|
2010-01-20
, 12:02
|
Posts: 114 |
Thanked: 12 times |
Joined on Dec 2009
|
#22
|
Sorry, without an actual error message, it's difficult to see what's wrong. I've just checked, and that's the error message I get if I enter an invalid file name. Can you show the output of "dir"?
|
2010-01-20
, 12:04
|
Posts: 114 |
Thanked: 12 times |
Joined on Dec 2009
|
#23
|
Download the flasher here and re-install
http://tablets-dev.nokia.com/maemo-d....5_2.5.2.2.exe
Download in to the same directory the firmware update and save it into C:\Program Files\maemo\flasher-3.5
http://tablets-dev.nokia.com/nokia_N...ED_MR0_ARM.bin
Open a command prompt and change directory to C:\Program Files\maemo\flasher-3.5
Turn the phone off and wait for it to completely shut down. Plug the USB cable into the computer NOT the phone, open the phone keyboard and hold down the U key while plugging the USB in, keep holding the U key until the display shows Nokia logo and a small USB symbol appears in the top right of the screen.
Type on the computer (Vista)
flasher-3.5.exe -F RX-51_2009SE_2.2009.51-1_PR_COMBINED_MR0_ARM.bin
The computer should show something like this:
flasher v2.5.2 (Oct 21 2009)
Image 'mmc', size 241163 kB
Version RX-51_2009SE_1.2009.41-1.VANILLA
Suitable USB device not found, waiting.
USB device found found at bus 001, device address 006.
Found device RX-51, hardware revision 2101
NOLO version 1.4.13
Version of 'sw-release': RX-51_2009SE_1.2009.42-11.002_PR_002
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus 001, device address 007.
Raw data transfer EP found at EP2.
[writing 74 % 179200 / 241163 kB 13180 kB/s]
Image(s) flashed successfully in 26.848 s (8982 kB/s)!
Should work
|
2010-01-20
, 12:20
|
|
Posts: 623 |
Thanked: 289 times |
Joined on Jan 2010
@ UK
|
#24
|
http://tablets-dev.nokia.com/maemo-d....5_2.5.2.2.exe
Download in to the same directory the firmware update and save it into C:\Program Files\maemo\flasher-3.5
http://tablets-dev.nokia.com/nokia_N...ED_MR0_ARM.bin
Open a command prompt and change directory to C:\Program Files\maemo\flasher-3.5
Turn the phone off and wait for it to completely shut down. Plug the USB cable into the computer NOT the phone, open the phone keyboard and hold down the U key while plugging the USB in, keep holding the U key until the display shows Nokia logo and a small USB symbol appears in the top right of the screen.
Type on the computer (Vista)
flasher-3.5.exe -F RX-51_2009SE_2.2009.51-1_PR_COMBINED_MR0_ARM.bin
The computer should show something like this:
flasher v2.5.2 (Oct 21 2009)
Image 'mmc', size 241163 kB
Version RX-51_2009SE_1.2009.41-1.VANILLA
Suitable USB device not found, waiting.
USB device found found at bus 001, device address 006.
Found device RX-51, hardware revision 2101
NOLO version 1.4.13
Version of 'sw-release': RX-51_2009SE_1.2009.42-11.002_PR_002
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus 001, device address 007.
Raw data transfer EP found at EP2.
[writing 74 % 179200 / 241163 kB 13180 kB/s]
Image(s) flashed successfully in 26.848 s (8982 kB/s)!
Should work