Active Topics
-
The N900 is now 15 years old! (9)
to Nokia N900 by Arno_11 - 20 hrs, 10 mins ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 6 days, 8 hrs ago - more...
 |
|
2009-11-25
, 19:06
|
|
Posts: 1,366 |
Thanked: 1,185 times |
Joined on Jan 2006
|
#82
|
Originally Posted by MrGrim
Mr Grim I am inclined to agree with you, but no harm in looking at both. You can see from the /proc/asound/devices there appear to be two mic devices
I seriously don't think this is software. We'll need someone from nokia to confirm, but i think the headset mic and the embedded one use the same hardware from some point on, which implies the same software too. Are there separate controls for headset and embedded mic ?
If they do use the same path, it becomes obvious that it's just faulty hardware
EDIT: could people please start posting serial numbers?
 |
|
2009-11-25
, 19:07
|
|
Posts: 156 |
Thanked: 13 times |
Joined on Oct 2009
@ Nottingham, UK
|
#83
|
Originally Posted by mklass
I need to make a note to do the same next week.
I have just opended mine an played with it for like 10 mins plugged charger in then made a call to test.... it worked fine
BTW you need to change your footer
or not...
Last edited by tanekray; 2009-11-25 at 19:14. Reason: Addition
|
|
2009-11-25
, 19:08
|
|
Posts: 650 |
Thanked: 619 times |
Joined on Nov 2009
|
#84
|
Hi all,
I am no expert in linux but I checked the Summit device's log file it seems to me the log for audio driver is:
[ 2.940551] ASoC version 0.13.2
[ 2.954132] AIC3X Audio Codec 0.2
[ 2.956695] asoc: tlv320aic3x <-> omap-mcbsp-dai-0 mapping ok
[ 2.958221] asoc: Bluetooth codec <-> omap-mcbsp-dai-1 mapping ok
[ 3.010009] input: RX51 (tlv320aic3x) Jack as /class/input/input2
[ 3.034088] ALSA device list:
[ 3.034149] #0: RX51 (tlv320aic3x)
[ EDIT ] A quick google seems to suggest tlv320 is an audio codec.
Maybe someone can check the folder
[ 3.010009] input: RX51 (tlv320aic3x) Jack as /class/input/input2
and see what input2 points to.....
By the way the debounce clock message should not be something to worry about. If my guess right it's just a filter to filter out asynchronous signal on the MMC data bus. Maybe it's not needed so Nokia didn't use it.
I am no expert in linux but I checked the Summit device's log file it seems to me the log for audio driver is:
[ 2.940551] ASoC version 0.13.2
[ 2.954132] AIC3X Audio Codec 0.2
[ 2.956695] asoc: tlv320aic3x <-> omap-mcbsp-dai-0 mapping ok
[ 2.958221] asoc: Bluetooth codec <-> omap-mcbsp-dai-1 mapping ok
[ 3.010009] input: RX51 (tlv320aic3x) Jack as /class/input/input2
[ 3.034088] ALSA device list:
[ 3.034149] #0: RX51 (tlv320aic3x)
[ EDIT ] A quick google seems to suggest tlv320 is an audio codec.
Maybe someone can check the folder
[ 3.010009] input: RX51 (tlv320aic3x) Jack as /class/input/input2
and see what input2 points to.....
By the way the debounce clock message should not be something to worry about. If my guess right it's just a filter to filter out asynchronous signal on the MMC data bus. Maybe it's not needed so Nokia didn't use it.
|
|
2009-11-25
, 19:30
|
|
Posts: 59 |
Thanked: 8 times |
Joined on Nov 2009
|
#85
|
Hi,
Thanks for carrying on the conversation, I had to get some shut eye, was shattered.
Heres the dmesg output :
and also the cat /proc/asound/cards output :
and finally for product batch comparison, the serial number :
Brb, need coffee .........
Thanks for carrying on the conversation, I had to get some shut eye, was shattered.
