Notices
Page 83 of 140 « First 738182 83 848593 Last »
Reply
Thread Tools
sixwheeledbeast is online now sixwheeledbeast
2012-11-08 , 19:59
Posts: 2,290 | Thanked: 4,134 times | Joined on Apr 2010 @ UK
#821
Originally Posted by Copernicus View Post
Yes, I've now got all my protocols defaulting to a 50% duty cycle. A while back, I had the default set at 33%. I'm not sure that either default setting has made a huge impact; and, while I also see recommendations for anything from 25% to 50% in various places, I haven't yet found a protocol that requires a specific duty cycle.

I'm planning on setting the default back to 33%, as that is the LIRC's default as well...
I didn't notice a change when you switched from 33 to 50.

Also if I play with the duty cycle in the new setting with my LG TV, I have to go to the extremes of either end (<15 and >85) before commands are dropped.

Edit:- is your carrier frequency set for all the protocol or are they different for each?
Would ~3Hz out on the carrier cause this?
__________________

Wiki Admin
sixwheeledbeast's wiki
Testing Squad Subscriber
- mcallerx - tenminutecore - FlopSwap - Qnotted - zzztop - Bander - Fight2048 -


Before posting or starting a thread please try this.
Last edited by sixwheeledbeast; 2012-11-08 at 20:03.
 

The Following 2 Users Say Thank You to sixwheeledbeast For This Useful Post:
Copernicus's Avatar
Copernicus is offline Copernicus
2012-11-08 , 20:36
Posts: 1,986 | Thanked: 7,698 times | Joined on Dec 2010 @ Dayton, Ohio
#822
Originally Posted by sixwheeledbeast View Post
Edit:- is your carrier frequency set for all the protocol or are they different for each?
Would ~3Hz out on the carrier cause this?
I set the carrier frequency specifically for each protocol. Unfortunately, frequency data is even less available than command timing data; the LIRC just defaults to 38 kHz for most protocols, and that seems to work fairly well. But the receivers are expecting a specific carrier frequency, and getting closer to that desired frequency will probably provide better results.

By pushing the frequency all the way up to 60 kHz, I've been able to reduce the effective range to my little Samsung TV to maybe 50 centimeters (or a foot and a half). So I know that it has a range effect for at least some devices.

(I would imagine that bad command timings would have a similar effect.)
 

The Following 3 Users Say Thank You to Copernicus For This Useful Post:
cantruchd is offline cantruchd
2012-11-13 , 06:44
Posts: 79 | Thanked: 53 times | Joined on Jul 2010 @ Ho Chi Minh, Viet Nam
#823
Hi, after the new update of Pierogi (with the advance panel and the preferences tab), the macro seems not to work any more(it work if I press the "Run" button in macro panel, but when I press the physical key it does not work).

Maybe I set a setting wrong?
__________________
All about God, love and yoga www.kriyayoga.com
 
vetsin is offline vetsin
2012-11-17 , 15:51
Posts: 535 | Thanked: 598 times | Joined on Apr 2011 @ Republic of the Philippines
#824
Hi Copernicus!
Just wanna thank you for this app.
We just bought a TV this afternoon for my mom and had the opportunity to test Pierogi on different brands. I overheard a customer asking the sales guy what I was using, the sales guy trying to be all-knowing for his buyer said I'm using a "smart remote control".

+1 bragging rights, the N900 made an impression.
 

The Following 5 Users Say Thank You to vetsin For This Useful Post:
Copernicus's Avatar
Copernicus is offline Copernicus
2012-11-17 , 17:18
Posts: 1,986 | Thanked: 7,698 times | Joined on Dec 2010 @ Dayton, Ohio
#825
Originally Posted by cantruchd View Post
Hi, after the new update of Pierogi (with the advance panel and the preferences tab), the macro seems not to work any more(it work if I press the "Run" button in macro panel, but when I press the physical key it does not work).

Maybe I set a setting wrong?
Sorry for the late reply, been away from Pierogi for a while... Ah well, I'm still trying to clean up both my macro system and my keyboard controls. I think the first thing to check out is in the Preferences option in the menu, there is a "Macro Pack with Keyboard Focus" option that you'll probably want to switch to "User Defined Keyboard Macros". Hopefully that will get things working again for a while...
 

The Following 5 Users Say Thank You to Copernicus For This Useful Post:
cantruchd is offline cantruchd
2012-11-22 , 03:29
Posts: 79 | Thanked: 53 times | Joined on Jul 2010 @ Ho Chi Minh, Viet Nam
#826
Originally Posted by Copernicus View Post
Sorry for the late reply, been away from Pierogi for a while... Ah well, I'm still trying to clean up both my macro system and my keyboard controls. I think the first thing to check out is in the Preferences option in the menu, there is a "Macro Pack with Keyboard Focus" option that you'll probably want to switch to "User Defined Keyboard Macros". Hopefully that will get things working again for a while...
I've done as you said and it does not work....
__________________
All about God, love and yoga www.kriyayoga.com
 
nokiabot's Avatar
nokiabot is offline nokiabot
2013-03-07 , 19:44
Posts: 1,974 | Thanked: 1,834 times | Joined on Mar 2013 @ india
#827
Buddy can u make tha thingy such that we can add ir data of diff brands if we can find them? Pls or a possible workaroumd on adding data to it thanx
 
Estel's Avatar
Estel is offline Estel
2013-03-08 , 03:07
Posts: 5,028 | Thanked: 8,613 times | Joined on Mar 2011
#828
Sure, you can add them just now. Look into code, and add new definitions there. Then send patches to Copernicus, he will be endlessly pleased.

Otherwise, you may want to send him definitions you've found and would like to see in pierogi, then ask kindly - just without all this "Plllls!" and other luser habits.

/Estel
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
 

The Following 2 Users Say Thank You to Estel For This Useful Post:
sixwheeledbeast is online now sixwheeledbeast
2013-03-08 , 07:58
Posts: 2,290 | Thanked: 4,134 times | Joined on Apr 2010 @ UK
#829
Originally Posted by nokiabot View Post
Buddy can u make tha thingy such that we can add ir data of diff brands if we can find them? Pls or a possible workaroumd on adding data to it thanx
Add them to the wiki?

http://wiki.maemo.org/Pierogi_Device...eyset_Requests
__________________

Wiki Admin
sixwheeledbeast's wiki
Testing Squad Subscriber
- mcallerx - tenminutecore - FlopSwap - Qnotted - zzztop - Bander - Fight2048 -


Before posting or starting a thread please try this.
 

The Following 4 Users Say Thank You to sixwheeledbeast For This Useful Post:
nokiabot's Avatar
nokiabot is offline nokiabot
2013-03-11 , 06:12
Posts: 1,974 | Thanked: 1,834 times | Joined on Mar 2013 @ india
#830
Busy finding ir data gonna flood
Last edited by nokiabot; 2013-03-22 at 15:01. Reason: Patrolling
 
Reply
Page 83 of 140 « First 738182 83 848593 Last »

Tags
infrared, pasta, remote, remote control

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 17:45.

Contact Us - Home - Archive - Top