Reply
Thread Tools
Posts: 13 | Thanked: 1 time | Joined on Apr 2010 @ Helsinki
#21
Originally Posted by RobbieThe1st View Post
If it charges from your PC, then the N900's not broken.
If it won't charge from your Nokia wall-charger, then that may be broken. I assume it won't charge from the other chargers because the two middle pins aren't connected to each other.
Just a follow-up to my previous post and the phone not being broken...

I had problems charging my N900, it only charged via USB from a computer, no wall charger was able to charge it. EXCEPT one! An old Nokia charger which needed a USB-adapter plugged on top of it (it had that round connector)... That was strange, but soon after explained itself, somehow.

Soon after I found that this wall charger powered my N900, it would not charge anymore when it was normally plugged, the cable or connector had to be bent in some way. Likewise, charging deteriorated for the PC-USB-cable.

Nothing else helped but to take the N900 to the Nokia repair center. Sure enough, after two weeks I have a phone that I can charge again with almost any charger that fits the plug. Free repair, no questions asked. Btw, got a new IMEI during the repair process...
 
Posts: 235 | Thanked: 89 times | Joined on Oct 2009 @ italy
#22
hi guys, since last weeks everytime I plug in charger (wall and usb) I've to plug well inside the jack otherwise my device begin to charge/disconnect charger...
also if I write using phisical keyboard (cable between my fingers) I've this problem. to recharge battery without this alternate charge/disconnect I've just to leave my n900 on some place without touch it.
Is my microusb connector breaking?
__________________
If you found my post useful please thank me, I appreciate!
 
Posts: 13 | Thanked: 1 time | Joined on Apr 2010 @ Helsinki
#23
Hello!

Well, it definitely sounds to be heading that way. That is how it started with my device, too. Charging got difficult and flaky, it was best to leave the device alone. In the end, I even had to bend the plug and apply pressure to make it charge.
 

The Following User Says Thank You to ESmith For This Useful Post:
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 08:05.