Heres the dmesg output :
Code:
[ 3.057067] Disabling unused clock "dpll4_m5x2_ck" [ 3.057098] Disabling unused clock "dpll3_m3x2_ck" [ 3.057159] Disabling unused clock "sys_clkout1" [ 3.057525] Bootup reason: pwr_key [ 3.057617] OMAP GPIO switch handler initializing [ 3.060150] slide (GPIO 71) is now open [ 3.060180] proximity (GPIO 89) is now open [ 3.060211] kb_lock (GPIO 113) is now open [ 3.060241] headphone (GPIO 177) is now disconnected [ 3.060272] cam_shutter (GPIO 110) is now closed [ 3.060302] cam_launch (GPIO 69) is now inactive [ 3.060333] cam_focus (GPIO 68) is now inactive [ 3.060363] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 3.072601] omapfb: acx565akm rev 8b LCD detected [ 3.088562] tpa6130a2 2-0060: Headphone amplifier initialized successfully [ 3.135864] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 3.135955] UBIFS: file system size: 254693376 bytes (248724 KiB, 242 MiB, 1974 LEBs) [ 3.136016] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs) [ 3.136077] UBIFS: media format: 4 (latest is 4) [ 3.136108] UBIFS: default compressor: lzo [ 3.136138] UBIFS: reserved for root: 4384586 bytes (4281 KiB) [ 3.136688] VFS: Mounted root (ubifs filesystem). [ 3.136871] Freeing init memory: 144K [ 4.628601] Registered led device: twl4030:vibrator [ 4.809082] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0 [ 4.861602] tsl2563 2-0029: model 7, rev. 0 [ 4.931854] lp5523 2-0032: LP5523 Programmable led chip found [ 5.041442] Linux video capture interface: v2.00 [ 5.111236] I2C driver for Si4713 FM Radio Transmitter [ 5.823547] Bluetooth: Core ver 2.15 [ 5.853881] NET: Registered protocol family 31 [ 5.853942] Bluetooth: HCI device and connection manager initialized [ 5.853973] Bluetooth: HCI socket layer initialized [ 5.903320] hci_h4p hci_h4p: Registering HCI H4P device [ 5.931854] i2c_omap i2c_omap.2: controller timed out [ 5.988677] lp5523 2-0032: got interrupt from led chip [ 5.989257] lp5523 2-0032: interrupt from led chip 4f [ 5.989288] lp5523 2-0032: all engines configured [ 5.989349] lp5523 2-0032: disabling engines [ 5.989959] Registered led device: lp5523:kb1 [ 5.990112] Registered led device: lp5523:kb2 [ 5.990234] Registered led device: lp5523:kb3 [ 5.990386] Registered led device: lp5523:kb4 [ 5.990539] Registered led device: lp5523:b [ 5.990661] Registered led device: lp5523:g [ 5.990814] Registered led device: lp5523:r [ 5.990936] Registered led device: lp5523:kb5 [ 5.991058] Registered led device: lp5523:kb6 [ 6.073791] radio-si4713 2-0063: Detected Si4713 (0x0d) Firmware: 3.0 Patch ID: 00:00 Component: 3.0 Chip Rev.: unknown [ 6.096069] nokia-av nokia-av: accessory detect module initialized [ 6.161590] TSC2005 driver initializing [ 6.162261] input: TSC2005 touchscreen as /class/input/input3 [ 6.173522] mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock [ 6.283935] mmci-omap-hs mmci-omap-hs.1: Failed to get debounce clock [ 6.414489] omap_wdt omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec, nowayout is on [ 6.441986] SSI DRIVER Version 1.1-rc2 [ 6.442535] omap_ssi omap_ssi: SSI Hardware REVISION 1.0 [ 6.545196] phy0: Selected rate control algorithm 'minstrel' [ 6.583190] smc91x: not found (-19). [ 6.590667] wl1251: loaded [ 6.591400] wl1251: initialized [ 6.666809] mmc0: host does not support reading read-only switch. assuming write-enable. [ 6.666900] mmc0: new high speed SDHC card at address 8fe4 [ 6.673217] mmcblk0: mmc0:8fe4 SU16G 14.8 GiB [ 6.673553] mmcblk0: p1 [ 6.900756] mmc1: new high speed