Page 3 of 4 12 3 4
Reply
Thread Tools
matts76's Avatar
matts76 is offline matts76
2010-04-18 , 16:25
Posts: 324 | Thanked: 201 times | Joined on Apr 2010 @ UK
#21
Originally Posted by JayMontano View Post
Hi there.
In the link below, I've tried to simplify the Hard Reset/Flashing info. There aren't any screenshots in this one unfortunately (I did have in a previous post but mysteriously disappeared in wordpress drafts :S)

I have uber basic knowledge of this stuff and even I managed to flash the N900 so I guess if I can do it, everyone else would be able to.

CLICK
I tried following this guide but im getting this

C:\Users\Vicky&Matt>cd\program files\maemo\flasher-3.5flasher-3.5.exe -F RX-51_2
009SE_3.2010.02-8_PR_COMBINED_MR0_ARM.bin -f -R
The system cannot find the path specified.

C:\Users\Vicky&Matt>
i have the firmware in c/programfiles/maemoflasher-3.5 andstartmunu/programs/maemo/flasher 3.5
(by the way i really do need to flash now bootup stops at 5 dots, no problems getting it into flash mode though
__________________
My N900@1Ghz Rocks
I wanted a phone, but i ended up with an all encompasing obsession
 

The Following User Says Thank You to matts76 For This Useful Post:
JayMontano is offline JayMontano
2010-04-18 , 16:27
Posts: 151 | Thanked: 135 times | Joined on Jan 2007
#22
Originally Posted by matts76 View Post
I tried following this guide but im getting this

C:\Users\Vicky&Matt>cd\program files\maemo\flasher-3.5flasher-3.5.exe -F RX-51_2
009SE_3.2010.02-8_PR_COMBINED_MR0_ARM.bin -f -R
The system cannot find the path specified.

C:\Users\Vicky&Matt>
i have the firmware in c/programfiles/maemoflasher-3.5 andstartmunu/programs/maemo/flasher 3.5
(by the way i really do need to flash now bootup stops at 5 dots, no problems getting it into flash mode though
Are those two files in C:\Program Files\maemo\flasher-3.5 ?
 
squirreluk is offline squirreluk
2010-04-18 , 16:30
Posts: 124 | Thanked: 4 times | Joined on Nov 2009 @ uk
#23
i reflashed mine today as i swapped it for another phone, went ok using this guide, i did flash with the old fw first by mistake and it did not detect my network.
 
thefoxtrot's Avatar
thefoxtrot is offline thefoxtrot
2010-04-19 , 01:35
Posts: 144 | Thanked: 32 times | Joined on Jan 2010 @ Cali
#24
Originally Posted by matts76 View Post
I tried following this guide but im getting this

C:\Users\Vicky&Matt>cd\program files\maemo\flasher-3.5flasher-3.5.exe -F RX-51_2
009SE_3.2010.02-8_PR_COMBINED_MR0_ARM.bin -f -R
The system cannot find the path specified.

C:\Users\Vicky&Matt>
i have the firmware in c/programfiles/maemoflasher-3.5 andstartmunu/programs/maemo/flasher 3.5
(by the way i really do need to flash now bootup stops at 5 dots, no problems getting it into flash mode though

I got mine to reflash, I may be of some help. Maybe tell me step-by-step what you do when trying to reflash?

You are sure you have the correct firmware file? You only need to put that .bin file in the flasher3.5 folder (the same folder with the .exe).

What did you put in the command prompt?
 
matts76's Avatar
matts76 is offline matts76
2010-04-19 , 09:25
Posts: 324 | Thanked: 201 times | Joined on Apr 2010 @ UK
#25
well i think ive finaly got the flasher 3.5 working but now it gives me this message

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Windows\system32>cd\program files\maemo\flasher-3.5

C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_3.2010.02-8_P
R_COMBINED_MR0_ARM.bin -f -R
flasher v2.5.2 (Sep 24 2009)

SW version in image: RX-51_2009SE_3.2010.02-8_PR_MR0
Image 'kernel', size 1704 kB
Version 2.6.28-20094803.3+0m5
Image 'rootfs', size 158336 kB
Version RX-51_2009SE_3.2010.02-8_PR_MR0
FIASCO subimage data length mismatch

C:\Program Files\maemo\flasher-3.5>
__________________
My N900@1Ghz Rocks
I wanted a phone, but i ended up with an all encompasing obsession
 

The Following User Says Thank You to matts76 For This Useful Post:
matts76's Avatar
matts76 is offline matts76
2010-04-19 , 09:39
Posts: 324 | Thanked: 201 times | Joined on Apr 2010 @ UK
#26
Ok i think ice just had a breakthrough on atempting to download the firmware again ive just noticed that the one i downloaded yesterday was far too small (like 160mb too small) and trying to download it again today its just sitting at 1%, i guess thats what it did yesterday and then for some reason showed as complete, does anyone know if there is anywhere else i can download it from
thanks
__________________
My N900@1Ghz Rocks
I wanted a phone, but i ended up with an all encompasing obsession
 

The Following User Says Thank You to matts76 For This Useful Post:
matts76's Avatar
matts76 is offline matts76
2010-04-19 , 09:59
Posts: 324 | Thanked: 201 times | Joined on Apr 2010 @ UK
#27
Each time i try to download the firmware it gets to about 3-4mb sits there for a bit and then tells me its complete when its obviously not, ive been using firefox and am just trying windows explorer but so far its looking the same, also i have cookies enabled, this is realy starting to do my head in
__________________
My N900@1Ghz Rocks
I wanted a phone, but i ended up with an all encompasing obsession
 

The Following User Says Thank You to matts76 For This Useful Post:
ali.harmouch is offline ali.harmouch
2010-04-24 , 12:12
Posts: 104 | Thanked: 2 times | Joined on Feb 2010
#28
Originally Posted by moshikko View Post
check your inbox i sent you a step by step guide how to flash your device - PM if you need any more help
Sorry can you provide me the same?
Regards
 
rdwrig0ceo is offline rdwrig0ceo
2010-05-01 , 15:17
Posts: 21 | Thanked: 7 times | Joined on Jan 2010
#29
Please help,

SOmehow I bricked my N900. SO I tried to flash it and I followed the wiki step by step. Got all the way to the end and it quickly does something but nothing happens. Please help.

Basically I installed the wifi mobilehotspot app and then removed it. Also removed the custom kernel it creates. Once I did that I powered down the device and then the device would not start. It says Nokia screen and 4 dots and then it cuts off.

I then downloaded the firmware and flasher 3.5. Followed all the steps in the wiki. Everything happened as the wiki said but the ending is not complete for me. Wiki says after connecting USB to Nokia while pressing "U" then start the flasher. It does all that for me but nothing happens, no flickering on the N900 or anything. Wiki says it'll take 4-5 minutes. Is there any picture that shows what will take 4-5 minutes or are you suppose to just keep the N900 connected for 4-5 mins using a timer and then unplug.

Please help, thanks in advance.

Also when connected to the AC/DC power plug it constantly reboots from a completely black screen to the greyed screen with Nokia letters.
 
Jezz is offline Jezz
2010-05-07 , 09:29
Posts: 164 | Thanked: 20 times | Joined on Jan 2010 @ Bucks, UK
#30
Just tried to reflash my n900, when i put in the flash code in the flasher cmd prompt i says the whole code again but with %m at the end? I flashed it to this firmware previously with no problem exactly the same way, but now it does nothing? What does the %m mean?
 
Reply
Page 3 of 4 12 3 4

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 00:41.

Contact Us - Home - Archive - Top