Reply
Thread Tools
Posts: 67 | Thanked: 19 times | Joined on Aug 2010 @ Nu1st Street, Iron Triange, Richmond, CA
#51
Originally Posted by martycollinsesq View Post
Bravo! Update to 1.2 from NSU went fine.
Another Bravo for the guide. Gotta back that arse up now cause I had quicktweak on my N9 when I did the update to 1.2; now I need to flash to factory state. Into the deep I go, relatively unafraid, thanks to community support.
__________________
marty collins, esq
all-access law
@martselectsoul
@martycollinsesq
 
Posts: 57 | Thanked: 48 times | Joined on Mar 2012
#52
I Hope someone can help here.

Today my phone went sluggish and I rebooted it, but it got stuck into a reboot loop, tried to revive it with Nokia link with no results.

Now I managed to flash it with my Mac following the instructions in this thread, flashing went fine but the phone is still in the loop, it goes barely to the point where i should enter pin before rebooting...

Any suggestions? Or is it to Nokia Care with me
 
Posts: 245 | Thanked: 915 times | Joined on Feb 2012
#53
Originally Posted by _Routser View Post
I Hope someone can help here.

Today my phone went sluggish and I rebooted it, but it got stuck into a reboot loop, tried to revive it with Nokia link with no results.

Now I managed to flash it with my Mac following the instructions in this thread, flashing went fine but the phone is still in the loop, it goes barely to the point where i should enter pin before rebooting...

Any suggestions? Or is it to Nokia Care with me
What if you try zeroizing it? (remember, this = all data destroyed)
 

The Following User Says Thank You to itsnotabigtruck For This Useful Post:
Posts: 57 | Thanked: 48 times | Joined on Mar 2012
#54
Originally Posted by itsnotabigtruck View Post
What if you try zeroizing it? (remember, this = all data destroyed)
Trying it now, as I am on Mac, did I understand correctly that I can't get the emmc? But the first command line should probably do the trick (if anything does), so i just leave this out?

Code:
flasher -f -F main.bin -F emmc.bin --flash-only=mmc
EDIT: Zeroizing worked! Thank you for this extrmely helpful thread

Now to the tedious process of getting it back the way it was..

Last edited by _Routser; 2012-03-07 at 03:29.
 
lavo's Avatar
Posts: 68 | Thanked: 6 times | Joined on Jan 2007 @ Perth, Australia
#55
Does anyone have an alternative site for the Mac flasher program? Its seems to be borked from the official download site on the first page.
__________________
**
Thankfully ditched the iPhone for some open source goodness
 
Posts: 1 | Thanked: 0 times | Joined on Mar 2012
#56
Hi there,
this is so far the best guide i have found, but I need some little help before I flash my phone
insdie the log files of the firmware my phone version that I get from NaviFirm+:
059L698: N9 RM-696 Country Variant Australia AU Black 16GB V1
Log Files:
simlock_maemo__deB_allowed2_3gstandard_bb5_multi_a sic0.bin
simlock_maemo__deB_allowed2_3gstandard_bb5_multi_a sic1.bin

But I found this 2 .bin files, and I don't know if this will lock the SIM of my phone and then I will be in troubles well I guess.
So if any can tell me something about it, this .bin files can be exclude from the flash installation or they must also be also included in the installation??
Can any buddy help me, I’m so noob
 
Posts: 245 | Thanked: 915 times | Joined on Feb 2012
#57
Originally Posted by ronmakaay View Post
Hi there,
this is so far the best guide i have found, but I need some little help before I flash my phone
insdie the log files of the firmware my phone version that I get from NaviFirm+:
059L698: N9 RM-696 Country Variant Australia AU Black 16GB V1
Log Files:
simlock_maemo__deB_allowed2_3gstandard_bb5_multi_a sic0.bin
simlock_maemo__deB_allowed2_3gstandard_bb5_multi_a sic1.bin

But I found this 2 .bin files, and I don't know if this will lock the SIM of my phone and then I will be in troubles well I guess.
So if any can tell me something about it, this .bin files can be exclude from the flash installation or they must also be also included in the installation??
Can any buddy help me, I’m so noob
They won't lock your phone, but they also aren't needed for flashing. flasher only cares about the two huge .bin files starting with DFL61.
 

The Following User Says Thank You to itsnotabigtruck For This Useful Post:
Posts: 1 | Thanked: 0 times | Joined on Mar 2012
#58
Originally Posted by nicodonte View Post
No problem to flash with a Claro branded N9 from Argentina, no blocked at all, firmware update without any problem.
Sorry my english.

would have trouble doing it to LTA or Global version ?

tnks
 
Posts: 123 | Thanked: 13 times | Joined on Dec 2011 @ Setubal, Portugal
#59
Hey.. I have a
N9 RM-696 Country Variant Sweden SE Black 16Gweden SE Black 16GB
Can i flash it to
RM-696 NDT CENTRAL EUROPE BLACK 16G
?

Im running PR 1.2
The legacys are 339 to 001 respectivly...
Thanks for the help
 
Posts: 245 | Thanked: 915 times | Joined on Feb 2012
#60
Originally Posted by charlysoft View Post
Sorry my english.

would have trouble doing it to LTA or Global version ?

tnks
The LTA version actually is the global version, so go ahead.

Originally Posted by tiiagoFernandez View Post
Hey.. I have a
N9 RM-696 Country Variant Sweden SE Black 16Gweden SE Black 16GB
Can i flash it to
RM-696 NDT CENTRAL EUROPE BLACK 16G
?

Im running PR 1.2
The legacys are 339 to 001 respectivly...
Thanks for the help
The firmware for that variant was actually released this week, but if you want to flash it to 001, that should work too.
 
Reply

Tags
flashing, nokia n9

Thread Tools

 
Forum Jump


All times are GMT. The time now is 22:31.