MMC card at address 0001 [ 6.916381] mmcblk1: mmc1:0001 MMC32G 29.8 GiB [ 6.916717] mmcblk1: p1 p2 p3 [ 6.967437] CMT speech driver v0.2.0 [ 6.970214] NET: Registered protocol family 35 [ 6.999267] SSI McSAAB PROTOCOL Version: 2.0-rc1 [ 7.286468] dspbridge_init: 412800 bytes @ 80600000 [ 7.367980] omap-iommu omap-iommu.1: isp registered [ 7.531951] omap-iommu omap-iommu.1: isp: version 1.1 [ 7.676818] smia-sensor 2-0010: firmware: requesting smia-sensor-01-022b-04.bin [ 7.701568] smia_reglist_import: meta_reglist version 2009-07-27 [ 7.701660] smia_reglist_import: type 10 w 648 h 488fmt 30314142 ival 100/1502 ptr d0c392a0 [ 7.701660] smia_reglist_import: type 10 w 648 h 488fmt 30314142 ival 100/3003 ptr d0c39228 [ 7.701690] smia_reglist_import: type 1 w 0 h 0 fmt 30314142 ival 100/0 ptr d0c39090 [ 7.701721] smia_reglist_import: type 0 w 0 h 0 fmt 30314142 ival 100/0 ptr d0c39038 [ 7.714477] et8ek8 3-003e: firmware: requesting et8ek8-0002.bin [ 7.739044] smia_reglist_import: meta_reglist version V14 03-June-2008 [ 7.739105] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314442 ival 100/1292 ptr d0c3c1f4 [ 7.739135] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314142 ival 100/399 ptr d0c3c454 [ 7.739166] smia_reglist_import: type 10 w 1296 h 984fmt 30314142 ival 100/501 ptr d0c3c57c [ 7.739166] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/2500 ptr d0c3c614 [ 7.739196] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/3000 ptr d0c3c28c [ 7.739196] smia_reglist_import: type 10 w 864 h 656 fmt 30314142 ival 100/2988 ptr d0c3c324 [ 7.739227] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/499 ptr d0c3c4e4 [ 7.739257] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/2993 ptr d0c3c3bc [ 7.739257] smia_reglist_import: type 1 w 2592 h 1968 fmt 30314142 ival 100/1207 ptr d0c3c04c [ 8.360137] g_file_storage gadget: File-backed Storage Gadget, version: 7 August 2007 [ 8.360229] g_file_storage gadget: Number of LUNs=2 Number of buffers=16 [ 8.360260] musb_hdrc musb_hdrc: MUSB HDRC host driver [ 8.360839] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1 [ 8.361328] usb usb1: configuration #1 chosen from 1 choice [ 8.361663] hub 1-0:1.0: USB hub found [ 8.361755] hub 1-0:1.0: 1 port detected [ 11.699462] McSAAB: ACWAKE DOWN [ 11.699523] McSAAB: ACWAKE UP [ 11.699584] McSAAB: WAKELINES TEST OK [ 15.225830] kjournald starting. Commit interval 1 seconds [ 15.230529] EXT3 FS on mmcblk1p2, internal journal [ 15.230560] EXT3-fs: mounted filesystem with writeback data mode. [ 15.507080] Adding 786424k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:786424k [ 15.951049] Bluetooth: L2CAP ver 2.13 [ 15.951080] Bluetooth: L2CAP socket layer initialized [ 16.061889] Bluetooth: SCO (Voice Link) ver 0.6 [ 16.061920] Bluetooth: SCO socket layer initialized [ 16.069702] hci_h4p hci_h4p: firmware: requesting bcmfw.bin [ 16.696136] Bluetooth: RFCOMM socket layer initialized [ 16.696258] Bluetooth: RFCOMM TTY layer initialized [ 16.697662] Bluetooth: RFCOMM ver 1.11 [ 20.692871] misc iphb: Module registered in 2.6.28-omap1, built Oct 28 2009 15:33:55 [ 38.540069] warning: `dnsmasq' uses 32-bit capabilities (legacy support in use) [ 44.884674] cfg80211: Regulatory domain changed to country: EU [ 44.884704] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 44.884735] (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 44.884765] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 44.884765] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 