Active Topics
-
maemo.org (1)
to Community by sixwheeledbeast - 6 hrs, 38 mins ago -
Old stuff for Nokia 770 (0)
to Nokia 770 by teroyk - 10 hrs, 35 mins ago - more...
 |
|
2011-03-18
, 19:40
|
|
Posts: 4,783 |
Thanked: 1,253 times |
Joined on Aug 2007
@ norway
|
#442
|
Originally Posted by auouymous
Bah, why did i assume it was a ASUI issue. I should have thought of how i have the brightness settings set (max duration brightness, 2 min, to help with reading long websites and such, and a minimum blank time, 2 min as well as i can not set it below the brightness time to have it save as much battery as possible when left idle).
Is your dim timeout 2 minutes? The dim timeout begins when you press the lock button but won't dim until at least 60 seconds after the last blanking pause signal. I could probably read the dim timeout and adjust the message if greater than 60 seconds.
Lock&blank and blank will not override the blanking pause either and result in the same notification.
Wouldn't a long press on the power button shutdown your device?
What is your timeout from dim to blank? Power button will dim the screen if another key is required to unlock, but if your dim->blank timeout was near zero it might cause problems.
If the screen is off and locked then power button requires another key to unlock or none if you prefer the old way, you can change it in the settings. If the screen is locked and has dimmed then power button will blank the screen. It is important that is has dimmed because MCE will dim it after power button has blanked the screen causing it to turn back on.
As for the power button long press, i held it down for a couple of seconds, then on release the screen would light up and give me a "press fullscreen to unlock" message.
big case of
on my part right now. Sorry for the thread noise.
__________________
Be warned, posts are often line of thoughts at highway speeds...
Be warned, posts are often line of thoughts at highway speeds...
 |
|
2011-03-18
, 19:47
|
|
Posts: 2,853 |
Thanked: 968 times |
Joined on Nov 2005
|
#443
|
Originally Posted by auouymous
... but not (quite), it seems, on stock Diablo without rotation with Diablo Turbo but without Community SSU :-)
It will work on stock Diablo without rotation support or on Community SSU or Diablo Turbo.
After posting the previous question I took a careful look at the installed software in both App managers, and then I spotted the difference : 810 has CSSU, 800 did not... My mistake !
After adding the CSSU to the 800 and rebooting, ASUI is back to its normal behaviour... sorry for the corner case :-)
I did spot another niggling detail though (probably nothing to do with ASUI) : on the 800, in Cpanel/Navigation, I can uncheck the standard Maemo battery icon, and check the ASUI one in its place. On the 810 I can't because the Maemo icon is greyed out (and checked), so I'd end up with two. Strange.
__________________
maemo blog
maemo blog
|
|
2011-03-18
, 21:13
|
|
Posts: 875 |
Thanked: 918 times |
Joined on Sep 2010
|
#444
|
Originally Posted by tso
You can edit the dim->blank timeout (/system/osso/dsm/display/display_blank_timeout) with gconf-editor so it would be less than the 2 minute dim timeout, it might work.
As for the power button long press, i held it down for a couple of seconds, then on release the screen would light up and give me a "press fullscreen to unlock" message.
Just need to figure out what bug is causing your screen to re-blank after short pressing power button, since your dim->blank timeout isn't causing it.
Originally Posted by fpp
Had you rebooted the device after installing ASUI? Maybe it didn't properly start and the reboot fixed it, and not the CSSU. But the CSSU is probably good to have installed since it patches various userland apps.
After adding the CSSU to the 800 and rebooting, ASUI is back to its normal behaviour... sorry for the corner case
Originally Posted by fpp
Did you have advanced-power installed on the n800? It seems the battery applet is mandatory and advanced-power probably disabled that. I will have ASUI do the same in next release, in the mean time you can run
I did spot another niggling detail though (probably nothing to do with ASUI) : on the 800, in Cpanel/Navigation, I can uncheck the standard Maemo battery icon, and check the ASUI one in its place. On the 810 I can't because the Maemo icon is greyed out (and checked), so I'd end up with two. Strange.
Code:
sed -i "s:^Mandatory=true$:#Mandatory=true:g" /usr/share/applications/hildon-status-bar/hildon-status-bar-battery.desktop
|
|
2011-03-18
, 21:44
|
|
Posts: 2,853 |
Thanked: 968 times |
Joined on Nov 2005
|
#445
|
Originally Posted by auouymous
It was definitely CSSU that fixed it, as I'd turned the N800 on and off a number of times in between.
