Active Topics
-
[HOWTO] Comprehensive Firmware Flashing Guide for N9 (1,580)
to Nokia N9 / N950 by aspergerguy - 1 day, 2 hrs ago -
Nokia N9-00 Prototype Build S1.12 (RM-680 codename "Dali") (250)
to Nokia N9 / N950 by en0s - 3 days, 22 hrs ago -
[Announce] Maebble - Pebble support for Maemo (118)
to Applications by glo-worm - 4 days, 11 hrs ago -
Possible to flash Leste to eMMC? (6)
to Maemo 7 / Leste by Eri - 5 days, 1 hr ago - more...
wmarone |
2010-01-18
, 02:09
|
|
Posts: 1,746 |
Thanked: 2,100 times |
Joined on Sep 2009
|
#31
|
Originally Posted by 2disbetter
UltraVNC supports Vista and 7, and works fine with the VNC client in the repository.
|
|
2010-01-18
, 07:55
|
|
Posts: 47 |
Thanked: 1 time |
Joined on Nov 2009
|
#32
|
A use x11vnc as server and if i enter "hello" then "hheelllloo" will be entered.
Each letter is entered twice.
Each letter is entered twice.
|
|
2010-01-20
, 00:07
|
|
Posts: 257 |
Thanked: 51 times |
Joined on Dec 2009
|
#33
|
hey everyone
i have a little problem using vnc viewer from my n900 to connect to my laptop. i hope you know whats wrong...
i enter my ip adress and connect, enter the password and i can see my desktop BUT the problem is that i cant move or do anything on the screen. its there, actualizing every second or so, but i cant click or do anything!!! i cant even send ctrl+alt+del command... and after a small time lets say 1 min, it says connection lost...
whats wrong?
i have a little problem using vnc viewer from my n900 to connect to my laptop. i hope you know whats wrong...
i enter my ip adress and connect, enter the password and i can see my desktop BUT the problem is that i cant move or do anything on the screen. its there, actualizing every second or so, but i cant click or do anything!!! i cant even send ctrl+alt+del command... and after a small time lets say 1 min, it says connection lost...
whats wrong?
|
|
2010-01-22
, 00:31
|
|
Posts: 47 |
Thanked: 3 times |
Joined on Jan 2010
|
#34
|
I just tried setting this up and can't get it to work. I installed Enterprise on my pc (Windows XP 32-bit) and have set the Encryption to "Prefer on".
I've tested a VNC Client on my laptop, both in the local network and via an external network, and it worked ok.
When I try with the N900 I get a "Could not connect to server" error both locally and externally. I'm trying the following IPs;
192.168.0.2:5800 (locally)
xxx.xxx.xxx.xxx:5800 (externall)
I have a DG834G router and have port forwarded 5500, 5800 & 5900 to 192.168.0.2.
Any ideas?
I've tested a VNC Client on my laptop, both in the local network and via an external network, and it worked ok.
When I try with the N900 I get a "Could not connect to server" error both locally and externally. I'm trying the following IPs;
192.168.0.2:5800 (locally)
xxx.xxx.xxx.xxx:5800 (externall)
I have a DG834G router and have port forwarded 5500, 5800 & 5900 to 192.168.0.2.
Any ideas?
|
|
2010-01-22
, 00:44
|
|
Posts: 4,030 |
Thanked: 1,633 times |
Joined on Jul 2007
@ nd usa
|
#35
|
I am using tightVNC on winXP, and it works from within (subnet, 192.168.1.xxx) and outside (external ip address). The only requirement tightVNC requires is to set up a user ID.
I would try to setup working within the network before attempting to do outside the network.
We all know there is 2 firewalls one has to deal with. One is your virus protection, which automatically setup a firewall which can be the same or can be different from your window firewall.
My setup are detailed here, http://talk.maemo.org/showthread.php?t=35043
bun
I would try to setup working within the network before attempting to do outside the network.
We all know there is 2 firewalls one has to deal with. One is your virus protection, which automatically setup a firewall which can be the same or can be different from your window firewall.
My setup are detailed here, http://talk.maemo.org/showthread.php?t=35043
bun
__________________
WorldTV99, WorldTV99forN900, more, VCURLs72, Shortcuts; complete backup; gvm software; 2007He; LiveTV;
DualBoot
WorldTV99, WorldTV99forN900, more, VCURLs72, Shortcuts; complete backup; gvm software; 2007He; LiveTV;
DualBoot
|
|
2010-01-22
, 02:36
|
|
Posts: 67 |
Thanked: 17 times |
Joined on Nov 2009
|
#36
|
May I know if there is a way to clear the IP history list (IP that was connected to in the past)?
Last edited by wongjemi85; 2010-01-22 at 02:41.
Last edited by wongjemi85; 2010-01-22 at 02:41.
|
|
2010-01-22
, 09:34
|
|
Posts: 3,617 |
Thanked: 2,412 times |
Joined on Nov 2009
@ Cambridge, UK
|
#37
|
Originally Posted by norstadt
Port 5800 is usually for the Java applet, so unless you've reset this you should be using 5900 (or just :0) in the VNC client.
I just tried setting this up and can't get it to work. I installed Enterprise on my pc (Windows XP 32-bit) and have set the Encryption to "Prefer on".
I've tested a VNC Client on my laptop, both in the local network and via an external network, and it worked ok.
When I try with the N900 I get a "Could not connect to server" error both locally and externally. I'm trying the following IPs;
192.168.0.2:5800 (locally)
xxx.xxx.xxx.xxx:5800 (externall)
I have a DG834G router and have port forwarded 5500, 5800 & 5900 to 192.168.0.2.
Any ideas?
 |
|
2010-01-22
, 14:07
|
|
Posts: 664 |
Thanked: 160 times |
Joined on Jul 2008
@ Australia
|
#38
|
Sorry for this completely noob question but how do I set up my router etc to be able to VNC to my home network from a different network. Locally I can VNC to my Vista laptop with my n900 and its awesome and it would be super awesome if I could do the same from completely different network. BTW, I'm using D-Link Dir-300 router. Thank you.
|
|
2010-01-22
, 19:53
|
|
Posts: 47 |
Thanked: 3 times |
Joined on Jan 2010
|
#39
|
Originally Posted by Rob1n
Thanks for pointing that out. But I tried 5900 and am still getting the same error when I attempt from outside. But if I try 5900 on the local network I get an immediate "Connection failed" response. Perhaps I'm still missing something in my router setup.
Port 5800 is usually for the Java applet, so unless you've reset this you should be using 5900 (or just :0) in the VNC client.