44.884796] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 44.884796] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 44.884826] (5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 48.673614] gprs0: attached [ 48.759521] SCSI subsystem initialized [ 49.179321] Driver 'sd' needs updating - please use bus_type methods [ 615.510009] slide (GPIO 71) is now closed [ 718.284667] slide (GPIO 71) is now open [ 740.252380] cam_shutter (GPIO 110) is now open [ 860.877441] slide (GPIO 71) is now closed [ 869.867858] musb_hdrc periph: enabled ep1in for bulk IN, maxpacket 512 [ 869.867889] musb_hdrc periph: enabled ep1out for bulk OUT, maxpacket 512 [ 869.867950] g_file_storage gadget: high speed config #1 [ 882.312438] musb_hdrc periph: enabled ep1in for bulk IN, maxpacket 512 [ 882.312469] musb_hdrc periph: enabled ep1out for bulk OUT, maxpacket 512 [ 882.312530] g_file_storage gadget: high speed config #1 [ 1174.478942] slide (GPIO 71) is now open [ 1184.418029] twl4030_keypad twl4030_keypad: Spurious key event 4-2 [ 1184.615020] twl4030_keypad twl4030_keypad: Spurious key event 4-2
Code:
cat /proc/asound/cards 0 [RX51 ]: tlv320aic3x - RX51 RX51 (tlv320aic3x)
Code:
356938030154760
|
|
2009-11-25
, 19:37
|
|
Posts: 891 |
Thanked: 499 times |
Joined on Nov 2009
@ UK
|
#86
|
Originally Posted by mikec
What did you put in terminal to get this?
and here's the output from a good unit. You can see the mics at device 24:[0-0] and 25:[0-1]
0: [ 0] : control
16: [ 0- 0]: digital audio playback
17: [ 0- 1]: digital audio playback
24: [ 0- 0]: digital audio capture
25: [ 0- 1]: digital audio capture
33: : timer
__________________
Follow me on Twitter
Follow me on Twitter
Last edited by Venomrush; 2009-11-25 at 19:41.
|
|
2009-11-25
, 19:41
|
|
Posts: 474 |
Thanked: 283 times |
Joined on Oct 2009
@ Oxford, UK
|
#87
|
Originally Posted by Venomrush
Surely this is a device where draining the battery is inevitable from to time, probably when you're in the middle of an important call
Never drain the battery, ever.
because it's not got that much battery life if you're out using it all day.
|
|
2009-11-25
, 19:43
|
|
Posts: 1,366 |
Thanked: 1,185 times |
Joined on Jan 2006
|
#88
|
Originally Posted by Venomrush
I got one of the guys to : cat /proc/asound/devices
What did you put in terminal to get this?
i dont have a device.
|
|
2009-11-25
, 19:45
|
|
Posts: 474 |
Thanked: 283 times |
Joined on Oct 2009
@ Oxford, UK
|
#89
|
Originally Posted by TA-t3
That's the opposite of what my first Nokia phone's manual said (also using an Li-ion battery). It advised fully charging and discharging for a couple of cycles at the beginning.
It's very bad for the battery to do a deep discharge. If it needs to be charged often, charge it often. Every accidental discharge-till-it-turns-off will reduce the capacity and lifetime of the battery. This is how it is with lithium-ion and lithium-polymer batteries.
Have the battery designs changed to reverse this advice completely?
Also: You said if the battery is fully discharged, it will be impossible to charge it because the N900 cannot boot into charging mode. Where does "accidental discharge-till-it-turns-off" fit into this? Will that brick the device, or that an incomplete discharge which turns it off by hitting a threshold?
Last edited by jjx; 2009-11-25 at 19:48.
|
|
2009-11-25
, 19:45
|
|
Posts: 1,366 |
Thanked: 1,185 times |
Joined on Jan 2006
|
#90
|
Originally Posted by maemoexperts
cheers looks like your sound-chip is being recognised.
