Active Topics
-
The N900 is now 15 years old! (9)
to Nokia N900 by Arno_11 - 14 hrs, 8 mins ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 6 days, 2 hrs ago - more...
|
2010-05-10
, 19:01
|
|
Posts: 1,751 |
Thanked: 844 times |
Joined on Feb 2010
@ Sweden
|
#3552
|
Originally Posted by dimkit
This question is better suited for the maker of the script. But by the looks of it. It's one to much of "fi". Every "if" ends with "fi" and the script has one to many.
thanks a lot for the help but now i take another error
line 28 : syntax error: "fi' unexpected (expecting 'then')
Try removing the last "fi" and then try again.
My scripting knowledge are veeeeery basic so if someone understand this better please make a post
|
|
2010-05-10
, 19:16
|
|
Posts: 59 |
Thanked: 7 times |
Joined on Jan 2010
|
#3553
|
i have try deleting for the last lines the one 'fi' but again i receive the same error
|
|
2010-05-11
, 05:55
|
|
Posts: 38 |
Thanked: 13 times |
Joined on Oct 2009
|
#3554
|
a new version of my script used to change kernel settings based on battery temperature.
i am sorry for the typo in my last post.
usage instructions.
copy the contents into a file.
chmod +x FILENAME
type sudo :/FILENAME & (while in the same directory)
you can replace the word ideal, with any other profile (starving, xlv, lv or your own)
You can replace the speeds with any speed supported by the kernel
You can change the temperatures (currently 45, and 40)
You can change the frequency of probing (change sleep 30 to sleep 60 if you want it to run every minute).
It should be possible to move the modeprobe command outside the loop, but it does not work on my system.
One word of guidance, at low temperatures you can use lower voltages. When the temperature becomes higher, the same voltage would not work anymore.
Script follows
#!/bin/sh
set old="fhy"
set limits="yyu"
set oldlimits="r"
set new="rrr"
while test 2 -gt 1;
do
modprobe bq27x00_battery
read tmpr </sys/class/power_supply/bq27200-0/temp
if test $tmpr -gt 45;
then new="default";
limits="250 600";
else
if test $tmpr -gt 40;
then new="ideal";
limits="500 600";
else new="ideal";
limits="500 900"
fi
fi
if test "$old" != "$new"
then
/usr/sbin/kernel-config load "$new";
oldlimits="ttt";
old=$new;
fi
if test "$limits" != "$oldlimits";
then
/usr/sbin/kernel-config limits $limits;
oldlimits=$limits;
fi
sleep 30
done
Last edited by sdpkom; 2010-05-11 at 06:05.
i am sorry for the typo in my last post.
usage instructions.
copy the contents into a file.
chmod +x FILENAME
type sudo :/FILENAME & (while in the same directory)
you can replace the word ideal, with any other profile (starving, xlv, lv or your own)
You can replace the speeds with any speed supported by the kernel
You can change the temperatures (currently 45, and 40)
You can change the frequency of probing (change sleep 30 to sleep 60 if you want it to run every minute).
It should be possible to move the modeprobe command outside the loop, but it does not work on my system.
One word of guidance, at low temperatures you can use lower voltages. When the temperature becomes higher, the same voltage would not work anymore.
Script follows
#!/bin/sh
set old="fhy"
set limits="yyu"
set oldlimits="r"
set new="rrr"
while test 2 -gt 1;
do
modprobe bq27x00_battery
read tmpr </sys/class/power_supply/bq27200-0/temp
if test $tmpr -gt 45;
then new="default";
limits="250 600";
else
if test $tmpr -gt 40;
then new="ideal";
limits="500 600";
else new="ideal";
limits="500 900"
fi
fi
if test "$old" != "$new"
then
/usr/sbin/kernel-config load "$new";
oldlimits="ttt";
old=$new;
fi
if test "$limits" != "$oldlimits";
then
/usr/sbin/kernel-config limits $limits;
oldlimits=$limits;
fi
sleep 30
done
Last edited by sdpkom; 2010-05-11 at 06:05.
|
|
2010-05-11
, 08:23
|
|
Posts: 155 |
Thanked: 61 times |
Joined on Nov 2009
|
#3555
|
Loving kernel-power.
Just wondering if you (the Titan) could add these options to your build: CONFIG_NET_SCHED NET_SCH_INGRESS and CONFIG_IP_ADVANCED_ROUTER
I want to be able to setup ip rules so that I can have multiple route tables (makes sending say, Skype or jabber etc, over a VPN easy)
Cheers!!
Just wondering if you (the Titan) could add these options to your build: CONFIG_NET_SCHED NET_SCH_INGRESS and CONFIG_IP_ADVANCED_ROUTER
I want to be able to setup ip rules so that I can have multiple route tables (makes sending say, Skype or jabber etc, over a VPN easy)
Cheers!!
 |
|
2010-05-11
, 10:23
|
|
Posts: 3,203 |
Thanked: 1,391 times |
Joined on Nov 2009
@ Worthing, England
|
#3556
|
Hi Everyone,
First of all a quick apology, i really am trying - and not so much failing, but failing to find the correct information. Have searched the wikie, and read through most of these pages - but hoping someone can point me in the right direction.
I have managed the overclock fine on a few occasions, so all good.
Now i'm trying to add the buttons as similar to this post
But really i would love to get something like this
- Linky to Jakimans post (screeny in there)
As you can see below - i have followed the guide to get the ideal buttons, and have added two more. So all seems good.
