Reply
Thread Tools
Posts: 271 | Thanked: 220 times | Joined on Sep 2009
#21
Originally Posted by Butterfly View Post
Which pre set do you use on handbrake. I have been using 'universal' but can't figure out how to change the output resolution to 800x480 so I have a black bar at either side of my movie.
I made my own using one of the included presets as a starting point. Besides specifiying the output resolution, you will also need to enable the auto-cropping and the anamorphic mode to get rid of the black bars.
 
Posts: 52 | Thanked: 11 times | Joined on Nov 2009 @ UK
#22
Originally Posted by texaslabrat View Post
I made my own using one of the included presets as a starting point. Besides specifiying the output resolution, you will also need to enable the auto-cropping and the anamorphic mode to get rid of the black bars.
Which preset do you use as a starting point? When I go into picture settings I cannot get resolution above 720. Can you please tell me the exact settings you use? Thanks
__________________
I love my N900
 

The Following User Says Thank You to Butterfly For This Useful Post:
RevdKathy's Avatar
Posts: 2,173 | Thanked: 2,678 times | Joined on Oct 2009 @ Cornwall, UK
#23
Thanks for the help guys.

Sadly, handbrake took over 3 hours to rip a dvd to something that n900 can't play (I'll fiddle about tomorrow and see if I can change that, but so far it didn't work).

AVS isn't free: the d/l installed will dump a watermark slap in the middle of the output screen unless I cough up $39.

I'll keep trying.
__________________
Hi! I'm Kathy and I'm a Maemo Greeter! Welcome.
Useful links for newcomers: New members say hello , New users start here, Community subforum, Beginners' wiki page, Maemo5 101, Frequently Asked Questions (FAQ)
Did you know Meego.com has forums too?
 
Posts: 3,428 | Thanked: 2,856 times | Joined on Jul 2008
#24
I am quite certain HandBrake *will* work. You just need to get the right settings.

I would try something much smaller for testing until you find the settings that work.. and then rip the 3 hour movie.
__________________
If I've helped you or you use any of my packages feel free to help me out.
-----------------------------------------------------------------------------------
Maintaining:
pyRadio - Pandora Radio on your N900, N810 or N800!
 

The Following 2 Users Say Thank You to fatalsaint For This Useful Post:
RevdKathy's Avatar
Posts: 2,173 | Thanked: 2,678 times | Joined on Oct 2009 @ Cornwall, UK
#25
Originally Posted by fatalsaint View Post
I am quite certain HandBrake *will* work. You just need to get the right settings.

I would try something much smaller for testing until you find the settings that work.. and then rip the 3 hour movie.
Yes, you're probably right: five minute eps of 'Ivor the Engine' would be a better place to start than the whole of 'It's a Wonderful Life'. And as you say, it's probably about tweaking the settings... but as a bear of very little brain, that's all a bit complex.
__________________
Hi! I'm Kathy and I'm a Maemo Greeter! Welcome.
Useful links for newcomers: New members say hello , New users start here, Community subforum, Beginners' wiki page, Maemo5 101, Frequently Asked Questions (FAQ)
Did you know Meego.com has forums too?
 
Posts: 52 | Thanked: 11 times | Joined on Nov 2009 @ UK
#26
Kathy, the default video codec setting on Handbrake is H.264 which will NOT work on N900. You need to change this to MPEG on the main screen. All my videos I've converted have worked using the 'universal' or 'high profile' setting, I just can't get rid of the black bars at either side.
__________________
I love my N900
 
Posts: 3,428 | Thanked: 2,856 times | Joined on Jul 2008
#27
Serious?? The website says:

Video playback file formats: .mp4, .avi, .wmv, .3gp; codecs: H.264, MPEG-4, Xvid, WMV, H.263
http://maemo.nokia.com/n900/

No H.264 would kind of suck.
__________________
If I've helped you or you use any of my packages feel free to help me out.
-----------------------------------------------------------------------------------
Maintaining:
pyRadio - Pandora Radio on your N900, N810 or N800!
 
Posts: 271 | Thanked: 220 times | Joined on Sep 2009
#28
Originally Posted by fatalsaint View Post
Serious?? The website says:



http://maemo.nokia.com/n900/

No H.264 would kind of suck.
yeah h.264 support seems to be very limited. I haven't had much luck with it. From what I understand, if you use ONLY the base profile it should work..but at that point you're usually better off with plain mpeg4 anyway. I've gotten my h.264 files to play with mplayer, but of course that isn't hardware accelerated so the performance is pretty bad.
 
Posts: 3,428 | Thanked: 2,856 times | Joined on Jul 2008
#29
Ick. I knew I was going to have to use mplayer when I got the N900... I just hope it's watchable when I do. I happen to really like H.264.
__________________
If I've helped you or you use any of my packages feel free to help me out.
-----------------------------------------------------------------------------------
Maintaining:
pyRadio - Pandora Radio on your N900, N810 or N800!
 
Posts: 78 | Thanked: 53 times | Joined on Nov 2009
#30
for h264 settings, use baseline L2.1 or L3 settings but do not use b-frames or the built in mediaplayer will choke. also, google for xvid4psp and use the ipod touch profile, it should work.
 
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 06:33.