Hi,
Thanks for carrying on the conversation, I had to get some shut eye, was shattered.
Heres the dmesg output :
and also the cat /proc/asound/cards output :Code:[ 3.057067] Disabling unused clock "dpll4_m5x2_ck" [ 3.057098] Disabling unused clock "dpll3_m3x2_ck" [ 3.057159] Disabling unused clock "sys_clkout1" [ 3.057525] Bootup reason: pwr_key [ 3.057617] OMAP GPIO switch handler initializing [ 3.060150] slide (GPIO 71) is now open [ 3.060180] proximity (GPIO 89) is now open [ 3.060211] kb_lock (GPIO 113) is now open [ 3.060241] headphone (GPIO 177) is now disconnected [ 3.060272] cam_shutter (GPIO 110) is now closed [ 3.060302] cam_launch (GPIO 69) is now inactive [ 3.060333] cam_focus (GPIO 68) is now inactive [ 3.060363] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 3.072601] omapfb: acx565akm rev 8b LCD detected [ 3.088562] tpa6130a2 2-0060: Headphone amplifier initialized successfully [ 3.135864] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 3.135955] UBIFS: file system size: 254693376 bytes (248724 KiB, 242 MiB, 1974 LEBs) [ 3.136016] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs) [ 3.136077] UBIFS: media format: 4 (latest is 4) [ 3.136108] UBIFS: default compressor: lzo [ 3.136138] UBIFS: reserved for root: 4384586 bytes (4281 KiB) [ 3.136688] VFS: Mounted root (ubifs filesystem). [ 3.136871] Freeing init memory: 144K [ 4.628601] Registered led device: twl4030:vibrator [ 4.809082] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0 [ 4.861602] tsl2563 2-0029: model 7, rev. 0 [ 4.931854] lp5523 2-0032: LP5523 Programmable led chip found [ 5.041442] Linux video capture interface: v2.00 [ 5.111236] I2C driver for Si4713 FM Radio Transmitter [ 5.823547] Bluetooth: Core ver 2.15 [ 5.853881] NET: Registered protocol family 31 [ 5.853942] Bluetooth: HCI device and connection manager initialized [ 5.853973] Bluetooth: HCI socket layer initialized [ 5.903320] hci_h4p hci_h4p: Registering HCI H4P device [ 5.931854] i2c_omap i2c_omap.2: controller timed out [ 5.988677] lp5523 2-0032: got interrupt from led chip [ 5.989257] lp5523 2-0032: interrupt from led chip 4f [ 5.989288] lp5523 2-0032: all engines configured [ 5.989349] lp5523 2-0032: disabling engines [ 5.989959] Registered led device: lp5523:kb1 [ 5.990112] Registered led device: lp5523:kb2 [ 5.990234] Registered led device: lp5523:kb3 [ 5.990386] Registered led device: lp5523:kb4 [ 5.990539] Registered led device: lp5523:b [ 5.990661] Registered led device: lp5523:g [ 5.990814] Registered led device: lp5523:r [ 5.990936] Registered led device: lp5523:kb5 [ 5.991058] Registered led device: lp5523:kb6 [ 6.073791] radio-si4713 2-0063: Detected Si4713 (0x0d) Firmware: 3.0 Patch ID: 00:00 Component: 3.0 Chip Rev.: unknown [ 6.096069] nokia-av nokia-av: accessory detect module initialized [ 6.161590] TSC2005 driver initializing [ 6.162261] input: TSC2005 touchscreen as /class/input/input3 [ 6.173522] mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock [ 6.283935] mmci-omap-hs mmci-omap-hs.1: Failed to get debounce clock [ 6.414489] omap_wdt omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec, nowayout is on [ 6.441986] SSI DRIVER Version 1.1-rc2 [ 6.442535] omap_ssi omap_ssi: SSI Hardware REVISION 1.0 [ 6.545196] phy0: Selected rate control algorithm 