Page 72 of 158 « First 627071 72 737482 Last »
Reply
Thread Tools
polomarko is offline polomarko
2013-05-02 , 13:54
Posts: 43 | Thanked: 0 times | Joined on Apr 2013
#711
Originally Posted by rswelter View Post
I would not be using the chinese firmware. I only used because I had to. my ph was / is a true chinese version. I only used because the chinese ph has a firmware lock. I would not be using it if I were you as you may complicate matters.

try your cmt flash like this:
>flasher -F youroriginalphmain.bin --flash-only=cmt -f
note the lower case f at the end of the sequence. that made the difference for me.
Just tried it and was the exact same result :-(
 
snowboarder is offline snowboarder
2013-05-02 , 13:55
Posts: 40 | Thanked: 28 times | Joined on Jun 2009
#712
polomarco,

Read my above reply...I edited it...

SB
 
rswelter is offline rswelter
2013-05-02 , 14:00
Posts: 87 | Thanked: 7 times | Joined on Apr 2013
#713
Originally Posted by polomarko View Post
Just tried it and was the exact same result :-(
did you use your orig product code?

too many chefs in the kitchen, I have to go to work anyway, but will check back tonight.
 
polomarko is offline polomarko
2013-05-02 , 14:01
Posts: 43 | Thanked: 0 times | Joined on Apr 2013
#714
Originally Posted by snowboarder View Post
polomarco,

Try what the poster above says...

The only reason I asked is because you posted this earlier:

"OK, i read all the thread and done everything advised. I downloaded and flashed with German version 009, and than did only cmt from the Chinese version but still this is what i got. I feel like I'm hitting a wall here"

If you did truly flash the radio with fw 003 then you're going to have to reflash the radio ONLY with fw 003.

SB
Yes, you are right but when I checked it again after you asked me if I had done the Chinese version I realized that I didn't do cmt flash with the Chinese version but with the version that came with the phone.
Sorry about the confusion!
So should I try to flash only the cmt from the Chinese version you suggested?
 
snowboarder is offline snowboarder
2013-05-02 , 14:01
Posts: 40 | Thanked: 28 times | Joined on Jun 2009
#715
rswelter,

polomarco's original fw is Lativian 1.2 unfortunately...

SB
 
rswelter is offline rswelter
2013-05-02 , 14:05
Posts: 87 | Thanked: 7 times | Joined on Apr 2013
#716
Originally Posted by polomarko View Post
Yes, you are right but when I checked it again after you asked me if I had done the Chinese version I realized that I didn't do cmt flash with the Chinese version but with the version that came with the phone.
Sorry about the confusion!
So should I try to flash only the cmt from the Chinese version you suggested?
I would not do chinese yet
are you trying to upgrade the ph to 1.3?

did you try the -R cmt flash also with original prod code?
Last edited by rswelter; 2013-05-02 at 14:07.
 
snowboarder is offline snowboarder
2013-05-02 , 14:08
Posts: 40 | Thanked: 28 times | Joined on Jun 2009
#717
polomarco,

Hmmm...let me think about this...

SB
 
polomarko is offline polomarko
2013-05-02 , 14:12
Posts: 43 | Thanked: 0 times | Joined on Apr 2013
#718
Originally Posted by rswelter View Post
I would not do chinese yet
are you trying to upgrade the ph to 1.3?
No, i purchased the phone online, and after I got it it worked ok fro some days, and after getting some updates, just went crazy, saying, there is a problem with your SIM, not showing IMEI or WLAN or Bluetooth, versions. Applications started saying: application is not responding, and asking to close it.
So I dont know which was the original version of the phone, because it came installed. I can only suppose that it have been the latest version for the product code on the Sim tray.
 
rswelter is offline rswelter
2013-05-02 , 14:14
Posts: 87 | Thanked: 7 times | Joined on Apr 2013
#719
Originally Posted by snowboarder View Post
polomarco,

Hmmm...let me think about this...

SB
I agree,
note I had revived my ph from death a few times with phoenix by installing the original product code software. if you have phoenix, you may want to consider this and start over?
again I would not use chinese unless I tried EVERYTHING else first.
I will ck back tonight.
 
polomarko is offline polomarko
2013-05-02 , 14:17
Posts: 43 | Thanked: 0 times | Joined on Apr 2013
#720
Originally Posted by rswelter View Post
I agree,
note I had revived my ph from death a few times with phoenix by installing the original product code software. if you have phoenix, you may want to consider this and start over?
again I would not use chinese unless I tried EVERYTHING else first.
I will ck back tonight.
Thank you both very much SB and RSWELTER !!!
Surely that I will try and do everything that is necessary to revive the phone! Thank you! Wish both of you a great time!
I'll be waiting for your advices!
 
Reply
Page 72 of 158 « First 627071 72 737482 Last »

Tags
flashing, nokia n9

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 03:49.

Contact Us - Home - Archive - Top