tablet both inside and out this keeps the tablet readable. I also wonder if this feature contributes to longer battery life.
__________________
George Fragos
Internet Coach & Writer
Maemo Mapper HowTo
Personal Blog -- 3 Joe's Blog


N810 -- 5.2010.33-1
 
TheRealBubba's Avatar
Posts: 130 | Thanked: 74 times | Joined on Jul 2007 @ Canada
#203
Originally Posted by GeneralAntilles View Post
As I've said before, it will be a resistive touchscreen.
O.T. question: So I read the wikipedia page on resistive / capacative touch screens. I'm wondering what my thinkpad X61 tablet is? The touchscreen is called MultiView/MultiTouch, but only works with the special stylus, not with finger/other object touch. Just curious...
 
GeneralAntilles's Avatar
Posts: 5,478 | Thanked: 5,222 times | Joined on Jan 2006 @ St. Petersburg, FL
#204
Originally Posted by TheRealBubba View Post
O.T. question: So I read the wikipedia page on resistive / capacative touch screens. I'm wondering what my thinkpad X61 tablet is? The touchscreen is called MultiView/MultiTouch, but only works with the special stylus, not with finger/other object touch. Just curious...
Same tech the Wacom tablets use. Sometimes they combine that with a resistive panel as well.
 
qole's Avatar
Moderator | Posts: 7,109 | Thanked: 8,820 times | Joined on Oct 2007 @ Vancouver, BC, Canada
#205
Originally Posted by fanoush View Post
Here is small update...
- internal slot is indeed eMMC
I had to google for eMMC, and then I had to discard some of the first hits. I finally got some good info.

So the "internal slot" is going to be not a "slot" at all? This sounds like the RX-51 will have the same configuration as the N810... So that very likely means no full size SD card slot either, only a mini or a micro.

Hey, SDHC cards are not dead, you know! Most of the current generation HD camcorders are using them, so I see a few more years of these cards being available...
__________________
qole.org --- twitter --- Easy Debian wiki page
Please don't send me a private message, post to the appropriate thread.
Thank you all for your donations!
 
GeneralAntilles's Avatar
Posts: 5,478 | Thanked: 5,222 times | Joined on Jan 2006 @ St. Petersburg, FL
#206
Originally Posted by qole View Post
So the "internal slot" is going to be not a "slot" at all? This sounds like the RX-51 will have the same configuration as the N810... So that very likely means no full size SD card slot either, only a mini or a micro.
Not exactly surprising. It matters a lot less, though, because I suspect the built-in card will be in the ballpark of 32GB.
 
Benson's Avatar
Posts: 4,930 | Thanked: 2,272 times | Joined on Oct 2007
#207
Originally Posted by qole View Post
I had to google for eMMC, and then I had to discard some of the first hits. I finally got some good info.

So the "internal slot" is going to be not a "slot" at all? This sounds like the RX-51 will have the same configuration as the N810... So that very likely means no full size SD card slot either, only a mini or a micro.
As I see it, regular vs. mini is a totally separate issue; it's quite possible that the backlash has been noisy enough to encourage a single full-SD slot. But if I had to put money down, I'd go with microSD. Nobody uses miniSD, so I'd hope they get rid of it, and micro is preferable if they're trying to keep the size down. This time, they're adding substantial hardware (HD camera), so even without another whole tablet shrink (like the N800->N810), they could need that space. (Personally, I'd rather they go back to N800 size, put the d-pad on the face, and at least one full-SD. And maybe a second d-pad (or analog nub) on the right side...)
 
Posts: 1,513 | Thanked: 2,248 times | Joined on Mar 2006 @ US
#208
Originally Posted by Benson View Post
As I see it, regular vs. mini is a totally separate issue; it's quite possible that the backlash has been noisy enough to encourage a single full-SD slot. But if I had to put money down, I'd go with microSD. Nobody uses miniSD, so I'd hope they get rid of it, and micro is preferable if they're trying to keep the size down. This time, they're adding substantial hardware (HD camera), so even without another whole tablet shrink (like the N800->N810), they could need that space. (Personally, I'd rather they go back to N800 size, put the d-pad on the face, and at least one full-SD. And maybe a second d-pad (or analog nub) on the right side...)
The thing I hate about micro-SD is that you need the adapter to input it directly into most all readers and printers.
 
davadio's Avatar
Posts: 25 | Thanked: 7 times | Joined on Sep 2008 @ California
#209
Originally Posted by GeneralAntilles View Post
Not exactly surprising. It matters a lot less, though, because I suspect the built-in card will be in the ballpark of 32GB.
That sounds great! I hope so.
 
fragos's Avatar
Posts: 900 | Thanked: 273 times | Joined on Aug 2008 @ Fresno CA USA
#210
Any storage card that is so small it can't be removed easily with your fingers isn't practical. The microSD in my phone can't be removed without a pair of tweezers. I'd rather have a device a little larger to be able to use a card that's handlable.
__________________
George Fragos
Internet Coach & Writer
Maemo Mapper HowTo
Personal Blog -- 3 Joe's Blog


N810 -- 5.2010.33-1
 

The Following 2 Users Say Thank You to fragos For This Useful Post:
Reply

Tags
fremantle, iphone killer, n900, rover, rx-51

Thread Tools

 
Forum Jump


All times are GMT. The time now is 02:47.