Had you rebooted the device after installing ASUI? Maybe it didn't properly start and the reboot fixed it, and not the CSSU. But the CSSU is probably good to have installed since it patches various userland apps.
Did you have advanced-power installed on the n800?
It seems the battery applet is mandatory and advanced-power probably disabled that. I will have ASUI do the same in next release, in the mean time you can run
(code) as root so you can remove the default battery applet.
__________________
maemo blog
maemo blog
|
|
2011-03-19
, 09:03
|
|
Posts: 875 |
Thanked: 918 times |
Joined on Sep 2010
|
#446
|
While adding alarm support I managed to get devlock working properly and have it showing the keypad at boot up. 
I then discovered that the maemo-control-services plugin puts all services at S/K20 causing several of them to die hundreds of times during boot and never start. The alarm service is one of them but moving it to a higher value got it to start.
Could one of you who hasn't used that plugin or tampered with the rc links run ls /etc/rc?.d/ and send me the output?
I then discovered that the maemo-control-services plugin puts all services at S/K20 causing several of them to die hundreds of times during boot and never start. The alarm service is one of them but moving it to a higher value got it to start.
Could one of you who hasn't used that plugin or tampered with the rc links run ls /etc/rc?.d/ and send me the output?
|
|
2011-03-19
, 11:25
|
|
Posts: 1,101 |
Thanked: 1,184 times |
Joined on Aug 2008
@ Spain
|
#447
|
That's why I run from mmc 
This is from a qemu vm running unmodified diablo.
This is from a qemu vm running unmodified diablo.
Code:
Nokia-N800-:/etc/rc1.d# ls K00zzinitdone K20wlancond K01alarmd K21af-startup K01mediaplayer-daemon K22af-services K01metalayer-crawler0 K23x-server K15icd2 K24dsp-init K15tablet-browser-daemon K26esd K16hal K30ke-recv K20af-base-apps K40wide-dhcpv6-client K20btcond K45maemo-launcher K20dbus K45osso-systemui K20gpsdriver K74bluez-utils K20hildon-application-manager K74osso-systemui-early K20hildon-desktop K75multimediad K20hulda K79mce K20libgpsbt K85dnsmasq K20obexsrv K85product-code K20osso-ipv6 Nokia-N800-:/etc/rc2.d# ls K00zzinitdone S54gpsdriver S12fb-progress.sh S54libgpsbt S20dbus S54osso-ipv6 S20hal S56bluez-utils S20osso-applet-display S57btcond S21mce S58wide-dhcpv6-client S21x-server S58wlancond S22af-services S59icd2 S24dsp-init S60af-base-apps S25multimediad S61osso-systemui S26esd S70obexsrv S26osso-systemui-early S99alarmd S30ke-recv S99hulda S41product-code S99mediaplayer-daemon S45maemo-launcher S99metalayer-crawler0 S50af-startup S99tablet-browser-daemon S51hildon-desktop S99ttyusb0 S52hildon-application-manager S99zzinitdone S53dnsmasq Nokia-N800-:/etc/rc3.d# ls K00zzinitdone S53dnsmasq S20dbus S56bluez-utils S20hal S57btcond S21mce S58wide-dhcpv6-client S21x-server S58wlancond S22af-services S59icd2 S24dsp-init S60af-base-apps S25multimediad S61osso-systemui S26esd S70obexsrv S26osso-systemui-early S99alarmd S30ke-recv S99hulda S41product-code S99mediaplayer-daemon S45maemo-launcher S99metalayer-crawler0 S50af-startup S99tablet-browser-daemon S51hildon-desktop S99zzinitdone S52hildon-application-manager Nokia-N800-:/etc/rc4.d# ls K00zzinitdone S53dnsmasq S20dbus S56bluez-utils S20hal S57btcond S21mce S58wide-dhcpv6-client S21x-server S58wlancond S22af-services S59icd2 S24dsp-init S60af-base-apps S25multimediad S61osso-systemui S26esd S70obexsrv S26osso-systemui-early S99alarmd S30ke-recv S99hulda S41product-code S99mediaplayer-daemon S45maemo-launcher S99metalayer-crawler0 S50af-startup S99tablet-browser-daemon S51hildon-desktop S99zzinitdone S52hildon-application-manager Nokia-N800-:/etc/rc5.d# ls K00zzinitdone S20dbus K01mediaplayer-daemon S20hal K15btcond S20osso-applet-display K15icd2 S21mce K15tablet-browser-daemon S21x-server K20af-base-apps S22af-services K20fb-progress.sh S24dsp-init K20gpsdriver S25multimediad K20hildon-application-manager S26esd K20hildon-desktop S26osso-systemui-early K20hulda S41product-code K20libgpsbt S53dnsmasq K20obexsrv S58wide-dhcpv6-client K20osso-ipv6 S61osso-systemui K20wlancond S99alarmd K30ke-recv S99metalayer-crawler0 K45maemo-launcher S99zzinitdone K74bluez-utils
| The Following User Says Thank You to maacruz For This Useful Post: | ||
|
|
2011-03-21
, 02:54
|
|
Posts: 875 |
Thanked: 918 times |
Joined on Sep 2010
|
#448
|
The libxpm4 dependancy is in the Maemo sdk/tools repository so I replaced the install file on the download page to keep the number of installed repos down for anyone who already had that one.
