Active Topics

 

Posts: 875 | Thanked: 918 times | Joined on Sep 2010
#271
Originally Posted by tso View Post
there is a slight issue when using ppp connections right now. While the text says "connected" and there is a ip address shown, the square stays gray and tapping the wifi button seems to trigger a connection cycle rather then a disconnect.
Does the connection work? Can you run `dbus-monitor --system` while connecting and send me the output? Can you stop the connection outside of ASUI and also send the dbus-monitor output for that as well?
 
tso's Avatar
Posts: 4,783 | Thanked: 1,253 times | Joined on Aug 2007 @ norway
#272
yep, the connection work. I will try to get the captures.
__________________
Be warned, posts are often line of thoughts at highway speeds...
 
tso's Avatar
Posts: 4,783 | Thanked: 1,253 times | Joined on Aug 2007 @ norway
#273
here is a cap of a connect followed by a disconnect:
http://pastebin.com/EbgHvbkF
__________________
Be warned, posts are often line of thoughts at highway speeds...
 
Posts: 875 | Thanked: 918 times | Joined on Sep 2010
#274
Originally Posted by tso View Post
here is a cap of a connect followed by a disconnect
New test binary will also set the wifi.enabled flag in the signal that sets the connecting and connected state. Let me know if it fixes the problem.
 

The Following User Says Thank You to auouymous For This Useful Post:
Posts: 86 | Thanked: 8 times | Joined on May 2010
#275
I just want to say: 0.4.6 has been working with no glitches for me. Thanks for the very nifty app, and thanks to everyone who's been testing this so well.

If it were me, I'd call this 1.0.
 
Posts: 875 | Thanked: 918 times | Joined on Sep 2010
#276
Originally Posted by mcow View Post
I just want to say: 0.4.6 has been working with no glitches for me. Thanks for the very nifty app, and thanks to everyone who's been testing this so well.

If it were me, I'd call this 1.0.
Need a couple more important features and fixes before it can be 1.0
 
tso's Avatar
Posts: 4,783 | Thanked: 1,253 times | Joined on Aug 2007 @ norway
#277
Originally Posted by auouymous View Post
New test binary will also set the wifi.enabled flag in the signal that sets the connecting and connected state. Let me know if it fixes the problem.
yep, that fixed the issue.
__________________
Be warned, posts are often line of thoughts at highway speeds...
 
Posts: 875 | Thanked: 918 times | Joined on Sep 2010
#278
New test binary up.
  • moved brightness dsme code to dsme.c, brightness no longer has to create dsme socket for each change
  • green box around "Charged" in battery widget
  • flashlight and clock now use dsme to permanently disable blanking and enable it when they are closed
  • lock&blank will always blank even after a blanking pause was used, no more timer on the lock button
  • console errors will only be displayed for test and debug releases

Let me know if you have any blanking problems with the flashlight or clock, or with lock&blank button.
 

The Following 2 Users Say Thank You to auouymous For This Useful Post:
tso's Avatar
Posts: 4,783 | Thanked: 1,253 times | Joined on Aug 2007 @ norway
#279
seems to work ok here.

also, it seems that the changes have made it more likely to see less then 400mhz clock on ondemand.
__________________
Be warned, posts are often line of thoughts at highway speeds...
 
Posts: 875 | Thanked: 918 times | Joined on Sep 2010
#280
Originally Posted by tso View Post
it seems that the changes have made it more likely to see less then 400mhz clock on ondemand.
Thank you for reminding me about this. I noticed this was happening prior to this test release but forgot to look into it.
 
Reply

Tags
bada blows, bada rox

Thread Tools

 
Forum Jump


All times are GMT. The time now is 04:58.