Page 6 of 8 « First 45 6 78
Reply
Thread Tools
tvogel is offline tvogel
2010-11-17 , 01:32
Posts: 79 | Thanked: 21 times | Joined on Sep 2007
#51
Originally Posted by atunguyd View Post
The left side of the usb port was too inaccessable to try get a soldering tip in without risking melting the ribon cable going up to the board above the usb port.
It's not too hard to open both metal cages next to the USB port carefully with a needle or very thin screwdriver. Then, the upper board with the lids of the cages glued on will swing away, giving more room for soldering.

I had to open that cage recently, because I needed to rework the eMMC for bad data connection after the phone had dropped.
 
nman is offline nman
2010-11-17 , 18:22
Posts: 124 | Thanked: 105 times | Joined on Jul 2010
#52
Looks like there might be enough space to replace with a full size usb port... now there would be a cool mod.
 
binu_ji is offline binu_ji
2010-11-18 , 05:27
Posts: 30 | Thanked: 16 times | Joined on Nov 2010 @ Nagercoil, India
#53
My usb port gone out and i am trying to solder the connections manually to the PCB. i have done all except the pin4.
Is the pin4(ID) of the USB is necessary for flashing the mobile.
Whats the use of it when the mobile is connected to the PC.
 

The Following User Says Thank You to binu_ji For This Useful Post:
freebeerz is offline freebeerz
2011-03-04 , 11:33
Posts: 12 | Thanked: 1 time | Joined on Feb 2011 @ UK
#54
Hi,

I just bought a second hand N900, the USB port is still in good condition but I am thinking about doing the epoxy method to prevent any damage (I have already filed the tabs on the USB cable)

Is there any feedback from someone who did this a year ago about the long term results of this procedure?

Thanks!
 
zoner's Avatar
zoner is offline zoner
2011-03-04 , 20:02
Posts: 74 | Thanked: 38 times | Joined on Feb 2010
#55
Originally Posted by freebeerz View Post
Is there any feedback from someone who did this a year ago about the long term results of this procedure?
reinforced with epoxy jan 2010 & still working great.
 

The Following 2 Users Say Thank You to zoner For This Useful Post:
cr0c0 is offline cr0c0
2011-03-10 , 07:18
Posts: 147 | Thanked: 228 times | Joined on Feb 2010 @ Toronto, Canada
#56
Originally Posted by freebeerz View Post
Hi,

I just bought a second hand N900, the USB port is still in good condition but I am thinking about doing the epoxy method to prevent any damage (I have already filed the tabs on the USB cable)

Is there any feedback from someone who did this a year ago about the long term results of this procedure?

Thanks!
I've done it a year ago too (and have the pictures to prove it :P ) and it's still holding perfectly. I also filed down the hooks on all my micro USB cables, which undoubtedly helps a lot as well. Mind you, my N900 has been charged or connected to the PC at least once a day, sometimes more.
 

The Following 3 Users Say Thank You to cr0c0 For This Useful Post:
JadeH's Avatar
JadeH is offline JadeH
2011-03-15 , 17:17
Posts: 162 | Thanked: 64 times | Joined on Mar 2011
#57
I recently lost a N900 due to the usb port falling off, I'm going to try this as soon as my new one arrives, because other than the usb port i never had any issues... (and that n900 was going on 1 year+ of heavy use)

Are the tabs on the usb cables the 2 tiny clip things on the underside?
 
lucky88shp is offline lucky88shp
2011-03-15 , 21:50
Posts: 126 | Thanked: 24 times | Joined on Oct 2010
#58
Yeah same questions, are those 2 tiny long clips the tabs u are referring to??
 
freebeerz is offline freebeerz
2011-03-15 , 23:35
Posts: 12 | Thanked: 1 time | Joined on Feb 2011 @ UK
#59
Originally Posted by lucky88shp View Post
Yeah same questions, are those 2 tiny long clips the tabs u are referring to??
Yes they are the two small "hooks" that are clearly visible in this picture:
http://upload.wikimedia.org/wikipedi...B_USB_Plug.jpg

I suppose you could also remove them with small pliers, but filing them is probably cleaner.
 
raaj13 is offline raaj13
2011-03-16 , 02:45
Posts: 404 | Thanked: 186 times | Joined on Oct 2010 @ Dehradun,India
#60
how to make slider smooth again. my slider is very tight now.
It has made scratches on my keyboard both sides
 
Reply
Page 6 of 8 « First 45 6 78

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 08:00.

Contact Us - Home - Archive - Top