Page 8 of 16 « First 67 8 910 Last »
Reply
Thread Tools
script.ninja is offline script.ninja
2012-05-07 , 17:53
Posts: 14 | Thanked: 4 times | Joined on Jun 2010
#71
Originally Posted by aironeous View Post
Can somebody spot the screw holes on the Nu mini Iphone case so we can unscrew them and replace with our N9 case? I'm watching the youtube videos and I can't see where the holes are so far.

edit: At 5:34 from the underside on this video http://www.youtube.com/watch?v=1wd5svq8RyY
It looks like it is riveted on with 8 rivets near top and maybe another 8 on bottom.
hmmm Well I'm in machine class. I should be able to do anything. I could stick it in a vise and punch out the rivets maybe - destroying the iphone case then use or drill whatever holes I want.
I'm still just a student but maybe I'll ask teach for advice on this and do it as a project.

edit again: Wait at 2:57 here
http://www.youtube.com/watch?v=Vhgsjd8xyaE
are those 2 black strips tape that hides screw holes?

edit yet again: Or you can go with the TK-421

http://www.ebay.com/itm/ThinkGeek-TK...item3f16b2c3b0

http://www.youtube.com/watch?v=Dac9G0a15Pg

with HUGE keyboard real estate but you're going to have to flip it upside down then swivel the keyboard open.
But wow look at the HUGE FULL keyboard. I think I'm going to try out that one since I have big fingers and hit wrong keys a lot.
TK-421, why aren't you at your post?

TK-421, do you copy?
 

The Following User Says Thank You to script.ninja For This Useful Post:
MINKIN2 is offline MINKIN2
2012-05-07 , 18:11
Posts: 1,326 | Thanked: 1,524 times | Joined on Mar 2010
#72
There is also a similar keyboard buy with a tilt here

Has anyone had any experience with these or can anyone tell how the rear mechanism compares to the slider in the original post?
 
aironeous's Avatar
aironeous is offline aironeous
2012-05-08 , 04:23
Posts: 819 | Thanked: 806 times | Joined on Jun 2009 @ Oxnard, Ca.
#73
Ha ha first attempt just using a lighter, some wire snips and some small screw drivers. I just heated up the tiny screw driver and drove it through the case into the little black base. I totally got the wrong angle. Oh well I have plenty of more cases and I'm glad I tried it out on a color I didn't like. Tomorrow I'll circular file that black base. The N9 is so top heavy like this it would be easy to drop it forward and I don't like this keyboard performance. Keys are not registering and keys are double and triple registering. Too much babysitting just to get something typed out and the whole thing is cheap plastic. Love the keyboard size and layout and button feel though, it's huge and a function button on both sides.





Verdict I'll try the slider keyboard at the start of this thread or maybe another slider but if it performs like this constantly missing keys and double and triple registering keys to the point of babysitting like this one that will be my last try. This one not only makes the N9 a brick/sandwich but there is a black blob sticking out of the top which is where it pivots. It looks like it's parasiting the N9. Oh well, too bad we can't have a huge keyboard like this but super thin and hardwired in and slides out. It was too good to be true. I feel, well.....istupid.
Last edited by aironeous; 2012-05-08 at 05:27.
 

The Following 5 Users Say Thank You to aironeous For This Useful Post:
Dousan's Avatar
Dousan is offline Dousan
2012-05-08 , 05:58
Posts: 1,161 | Thanked: 1,707 times | Joined on Jan 2010 @ Denmark
#74
@aironeous this is simply just funny mate...

I feel, well.....istupid.
Shame it didn't work.

Regards Dousan...
__________________
My Procreate art:
https://folio.procreate.art/dousan

My Søciety6:
http://society6.com/Dousan
 

The Following 3 Users Say Thank You to Dousan For This Useful Post:
Waynder is offline Waynder
2012-06-01 , 21:05
Posts: 191 | Thanked: 63 times | Joined on May 2010 @ Croatia
#75
got it workin... did anybody solve the problen with FN button?
Last edited by Waynder; 2012-06-02 at 01:52.
 
Kabouik is offline Kabouik
2012-06-15 , 15:20
Posts: 1,336 | Thanked: 3,932 times | Joined on Jul 2010 @ Brittany, France
#76
Has anyone tried the NUU K2-1 MiniKey? It looks like an interesting alternative to the Boxwave keyboard buddy case.

