Page 4 of 4 « First 23 4
Reply
Thread Tools
droll is offline droll
2010-08-04 , 00:22
Posts: 958 | Thanked: 483 times | Joined on May 2010
#31
ok, what ringtone are you using? is it a custom ring tone?
 
shazosbourne's Avatar
shazosbourne is offline shazosbourne
2010-08-04 , 00:41
Posts: 257 | Thanked: 205 times | Joined on Jan 2010 @ Sydney, Australia
#32
Originally Posted by Taleydra View Post
read this for the fix http://talk.maemo.org/showthread.php?t=54556
As far as I could work out the laggy phone application isn't related to the screen glitch. I had both.
I fixed the screen glitch last week using the fix by MohommadAG but the laggy phone application continued.
I counted 5 rings on the callers phone (when I tested) and others asked why so long to answer etc.

I finally bit the bullet and reflashed my n900 and now the phone responds on or milliseconds after the first ring on the callers side.

All in all it took about 20 minutes to flash and then use the restore applications feature and I'm back and going with the phone working properly.
I looked everywhere for a fix to this and flashing looks like the only answer.
 
egoshin is offline egoshin
2010-08-04 , 01:00
Posts: 992 | Thanked: 995 times | Joined on Dec 2009 @ California
#33
Actually, it looks like you have too many running applications - it causes swapping out the phone components and you have delay.

The most suspicious component - trackerd (tracker daemon). It process music and video files to create a list of it for media player. It works in background but in case of video it may grow very big (100MB+) and it could take up to 5-7-10 secs to move it to swap flash into internal 32GB eMMC.

So, the solution - kill it via tracker-process

tracker-process -k

But do it after each reboot again.


In addition, there are some "mods" which advices to decrease the frequency of swap-out process in kernel to increase a reactiveness. Yes, it increases reactiveness for small applications but situation comes worse for phone calls... (not sure that you use it).
 

The Following User Says Thank You to egoshin For This Useful Post:
boby is offline boby
2010-08-04 , 05:50
Posts: 19 | Thanked: 2 times | Joined on Jul 2010 @ INDIA
#34
Originally Posted by bfuenmayor View Post
I've been having this same problem too, my phone will light up out of standby when a call in coming in, but the phone part doesn't show up till 5 seconds later, then ring once, then goes to voicemail. i've been missing a ton of calls because of this. Maybe its because I'm on AT&T? I turned off the dual mode to save battery life because I don't have a data plan on my phone, and the N900 doesn't support at&t's 3G bands, thus no need for 3G. But I'll try it nonetheless, and if that doesn't work I'll flash my phone. I'm just glad I'm not the only one having this problem
thank fully am not loosing calls but my phone part appers only after 3 rings i.e like 4 secods.i tried it on airtel and bsnl networks here in india.it works pretty well on dual also but its the only major prob i have.am willing to flash it but worried as if somthing goes wrong....i dnt wana lose this ossom thing.
 
boby is offline boby
2010-08-05 , 05:59
Posts: 19 | Thanked: 2 times | Joined on Jul 2010 @ INDIA
#35
ah thankgod am aldone with flashing,and it worked for me.now my 900 respond imidiate.i thank all u guys who guided me and who stood beside me.
 
chaoscreater is offline chaoscreater
2010-09-01 , 00:38
Posts: 112 | Thanked: 24 times | Joined on May 2010 @ New Zealand
#36
first of all, please LEARN to structure your paragraphs and use proper grammar. It's hard to read what you're trying to say.

2ndly, 5s of ringtime is still a lot, in fact that's more than acceptable. If you want to get back the extra 3s that you lost, making it ring a total of 8s, then's overkill. Unless u react and respond slow to incoming calls, i don't see why u can't pick it up within the first ring....


Aside from that, i don't have any problems with it, but maybe your phone just lags?? Are you on PR 1.2??
 
Galaxy 9 is offline Galaxy 9
2013-10-19 , 11:09
Posts: 1 | Thanked: 0 times | Joined on Oct 2013
#37
Originally Posted by boby View Post
i have been using this wonderfull phone from past 2 months everything is good except...incoming call problem.as its not showing, ringing or detecting an incoming call imediately if some1 calls on n900.its only after 3rings(on callers phn) n900 starts ringing or showing incoming call.its not just on my n900 its on my friends handset too.
due to this am loosing so many calls as it rings only for 5seconds.which is really unacceptable.
can anybody tell me how to solve this problem.if it doesnt get solved i should change it(sadly) badly.
pls pls sombody guide me how to solve this.or is it on every n900




hey guys i have readed your all comments and i too have a prob wid my n900 and tht is when i try to call it shows the screen tht im calling but no voice of ringing bell n if other person trys to call on his phone its showing screen and the bell is also ringing n at tht time nothing happens to my phone not even single bell so guys plzzz help me n i dont know wht is pr 1.2 or whtever u r talking abt n wht it works so help me but i know its a frimware furthur i dont knw how it works
 
Reply
Page 4 of 4 « First 23 4

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 23:58.

Contact Us - Home - Archive - Top