Reply
Thread Tools
Posts: 22 | Thanked: 0 times | Joined on Dec 2012
#21
I have this two , how to find pr 1.3
Attached Images
 
 
Moderator | Posts: 6,215 | Thanked: 6,400 times | Joined on Nov 2011
#22
Yup those images are correct... Use the first one as that's the rootfs.bin while the second one is emmc.bin which you don't need to flash currently...
 
Posts: 22 | Thanked: 0 times | Joined on Dec 2012
#23
can I rename files
 
Posts: 22 | Thanked: 0 times | Joined on Dec 2012
#24
and now what to do whit flasher
 
Posts: 22 | Thanked: 0 times | Joined on Dec 2012
#25
it`s a same masage
Attached Images
 
 
Moderator | Posts: 6,215 | Thanked: 6,400 times | Joined on Nov 2011
#26
You see on navifirm you showed me you a pr1.3 image but again you are flashing with a pr1.2 image!

Please use pr1.3 image and do the flash!

The image name for pr1.3 contains 40.2012 while pr1.2 is 30.2012 so you are using a 30.2012 image to flash...
 

The Following User Says Thank You to thedead1440 For This Useful Post:
Posts: 22 | Thanked: 0 times | Joined on Dec 2012
#27
I have to go on the road and will try later.
thanks
 
Posts: 22 | Thanked: 0 times | Joined on Dec 2012
#28
It ' s ok

phone working

Thanks for your time .....
 
Posts: 20 | Thanked: 9 times | Joined on Mar 2012 @ Portugal
#29
i never had to do that ... I just let it turn on, and keep the power button pressed about 8 to 10 seconds, to forc it to shut down, connected to the wall charger. It automaticly will boot into MeeGo Off Charge state, and stays with the battery symbol and start offline mode charge.

(sorry about my english)
 
Posts: 22 | Thanked: 0 times | Joined on Dec 2012
#30
?When I did this , now I don`t have 16 gb , I have 9 gb, Whay?
 
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 17:38.