Active Topics
-
The N900 is now 15 years old! (8)
to Nokia N900 by whayong - 12 hrs, 57 mins ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 5 days, 9 hrs ago - more...
marduk1015 |
2010-06-15
, 22:25
|
|
Posts: 3 |
Thanked: 0 times |
Joined on Jun 2010
|
#4501
|
When I try to check if ideal is running, it asks for PASSWORD
|
|
2010-06-16
, 02:18
|
|
Posts: 1 |
Thanked: 0 times |
Joined on Jun 2010
|
#4502
|
Originally Posted by jakiman
Due to many requests, here are all the Queen Beecon Widget exports that I use as seen below:
(I have zipped up each widget's export output as a txt file)
http://talk.maemo.org/attachment.php...1&d=1274397770
I have updated my overclocking guide with the link also.
Now to use this, copy the text inside the txt file to the N900 clipboard (can open the file via leafpad etc), then create a new beecon widget, go to settings window, then click Advanced on right, click yes,then go down to the bottom, then click paste in top center, then click import on the right side, click yes. then go out. you will now have imported my exact beecon settings.
For those who get the msg "rootsh is now deprecated....), see following post:
http://talk.maemo.org/showpost.php?p...postcount=3953
Please do note that the 1Ghz widget is using a custom profile.
To get it to work, you will need to run the following from xterminal first and create the modified ideal profile that is clocked up to 1Ghz. (example is using ideal voltage profile)
1. Launch xterminal
2. root
3. kernel-config load ideal
4. kernel-config limits 500 1000
5. kernel-config save ideal_1000
Would you please tell me how to calculate the checksum in your scripts
? I'm new to the coding. By the way, thank you for your overclocking guide and sharing this scripts, it run great on my n900
 |
|
2010-06-16
, 08:15
|
|
Posts: 121 |
Thanked: 100 times |
Joined on Jun 2010
|
#4503
|
Originally Posted by jakiman
The error that you get is because you have rootsh 1.8 installed instead of rootsh 1.5.
1.5 = extras
1.8 = extras-devel
1.8 does not support rootsh command. So use sudo instead.
Instead of:
rootsh /usr/sbin/kernel-config load ideal
Use this instead:
sudo /usr/sbin/kernel-config load ideal
hello jakiman, im tried to use the sudo comand but beecom widget always say me Bad checksum, if i keep it whit rootsh beecom widget acept it whitout problems, but went i want to use the widget this say me that not support the rootsh comand.
what can i do, i tryed a lot of diferents ways, same like you write is this post, whit sudo gainroot... a lot, but becoom widget only acept the rootsh.
i hope you or somebody can help me cuz im becoming crazy,
regards.
|
|
2010-06-16
, 08:25
|
|
Posts: 111 |
Thanked: 27 times |
Joined on Apr 2010
|
#4504
|
Originally Posted by kamiwey
For the command in queen beecon i use:
hello jakiman, im tried to use the sudo comand but beecom widget always say me Bad checksum, if i keep it whit rootsh beecom widget acept it whitout problems, but went i want to use the widget this say me that not support the rootsh comand.
what can i do, i tryed a lot of diferents ways, same like you write is this post, whit sudo gainroot... a lot, but becoom widget only acept the rootsh.
i hope you or somebody can help me cuz im becoming crazy,
regards.
echo kernel-config load ideal | sudo gainroot
try that?
|
|
2010-06-16
, 08:59
|
|
Posts: 121 |
Thanked: 100 times |
Joined on Jun 2010
|
#4505
|
Originally Posted by imacmillan
thank you, im trying also but say the same, bad checksum
For the command in queen beecon i use:
echo kernel-config load ideal | sudo gainroot
try that?
|
|
2010-06-16
, 09:32
|
|
Posts: 111 |
Thanked: 27 times |
Joined on Apr 2010
|
#4506
|
Originally Posted by kamiwey
a quick search suggests that maybe you are editing the file itself instead of using QB's Edit Cmd button?
thank you, im trying also but say the same, bad checksum
Have you tried adding a completely new widgit and then adding a command through the QB user interface?
Or are you importing someone elses file?
No!No!No!Yes! suggests you "Import the beecon first and then change the command from settings with "edit cmd" "
From this thread: http://talk.maemo.org/showthread.php...886#post708886
Might be useful info...
|
|
2010-06-16
, 12:25
|
|
Posts: 209 |
Thanked: 44 times |
Joined on Jan 2010
@ Austria
|
#4507
|
Dear titan
Is it possible to turn off the GUI (Nokia Logo and moving dots) during boot? I want to see what the OS is doing.
Can you make a custom kernel with fb console enabled?
Is it possible to turn off the GUI (Nokia Logo and moving dots) during boot? I want to see what the OS is doing.
Can you make a custom kernel with fb console enabled?
|
|
2010-06-16
, 22:19
|
|
Posts: 277 |
Thanked: 46 times |
Joined on Jan 2010
|
#4508
|
Nokia-N900:~# apt-get install --reinstall kernel kernel-flasher fremantle-203-prReading package lists... Done
Building dependency tree
Reading state information... Done
Package kernel is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package kernel has no installation candidate
At this point a full reflash is clearly an option (and yes everything is backed up, and I've flashed a number of times before, so no big deal) .. but I was intrigued as to what went wrong.
I'm thinking the erroneous removal of mp-fremantle-203-pr was not great -- although kernel couldn't be found before this.
Am I missing a repo? Can someone check if this package is in their repo?
Building dependency tree
Reading state information... Done
Package kernel is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package kernel has no installation candidate
At this point a full reflash is clearly an option (and yes everything is backed up, and I've flashed a number of times before, so no big deal) .. but I was intrigued as to what went wrong.
I'm thinking the erroneous removal of mp-fremantle-203-pr was not great -- although kernel couldn't be found before this.
Am I missing a repo? Can someone check if this package is in their repo?
 |
|
2010-06-18
, 09:24
|
|
Posts: 55 |
Thanked: 14 times |
Joined on Mar 2010
|
#4509
|
Hi! I stumbled at the pf-kernel patch set which includes the BF scheduler and I was surprised what big difference the BFS makes on my intel based notebook.
What do you think - would it make sense to integrate BFS into titans kernel to improve responsiveness or doesn't it make sense on an arm cpu?
What do you think - would it make sense to integrate BFS into titans kernel to improve responsiveness or doesn't it make sense on an arm cpu?
|
|
2010-06-18
, 12:04
|
|
Posts: 946 |
Thanked: 1,650 times |
Joined on Oct 2009
@ Germany
|
#4510
|
Originally Posted by Mr. Incredible
fbcon is very unstable and leads to crashes, shutdown hangs etc.
Dear titan
Is it possible to turn off the GUI (Nokia Logo and moving dots) during boot? I want to see what the OS is doing.
Can you make a custom kernel with fb console enabled?
just install sysklogd and get the messages from the logfile.
the boot screen is scrolling too fast anyway and you cannot scroll up during boot.
Originally Posted by jehan
There is no BFS patch for 2.6.28
Hi! I stumbled at the pf-kernel patch set which includes the BF scheduler and I was surprised what big difference the BFS makes on my intel based notebook.
What do you think - would it make sense to integrate BFS into titans kernel to improve responsiveness or doesn't it make sense on an arm cpu?
| The Following User Says Thank You to titan For This Useful Post: | ||
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
|
All times are GMT. The time now is 14:28.