Originally Posted by flotron

So simlocked n9s can't install Sailfish. Even if you unlock it after contract. Must be factory unlocked

Can anyone confirm this?

Originally Posted by flotron

after using


I still get "Simlock ON: cannot flash unsigned image"

So this is the end of my adventures with Sailfish and n9?

Originally Posted by rainisto

erase-mmc should not be needed as erase-user-data also erases mmc partition, flasher might get confused as you are trying to erase mmc two times in same command so:

flasher -f -F main.bin --erase-user-data=secure -F emmc.bin

And make sure that you dont have devicelock enabled in the harmattan.

Originally Posted by plourde

I have tried to reflash to factory since i messed up and after the moslo kernel was installed since the partition is different I am having issues reflash since there is a mismatch how can i fix this

Partition table mismatch (start=112672768, sum=104480768). You may want to use the no-preserve option or flash an erase image

thank you

Originally Posted by flotron

I'm very sure no device lock.

I get "Simlock ON: cannot flash unsigned image" when i try to:

flasher -a main.bin -k zImage_2.6.32.54-openmode_l2fix --flash-only=kernel -f -R

Originally Posted by rainisto

Then your out of luck, since the only occasion when ""Simlock ON: cannot flash unsigned image" error is supposed to come is:

a) operator sim lock is not unlocked properly

b) end user has set devicelock code for example from default empty string to "12345"(or whatever) and they have forgotten to clear it back to default empty string with --erase-user-data=secure when they have reflashed the default factory image for secure mode.

So if flashing back to normal secure mode with:
"flasher -f -F main.bin -F emmc.bin --no-preserve --erase-user-data=secure" doesn't solve the problem, then you are stuck with Harmattan.

Originally Posted by flotron

No lockcode, is simlock