hi anyone can help me im using PowerKernel v46 and the omap pr1.3 Kernel i installed the h-e-n software and bought the female to female converter...i am trying to connect a kingston data traveler 2gb flash drive with fat32 file system.
I run the device at high speed. nothing happens. some times when i open file manager it says no filesystem found(this is a rarity... most of the times nothing happens at all).
can you suggest what might be going wrong?... any help will be appreciated...

can i connect mouse keyboard printer scanner imean every usb port device to my n900?????????

Yes you can!!!!!!!!!!!!!!!

Hello I have problem with one flash drive. I dont know why...
One flash drive with FAT16 work well. External HDD with NTFS work well but This 4GB flash with FAT32 do not.

I dont know why but kernel do not mount this drive like sda1

Here is Kernel export:

[ 9356.581268] usb 1-1: New USB device found, idVendor=058f, idProduct=6387
[ 9356.581329] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9356.581359] usb 1-1: Product: Mass Storage
[ 9356.581390] usb 1-1: Manufacturer: USB
[ 9356.581420] usb 1-1: SerialNumber: 1F62ABCB
[ 9356.581451] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 9356.581542] hub 1-0:1.0: port 1 enable change, status 00000503
[ 9356.720764] Initializing USB Mass Storage driver...
[ 9356.721160] usb-storage 1-1:1.0: usb_probe_interface
[ 9356.721252] usb-storage 1-1:1.0: usb_probe_interface - got id
[ 9356.724273] scsi0 : SCSI emulation for USB Mass Storage devices
[ 9356.739410] usbcore: registered new interface driver usb-storage
[ 9356.739532] USB Mass Storage support registered.
[ 9356.751098] usb-storage: device found at 2
[ 9356.751129] usb-storage: waiting for device to settle before scanning
[ 9361.752319] usb-storage: device scan complete
[ 9361.753753] scsi 0:0:0:0: Direct-Access USB USB 2.0 Flash 8.07 PQ: 0 ANSI: 2
[ 9361.766571] sd 0:0:0:0: [sda] 7946240 512-byte hardware sectors: (4.06 GB/3.78 GiB)
[ 9361.766876] sd 0:0:0:0: [sda] Write Protect is off
[ 9361.766876] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 9361.766906] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9361.771240] sd 0:0:0:0: [sda] 7946240 512-byte hardware sectors: (4.06 GB/3.78 GiB)
[ 9361.771514] sd 0:0:0:0: [sda] Write Protect is off
[ 9361.771545] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 9361.771575] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9361.771606] sda:
[ 9362.093078] sd 0:0:0:0: [sda] Attached SCSI removable disk

Please take it to problems thread. h-e-n obviously works flawlessly.
See post #9
((nevertheless a hint: it seems it's detecting a superfloppy (sda) instead of proper partition (sda1) ))

thanks
/j

when i connect the wireless 2.4 ghz mouse ((((not bluetooht mouse))) with n900 after few moments its says that unable to connect no file system available any solution plz???

Please take it to problems thread. h-e-n seems to work flawlessly (though without any better data from your side... :-/ ).
See post #9
((nevertheless a hint: it seems a mouse HAS NO filesystem))

thanks
/j

PS: PLZ = PostLeitZahl, and ??? is not a valid regex. I.E. it's much appreciated if you try to not sound like a luser (see http://www.catb.org/~esr/faqs/smart-questions.html)

I am using PowerKernel v46 multibooted with Nitdroid Ginderbread and the omap pr1.3 Kernel i installed the h-e-n software and bought the female to female converter...i am trying to connect a transcend 4gb flash drive with fat32 file system.
I run the device at high speed. nothing happens. some times when i open file manager it says no filesystem found(this is a rarity... most of the times nothing happens at all).
could someone suggest what might be going wrong?... any help will be appreciated...

EDIT: i also tried different speeds... nothing happens

EDIT: Find my Kernel messages attached

@joerg: u asked me to move the post from that problems thread... here it is please help

Sorry this log has truncated head so is mostly useless to analyze what's going on. Please provide full syslog file, at very least starting from before starting h-e-n GUI

I'm about to look into the issue, but so far suggestions from other team members were like "he should use a proper cable - it worked for everybody else". So without full log that shows where problem *starts* not where it finally aborts, it's hard to open up a decent effort for fixing anything there.

many thanks for reporting
/j

i dont have my usb female to female converter with me at the moment.. however i opened up h-e-n and am attaching the kernel messages that came up... hope this gives u all the req. headers.

I am using the stock nokia cable for micro usb to USB(male) conversion.

thank you man for helping me make this work