Originally Posted by Master of Gizmo

I had that installed previously and yes, i noticed that the vpnc package added something to the script. This may have prevented the script from being updated.

Would someone who has updated his machine be so kind to put his
/etc/udhcpc/libicd_network_ipv4.script somewhere so i can compare them?

Originally Posted by chrget

Mine says:

Code:

#!/bin/sh
# Place your script to /etc/maemo-dhcp.d directory so that it gets run.

run-parts -a "$1" /etc/maemo-dhcp.d

Hope this helps,

Chris.

Originally Posted by Master of Gizmo

/etc/resolv.conf doesn't even need to contain anything.

Originally Posted by juaalto

You can either reflash with PR 1.1 and reinstall vpnc or you could try following manual steps. Please report if they work:

1. Install 'rootsh' package
2. Open X Terminal
3. Enter 'sudo gainroot'
4. Enter 'mv /etc/udhcpc/libicd_network_ipv4.script.dpkg-dist /etc/udhcpc/libicd_network_ipv4.script'
5. Create file '/etc/maemo-dhcp.d/60_vpnc'
6. Add the following code in /etc/maemo-dhcp.d/60_vpnc:

Code:

#!/bin/sh -e
if route -n | grep -e "^0\.0\.0\.0" | grep -q tun0; then
    route -n | grep -e "^0\.0\.0\.0" | grep $interface | awk '{print $2}' > /tmp/vpnc_route
    ip=`cat /var/run/vpnc/defaultroute | cut -f3 -d' '`
    if [ -z $ip ]; then
        killall vpnc
    else
        if route -n | grep -e "^0\.0\.0\.0" | grep -q $ip; then
            route delete default $interface
        fi
    fi
fi

7. In X Terminal enter 'chmod +x /etc/maemo-dhcp.d/60_vpnc'
8. Reboot the device

Originally Posted by qwerty12

Yes, it does. The N900 runs udhcpc for a reason.

Mine says "nameserver 127.0.0.1".