Notices


Reply
Thread Tools
JohnLF's Avatar
Posts: 551 | Thanked: 507 times | Joined on Feb 2010 @ North West England
#391
Originally Posted by geohsia View Post
Hi Nicolai,
Any chance you can increase max ISO to 3200 and max shutterspeed to 1/4000 or 1/8000 thx
Lol, yeah, maybe we can have a 100x zoom function and Image Stabilisation too? How about upping the resolution to say 35mp, that way I can leave my Canon DSLR at home...

SO KEWL lmao
__________________
My websites: -
http://www.lefebvre.org.uk
http://www.lefebvre.ltd.uk
 
Posts: 515 | Thanked: 259 times | Joined on Jan 2010
#392
Originally Posted by zdanee View Post
The device does not have a physical shutter, and I doubt the CMOS can be read out that fast...
It's implemented in FCamera which is why I know it works. I was shooting in daylight at ISO 3200 1/4000 and 1/8000 and it was fine in FCamera. On Camera-UI2 it was blown out and it was not able to freeze motion as would be consistent with a high shutter speed.
 
Posts: 515 | Thanked: 259 times | Joined on Jan 2010
#393
Originally Posted by JohnLF View Post
Lol, yeah, maybe we can have a 100x zoom function and Image Stabilisation too? How about upping the resolution to say 35mp, that way I can leave my Canon DSLR at home...

SO KEWL lmao
Again, check FCamera. If it wasn't possible I wouldn't ask for it.

Photo taken at ISO 3196 shutterspeed 1/950. If it was a brighter day I would have gone faster. FCamera can go faster but the image there wasn't enough light that day.
Attached Images
 

Last edited by geohsia; 2011-05-15 at 16:57.
 
nicolai's Avatar
Posts: 1,637 | Thanked: 4,424 times | Joined on Apr 2009 @ Germany
#394
FCamera uses its own camera driver interface.
I only use what the default driver and camera api
provides.
ISO 1600 is the maximum for this camera driver.
And shutter speed isn't controllable with this camera
api.
 

The Following User Says Thank You to nicolai For This Useful Post:
Posts: 515 | Thanked: 259 times | Joined on Jan 2010
#395
Originally Posted by nicolai View Post
FCamera uses its own camera driver interface.
I only use what the default driver and camera api
provides.
ISO 1600 is the maximum for this camera driver.
And shutter speed isn't controllable with this camera
api.
Aah, got it. Thanks.
 
Posts: 1,042 | Thanked: 430 times | Joined on May 2010
#396
Hi! Just want to confirm something... Has anyone tried disabling the camera flash? I tried setting it to not use the flash(flash off) but still the flash is activated whenever I try taking a shot on a dark area as if it was set to automatic still. So in short does the flash settings on the new camera ui works?
 
hawaii's Avatar
Posts: 1,030 | Thanked: 792 times | Joined on Jun 2009
#397
The LED turns on for autofocus to work.
 
Posts: 515 | Thanked: 259 times | Joined on Jan 2010
#398
Originally Posted by Radicalz38 View Post
Hi! Just want to confirm something... Has anyone tried disabling the camera flash? I tried setting it to not use the flash(flash off) but still the flash is activated whenever I try taking a shot on a dark area as if it was set to automatic still. So in short does the flash settings on the new camera ui works?
I shoot with no flash all the time. Sometimes its a bit quirky but I open /close the camera and usually it's fine after that.
 
ndi's Avatar
Posts: 2,050 | Thanked: 1,425 times | Joined on Dec 2009 @ Bucharest
#399
Mine fires too depending on moon phase and darkness. It does fire for focus, but once focused it still fires either twice in quick succession in low light (fill? delayed?) and fully in darkness. Old camera also did this.
__________________
N900 dead and Nokia no longer replaces them. Thanks for all the fish.

Keep the forums clean: use "Thanks" button instead of the thank you post.
 
Posts: 281 | Thanked: 679 times | Joined on Feb 2010
#400
Of topic (?): Maybe some inspirations for the camera-ui: http://chdk.wikia.com/wiki/CHDK. I like the grid functionality and the example golden ratio grid there: http://chdk.wikia.com/wiki/Grids
 
Reply

Tags
camera-ui, fremantle

Thread Tools

 
Forum Jump


All times are GMT. The time now is 10:47.