Page 8 of 16 « First 67 8 910 Last »
Reply
Thread Tools
J4ZZ is offline J4ZZ
2011-04-10 , 14:17
Posts: 539 | Thanked: 518 times | Joined on May 2010 @ nanaurbusiness
#71
Did you try flashing a different kernel in between

That helped me to finally get the emmc flashed...

Basically it's flashing PR1.3 then kernel from PR1.2 then EMMC and finally the PR1.3 kernel again.

Here's a small How to...

First of all you need two firmware images PR1.2 and PR1.3 for example
Code:
• PR1.3 = RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM

• PR1.2 = RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM
PR1.1.1 will work also...

Then you need a matching emmc image (PR1.3_original or a custom image file for bigger apps partition)
Code:
• PR1.3 RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin 

• 5GB Apps 24GB MyDocs:
http://www.mediafire.com/?j6srnaxwr3notaf 

• 8GB Apps 21GB MyDocs:
http://www.mediafire.com/?5o1hkuuwhn8hh1c
1. Flash PR1.3
Code:
flasher-3.5 -F RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f
2. Flash only Kernel of PR1.2
Code:
flasher-3.5 -F RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM.bin --flash-only=kernel -f
3. Flash your EMMC (custom or PR1.3)
Code:
flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f
4. Reflash PR1.3 firmware (see 1.) or try --flash-only=kernel but with the PR1.3 image (see 2.)

:cheers:

..::J4ZZ::..
 

The Following User Says Thank You to J4ZZ For This Useful Post:
youday4u is offline youday4u
2011-04-10 , 16:11
Posts: 29 | Thanked: 1 time | Joined on Dec 2010
#72
thanks a lot buddy ll follow these steps
 
rjneid's Avatar
rjneid is offline rjneid
2011-04-10 , 16:43
Posts: 88 | Thanked: 25 times | Joined on May 2010 @ Beirut, Lebanon
#73
codetracer 10-25-10 , 05:12 AM

How to get N900 flasher to work in Windows 7 64-bit (x64).
Install Flasher 3.5 - http://tablets-dev.nokia.com/maemo-d...-downloads.php
Download libusb-win32-bin-1.2.2.0.zip - http://sourceforge.net/projects/libusb-win32/
Press U while starting N900 and attach USB
Wait for the original driver to install.
Run inf-wizard.exe (bin folder in zip) - Run as Administrator
Press "Next"
Search in list and select "0x0421 - 0x0105 - Nokia N900 (Update Mode)"
Press "Next"
Press "Next"
Save .inf file
Press "Install Now"
Press "Install this driver software anyway" on warning message.
You should get "Installation successful." and press OK.
Check Windows Device Manager for "libusb-win32 devices", expand and verify "Nokia N900 (Update Mode)" can be found.
Now you are ready to run Flasher 3.5 with your parameters.



works like charm ...

confirmed working
 
youday4u is offline youday4u
2011-04-10 , 18:17
Posts: 29 | Thanked: 1 time | Joined on Dec 2010
#74
dude i followed the steps but when it comes to emmc step i get the same problem.i get those five dots (like when it boots) and then stops .usb device not found

i tried in win 7 64 bit..

i will try tomorrow on a xp machine. hope it works
 
cr0c0 is offline cr0c0
2011-04-10 , 18:38
Posts: 147 | Thanked: 228 times | Joined on Feb 2010 @ Toronto, Canada
#75
Originally Posted by youday4u View Post
dude i followed the steps but when it comes to emmc step i get the same problem.i get those five dots (like when it boots) and then stops .usb device not found

i tried in win 7 64 bit..

i will try tomorrow on a xp machine. hope it works
Definitely give it a try on a win XP computer. As I posted on the last page, even win 7 32bit gave me problems.
 
J4ZZ is offline J4ZZ
2011-04-10 , 18:42
Posts: 539 | Thanked: 518 times | Joined on May 2010 @ nanaurbusiness
#76
Try to unplug -> start flasher with --kernel only from 2nd step... when "wait for suitable usb device" -> then connect again with u-key holding.... -> when kernel is flashed successfully -> try emmc again... the device should not reboot between these steps... leave the -R out !

It worked fine this way on a 64bit machine running win7 and latest libusb drivers...

good luck
 
youday4u is offline youday4u
2011-04-10 , 19:01
Posts: 29 | Thanked: 1 time | Joined on Dec 2010
#77
i started from step 2.
but after step 2.i uexecuted step 3 in same window.failed again
 
rjneid's Avatar
rjneid is offline rjneid
2011-04-11 , 17:47
Posts: 88 | Thanked: 25 times | Joined on May 2010 @ Beirut, Lebanon
#78
the process i followed a few failed on me for the first couple of times, then worked just fine, flashed both my N900s (fiasco and emmc) with not problem.

and as j4zz said leave the -R out, it should never reboot in between
__________________
N900
SWEET !!
 
m4r0v3r is offline m4r0v3r
2011-04-11 , 18:42
Posts: 1,746 | Thanked: 1,832 times | Joined on Dec 2010
#79
if its under warrenty try taking it back
 
youday4u is offline youday4u
2011-04-12 , 06:03
Posts: 29 | Thanked: 1 time | Joined on Dec 2010
#80
hi guys,

Finally on a xp machine i first used emcc without R after finishing i unplugged and then executed pr 1.3 USA version and finished it without R..

successfully done .but as i said i need to wait for few days to check out if i get any problems like what happened before..

Thank you all for helping me
Last edited by youday4u; 2011-04-12 at 06:19.
 
Reply
Page 8 of 16 « First 67 8 910 Last »

Tags
stupid windows

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 12:08.

Contact Us - Home - Archive - Top