Any quick links or assistance people may have in adding the following :
Current desktop
Current frequencies available
First of all a quick apology, i really am trying - and not so much failing, but failing to find the correct information. Have searched the wikie, and read through most of these pages - but hoping someone can point me in the right direction.
I have managed the overclock fine on a few occasions, so all good.
Now i'm trying to add the buttons as similar to this post
But really i would love to get something like this
- Linky to Jakimans post (screeny in there)As you can see below - i have followed the guide to get the ideal buttons, and have added two more. So all seems good.
Any quick links or assistance people may have in adding the following :
- A button for 800/850 mhz (or near)
- A button for 950 mhz (or near)
- A button for 1 ghz (or near)
- The last one i think i can do, but i want to set the lower value to 125mhz (Currently have them available but loads normal values on load)
Current desktop
Current frequencies available
__________________
----------- Follow me on Twitter here
----------- My Photography Website and Blog is here
----------- Author of the N900 Health Check Application ----------- New Version in Extras Devel (Dec 2010 - 2.9.10)
----------- Are you on the N900 World Map? - http://pininthemap.com/maemo - masterpin: shotgun
----------- What apps do you want to see on the n900 or in MeeGo in the future? -
----------- Follow me on Twitter here
----------- My Photography Website and Blog is here
----------- Author of the N900 Health Check Application ----------- New Version in Extras Devel (Dec 2010 - 2.9.10)
----------- Are you on the N900 World Map? - http://pininthemap.com/maemo - masterpin: shotgun
----------- What apps do you want to see on the n900 or in MeeGo in the future? -
|
|
2010-05-11
, 11:47
|
|
Posts: 10 |
Thanked: 2 times |
Joined on Jan 2010
|
#3557
|
Originally Posted by jaemo
Hello, have the same problem here, I cannot use Joikuspot anymore.
I have the latest titan kernel installed. since yesterday i try to use tethering with a program named joikuspot. it semms that joikuspot didnt work with the titan kernel?
mayby thats not right, because with stock kernel i am able to connect to my windows machine. all linux boxes cant connect with both kernels to n900 (i use wicd on debian squeeze, kernel 2.6.33)? somebody using joikuspot and can give information?
thanks and sorry for poor english!
sorry for off topic, but mayby kernel related.
|
|
2010-05-11
, 12:16
|
|
Posts: 1,729 |
Thanked: 388 times |
Joined on Jan 2010
@ Canada
|
#3558
|
Originally Posted by noobmonkey
as i understand, you need codes?
Hi Everyone,
First of all a quick apology, i really am trying - and not so much failing, but failing to find the correct information. Have searched the wikie, and read through most of these pages - but hoping someone can point me in the right direction.
I have managed the overclock fine on a few occasions, so all good.
Now i'm trying to add the buttons as similar to this post
But really i would love to get something like this
As you can see below - i have followed the guide to get the ideal buttons, and have added two more. So all seems good.
Any quick links or assistance people may have in adding the following :
- A button for 800/850 mhz (or near)
- A button for 950 mhz (or near)
- A button for 1 ghz (or near)
- The last one i think i can do, but i want to set the lower value to 125mhz (Currently have them available but loads normal values on load)
Current desktop
Current frequencies available
you helped me a lot with the health check now its my turn to return the favor.
in the Queen beecon app.
-add Cmd
-name: whatever you wish
-command (1ghz): echo "echo 1000000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq" | sudo gainroot
change the numbers on the freq you wish.
for ideal, xlv, lv, ulv.
-comm: echo "/usr/sbin/kernel-load /usr/share/kernel-power-settings/default" | sudo gainroot
change "default" to ideal, xlv, ulv.....
all those are making the commands in queenbee. others are just for your personalization.
and one more. on the update options,
-only check the "update when click" uncheck the others
__________________
if i did help you, just click "Thanks" on the lower right of my post. thanks!
"The best way to break a Spell is to prevent it from being cast in the first place"
N900: 1000/1150mhz; sampling_rate 15; up_threshold 150000;
if i did help you, just click "Thanks" on the lower right of my post. thanks!
"The best way to break a Spell is to prevent it from being cast in the first place"
N900: 1000/1150mhz; sampling_rate 15; up_threshold 150000;
Last edited by gabby131; 2010-05-12 at 07:16.
| The Following 3 Users Say Thank You to gabby131 For This Useful Post: | ||
 |
|
2010-05-11
, 12:31
|
|
Posts: 91 |
Thanked: 34 times |
Joined on Apr 2010
@ Italy
|
#3559
|
Say I want to just lower the min freq to 125MHz. Would this work:
"echo 125 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq" | sudo gainroot
?
With scaling_min_freq
"echo 125 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq" | sudo gainroot
?
With scaling_min_freq
|
|
2010-05-11
, 12:38
|
|
Posts: 946 |
Thanked: 1,650 times |
Joined on Oct 2009
@ Germany
|
#3560
|
Originally Posted by cfeleaga
I don't have nor use Joikuspot but the module is included in my kernel.
Hello, have the same problem here, I cannot use Joikuspot anymore.
I don't know how it works but if it only tries to insmod its own
module for the Nokia kernel then you could manually "modprobe JoikuSpot_Bouncer".
does that work?
| The Following 2 Users Say Thank You to titan For This Useful Post: | ||
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
|
All times are GMT. The time now is 07:50.
line 28 : syntax error: "fi' unexpected (expecting 'then')