I'd like to try a mod too. However, I have absolutely no idea of which one would be the best, in terms of size, keyboard quality and compatibility. Any reviews (on either one of these keyboards)?
 
godofwar424 is offline godofwar424
2012-06-15 , 17:49
Posts: 1,320 | Thanked: 915 times | Joined on Feb 2010
#77
Originally Posted by Kabouik View Post
Has anyone tried the NUU K2-1 MiniKey? It looks like an interesting alternative to the Boxwave keyboard buddy case.

I'd like to try a mod too. However, I have absolutely no idea of which one would be the best, in terms of size, keyboard quality and compatibility. Any reviews (on either one of these keyboards)?
The minikey wont work from the looks of it, it doesnt have a removable device holder and its built too perfectly for the iPhone

I LIE! It should work, there's screws and stuff on the MiniKey Im tempted to just buy it and try!

EDIT: Went and bought one, will post pictures when finished and will let you know how it works! Don't have the hard case yet, so going to use the standard rubber one initially.
__________________
Well Nokia do at least know how to build a decent phone, just apparently don't know how to support it..

N900 Died Replaced with N8, Requested E7, "Accidentally Broke E7", Now rolling with an N9 and im loving it!


My Contributions

N900 Conversations Wiki Page
Last edited by godofwar424; 2012-06-16 at 01:31.
 

The Following 3 Users Say Thank You to godofwar424 For This Useful Post:
marmistrz is offline marmistrz
2012-06-15 , 17:53
Posts: 3,328 | Thanked: 4,476 times | Joined on May 2011 @ Poland
#78
Originally Posted by HtheB View Post
So there I was, thinking how to get my hands on the N950 some time ago... but then I thought: How will other people will get the N950? Everyone should be able to get the N950...!

All this thinking have made me do something about this problem. A little "case-mod" can do miracles

I bought a cheap iPhone bluetooth slide-case, and a cheap N9 case on eBay.

I unscrewed the case to get rid of the iPhone case, to just have the bluetooth keyboard with the slider.

Then, I just made holes in the cheap N9-case and screwed the slider on it.

Turn on the device, pair them and the result: N9 with a keyboard!

The only drawback is that there is no Ctrl button. I hope someone can help on this project to add a ctrl key for this bluetooth keyboard. There is a "menu" button which doesn't do anything on the N9... Maybe we can bind this key to act as a Ctrl key?


I made some pictures on how I did this, I'll upload them today to share this idea with everybody.

Bluetooth Keyboard:
http://www.ebay.com/itm/ws/eBayISAPI...m=290691737517

N9 hardcase:
http://www.ebay.nl/itm/ws/eBayISAPI....m=130589350679

Edit:

Here are the pictures and the YouTube video:
http://www.youtube.com/watch?v=V-9GuzIT8_8

Picture 1:
The bluetooth keyboard itself in it's original state


Picture 2:
Remove the sticker from the case to get to the screws


Picture 3:


Picture 4:
Unscrew the screws


Picture 5:


Picture 6:


Picture 7:
Makes holes on top of the N9 case and place it on the bluetooth keyboard and screw the screws back


Picture 8:
Place the sticker back on top of the N9 case to prevent scratches on your N9


Picture 9:
Result! (This is an early build, that's why it's not perfectly centered in the middel)
This can be our community device
__________________
If you want to support my work, you can donate by PayPal or Flattr

Projects no longer actively developed: here
Last edited by marmistrz; 2013-01-11 at 18:38.
 

The Following User Says Thank You to marmistrz For This Useful Post:
shin2_d is offline shin2_d
2012-06-15 , 18:00
Posts: 19 | Thanked: 16 times | Joined on Jun 2012 @ Mumbai, India
#79
Wow, simple but awesome.

Should i try it out if i get meego device or on my existing nokia n8
 
mrsellout's Avatar
mrsellout is offline mrsellout
2012-06-15 , 18:13
Posts: 889 | Thanked: 2,087 times | Joined on Sep 2010 @ Manchester
#80
A device as beautifully designed as the n9 deserves better than a iphone hand-me-down (not that I'm knocking your fine efforts). Why not design our own case and use a 3d printer to fabricate it?

Building my own 3d printer is my project for the summer, so I'm holding off doing this just yet, but I thought I'd put the idea out there.
 

The Following 2 Users Say Thank You to mrsellout For This Useful Post:
Reply
Page 8 of 16 « First 67 8 910 Last »

Tags
nokia n955

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 14:58.

Contact Us - Home - Archive - Top