Reply
Thread Tools
Posts: 138 | Thanked: 100 times | Joined on Oct 2011
#21
Volume for videos & music are in purple.
Ringtones in blue. Click on the "Ringing" it will appear. You can either slide it with your finger or use the buttons at the side.

Vibration, Touchscreen Vibration can be changed up to level 3 max. I find the vibration strong, can feel it in my pocket everytime an update or sms,etc comes.
Ringtone depends on the tune used, I dont put it on max anyway, use vibrate more. I also have the "Dolby Sound" enabled for both music & video.
Attached Images
 

Last edited by eaglehelang; 2012-03-26 at 16:58.
 

The Following User Says Thank You to eaglehelang For This Useful Post:
Posts: 1,539 | Thanked: 1,604 times | Joined on Oct 2011 @ With my N9
#22
Originally Posted by eaglehelang View Post
Volume for videos & music are in purple.
Ringtones in blue. Click on the "Ringing" it will appear. You can either slide it with your finger or use the buttons at the side.

Vibration, Touchscreen Vibration can be changed up to level 3 max. I find the vibration strong, can feel it in my pocket everytime an update or sms,etc comes.
Ringtone depends on the tune used, I dont put it on max anyway, use vibrate more. I also have the "Dolby Sound" enabled for both music & video.
I'm not talking about touch screen vibrations, I am talking about vibration for incoming calls, sms, and emails. Am I missing something here?
__________________
Arie|www.everythingn9.com|Nokia N9 64GB x2|Nokia N950

@everythingn9

Temporary Inception Fix


Times Banned from TMO: 4
 
Posts: 138 | Thanked: 100 times | Joined on Oct 2011
#23
Originally Posted by Arie View Post
I'm not talking about touch screen vibrations, I am talking about vibration for incoming calls, sms, and emails. Am I missing something here?
It could just be me, but vibration is stronger at Level 3, not a big difference but a difference.

Under "Vibration Profile", are the blue boxes enabled? If not, no vibration
 
Posts: 1,539 | Thanked: 1,604 times | Joined on Oct 2011 @ With my N9
#24
Originally Posted by eaglehelang View Post
It could just be me, but vibration is stronger at Level 3, not a big difference but a difference.

Under "Vibration Profile", are the blue boxes enabled? If not, no vibration
Yes, I thought this was mandatory for vibration via calls and sms.

Call and sms vibration was not stronger via increasing touch screen vibration to level 3. I think it's just you. Though it could be hopeful thinking on my behalf that it's not just you.
__________________
Arie|www.everythingn9.com|Nokia N9 64GB x2|Nokia N950

@everythingn9

Temporary Inception Fix


Times Banned from TMO: 4
 
Posts: 138 | Thanked: 100 times | Joined on Oct 2011
#25
Originally Posted by Arie View Post
Yes, I thought this was mandatory for vibration via calls and sms.

Call and sms vibration was not stronger via increasing touch screen vibration to level 3. I think it's just you. Though it could be hopeful thinking on my behalf that it's not just you.
I noticed that if under 'Silent' mode, Vibration is not enabled. I had to slide it over to enable it
 
Posts: 6 | Thanked: 0 times | Joined on May 2013 @ Bangalore
#26
Originally Posted by rexii23 View Post
I have found a temp solution for the ringer volume.
go into terminal as root
devel-su
password: rootme
then type alsamixer

keep pressing right until you see PreDriv.
press 'k' to increase to 100, press 'j' to decrease.
press 'ESC' to quit.

This increases the ringer volume by quite a bit, although it is slightly distorted. Still better than missing calls!!!!

Apparently upon reset alsamixer resets itself so some script is needed to adjust this on startup. If anyone can help with that it would be awesome!

===========================
buzzzzzzzzzzz
well I have solution if u all wanna try it.
i promise the predrive volume will be always to 100% even after a call and plugin and plugout of ear or headphones and even after reboot of ur nokia N9. 1st u have to remove tweak s : 4 for changing predrive volume to 100% after reboot from N9QT
the methods are: goto this path "/usr/share/pulseaudio/alsa-mixer/paths" in ur phone root without the quote and select 'nokia-dfl61-twl4030-output-ihfandheadset.conf and nokia-dfl61-twl4030-output-headset-call.conf and nokia-dfl61-twl4030-output-ihf.conf'-this three files.
copy down all three files into your system and open it using any editor (eg c-free 5.0 "in case of mine")

and edit the line with [Element PreDriv]
volume = 2' for all three files

change volume = (2 to 3) for all three file and Yo except value 3 1 n 2 if u input else (100, 20 any value the u have to rum n9 terminal every after each boot up to fix alsamixer predrive to 100% manually
coz in the Element PreDriv
volume = 0(means 0 u know it logical)
volume = 1(means 33% not 10 or else)
volume = 2(means 67% default) and volume = 3(is 100%..
u don't believe ya am sure u ain't check urself try it..frns..
"DONNOT CHANGE ANY OTHER VALUES OR ELSE WILL end up with no sound if mistaken "
after making change save the file as it is no further change if u wanna get irritate with ur n9 then change more value as ur wish..
now the real things.. how to feed this values into the phone root files..
??? any clue..
use 'filebox root' from N9qt of u can run terminal command if u know how to run copy n replace command in terminal.. (yea every1 knows kidding:P)
"if u get ur phone with NO sound then its not my fault. coz all u did is error in the file editing am not responsible for any.."
 
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 12:08.