No Problem..

So I take you were able to install it, reboot, and boot from MMC correct?

The 60mb is probably the FAT partition.. if you had a raw diablo with no added packages your 2gb card will actually have like 1.3gb left... run "df -h" in a terminal and your / should show 1.3 or so GB..

i don't know why but it says booting from flash when i reboot the tablet, is that right? i placed the file on the device in documents and instelled from the application manager so i followed those directions. i'm going to try out the xterm and enter the code you gave.

make sure when you reboot you are not plugged in.. the device doesn't fully shut off when it's plugged in.

~ $ df -h
Filesystem Size Used Available Use% Mounted on
/dev/mtdblock4 4.0M 2.2M 1.8M 54% /mnt/initfs
none 512.0k 84.0k 428.0k 16% /mnt/initfs/tmp
/dev/mtdblock4 249.5M 148.2M 101.3M 59% /
none 512.0k 84.0k 428.0k 16% /tmp
none 1.0M 60.0k 964.0k 6% /dev
tmpfs 1.0M 0 1.0M 0% /dev/shm
/dev/mmcblk0p1 60.4M 408.0k 60.0M 1% /media/mmc2

after i entered the code i got this response from xterminal.

it was unplugged

something doesn't add up, the internal card says that it has only 408 kb used and 60.4mb total size and 60mb left so something isn't adding up. even the device went down in memory, i reinstalled the diablo to the device and tried to follow the install tools steps. beyond my knowledge lol.

try one of these:

http://www.internettablettalk.com/fo...5&postcount=68

I think you missed the boot menu at start up, it sounds like you just booted back into internal memory. Try watching the screen at reboot and press 'menu' when it says, and then you can boot off a card.

ok i tried ericdkirk's advice and that was a new direction for me, the memory for the device shot up to 389.1MB and the internal card is still at 60mb, it says total size is 60.4mb then 408kb in use then available is 60mb does that sound right? it booted i assume from the card atleast thats what i chose at the boot menu screen.

is there something else i should do? i'm just being cautious before i begin putting applications on again, is it safe