Pressing the power key will dim the screen if a secondary key is required to unlock. Problem is that if dim timeout is equal to blank timeout then the screen skips the dim stage and goes straight to blank. You will need to set the secondary key to none until I release a fix.
Pressing the power key will dim the screen if a secondary key is required to unlock. Problem is that if dim timeout is equal to blank timeout then the screen skips the dim stage and goes straight to blank. You will need to set the secondary key to none until I release a fix.
|
|
2011-03-22
, 20:37
|
|
Posts: 86 |
Thanked: 8 times |
Joined on May 2010
|
#449
|
So I hadn't realized that Canola2 had its own "Remain Lit While Charging" setting. I've now turned that off, but have the system "remains-lit" still set to "while charging." Things seem to be behaving as expected now.
With Canola's setting turned on, I was frequently seeing that the Lock&Blank and Blank would not blank, and also that Lock&Blank would not consistently lock. It seemed that, for instance, after seeing the "an app may have paused blanking" notification and then "screen is locked, will blank in 60 seconds" notification, that screen taps would be recognized. Then, on pressing the power button, a notification "screen and keys active."
With Canola's setting turned on, I was frequently seeing that the Lock&Blank and Blank would not blank, and also that Lock&Blank would not consistently lock. It seemed that, for instance, after seeing the "an app may have paused blanking" notification and then "screen is locked, will blank in 60 seconds" notification, that screen taps would be recognized. Then, on pressing the power button, a notification "screen and keys active."
|
|
2011-03-22
, 23:36
|
|
Posts: 875 |
Thanked: 918 times |
Joined on Sep 2010
|
#450
|
advanced-systemui (0.5.2)
- fix: allow default battery applet to be disabled
- fix: ASUI properly locks the device with MCE
- fix: if blank timeout isn't at least 10 seconds greater than dim timeout then power button will not dim the display if a secondary key is required to unlock
- fix: tapping the battery applet will no longer change it to the solid red battery icon before values from ASUI have been received
- more changes to the flight mode images
- removed cpu percentage from popup clock
- refreshed memory, frequency and temperature before drawing popup clock
- added alarmd, metalayer-crawler and browserd to system services for process viewer
- display names of shell scripts in process viewer
- added gpsdriver_guard to process viewer and GPS service widget
- init.d script and convenience script must now stop SystemUI whenever ASUI is started
- changed runlevel order from SK99 to S61/K45
- added advanced-systemui-early script at S26/K74
- setting to not show clock popup when ASUI is mapped, except for on secure keypad
- setting for minimum time between clock popups
| The Following 2 Users Say Thank You to auouymous For This Useful Post: | ||
 |
| Tags |
| bada blows, bada rox |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
|
All times are GMT. The time now is 02:19.
Lock&blank and blank will not override the blanking pause either and result in the same notification.
What is your timeout from dim to blank? Power button will dim the screen if another key is required to unlock, but if your dim->blank timeout was near zero it might cause problems.
If the screen is off and locked then power button requires another key to unlock or none if you prefer the old way, you can change it in the settings. If the screen is locked and has dimmed then power button will blank the screen. It is important that is has dimmed because MCE will dim it after power button has blanked the screen causing it to turn back on.