'minstrel' [ 6.583190] smc91x: not found (-19). [ 6.590667] wl1251: loaded [ 6.591400] wl1251: initialized [ 6.666809] mmc0: host does not support reading read-only switch. assuming write-enable. [ 6.666900] mmc0: new high speed SDHC card at address 8fe4 [ 6.673217] mmcblk0: mmc0:8fe4 SU16G 14.8 GiB [ 6.673553] mmcblk0: p1 [ 6.900756] mmc1: new high speed MMC card at address 0001 [ 6.916381] mmcblk1: mmc1:0001 MMC32G 29.8 GiB [ 6.916717] mmcblk1: p1 p2 p3 [ 6.967437] CMT speech driver v0.2.0 [ 6.970214] NET: Registered protocol family 35 [ 6.999267] SSI McSAAB PROTOCOL Version: 2.0-rc1 [ 7.286468] dspbridge_init: 412800 bytes @ 80600000 [ 7.367980] omap-iommu omap-iommu.1: isp registered [ 7.531951] omap-iommu omap-iommu.1: isp: version 1.1 [ 7.676818] smia-sensor 2-0010: firmware: requesting smia-sensor-01-022b-04.bin [ 7.701568] smia_reglist_import: meta_reglist version 2009-07-27 [ 7.701660] smia_reglist_import: type 10 w 648 h 488fmt 30314142 ival 100/1502 ptr d0c392a0 [ 7.701660] smia_reglist_import: type 10 w 648 h 488fmt 30314142 ival 100/3003 ptr d0c39228 [ 7.701690] smia_reglist_import: type 1 w 0 h 0 fmt 30314142 ival 100/0 ptr d0c39090 [ 7.701721] smia_reglist_import: type 0 w 0 h 0 fmt 30314142 ival 100/0 ptr d0c39038 [ 7.714477] et8ek8 3-003e: firmware: requesting et8ek8-0002.bin [ 7.739044] smia_reglist_import: meta_reglist version V14 03-June-2008 [ 7.739105] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314442 ival 100/1292 ptr d0c3c1f4 [ 7.739135] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314142 ival 100/399 ptr d0c3c454 [ 7.739166] smia_reglist_import: type 10 w 1296 h 984fmt 30314142 ival 100/501 ptr d0c3c57c [ 7.739166] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/2500 ptr d0c3c614 [ 7.739196] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/3000 ptr d0c3c28c [ 7.739196] smia_reglist_import: type 10 w 864 h 656 fmt 30314142 ival 100/2988 ptr d0c3c324 [ 7.739227] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/499 ptr d0c3c4e4 [ 7.739257] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/2993 ptr d0c3c3bc [ 7.739257] smia_reglist_import: type 1 w 2592 h 1968 fmt 30314142 ival 100/1207 ptr d0c3c04c [ 8.360137] g_file_storage gadget: File-backed Storage Gadget, version: 7 August 2007 [ 8.360229] g_file_storage gadget: Number of LUNs=2 Number of buffers=16 [ 8.360260] musb_hdrc musb_hdrc: MUSB HDRC host driver [ 8.360839] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1 [ 8.361328] usb usb1: configuration #1 chosen from 1 choice [ 8.361663] hub 1-0:1.0: USB hub found [ 8.361755] hub 1-0:1.0: 1 port detected [ 11.699462] McSAAB: ACWAKE DOWN [ 11.699523] McSAAB: ACWAKE UP [ 11.699584] McSAAB: WAKELINES TEST OK [ 15.225830] kjournald starting. Commit interval 1 seconds [ 15.230529] EXT3 FS on mmcblk1p2, internal journal [ 15.230560] EXT3-fs: mounted filesystem with writeback data mode. [ 15.507080] Adding 786424k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:786424k [ 15.951049] Bluetooth: L2CAP ver 2.13 [ 15.951080] Bluetooth: L2CAP socket layer initialized [ 16.061889] Bluetooth: SCO (Voice Link) ver 0.6 [ 16.061920] Bluetooth: SCO socket layer initialized [ 16.069702] hci_h4p hci_h4p: firmware: requesting bcmfw.bin [ 16.696136] Bluetooth: RFCOMM socket layer initialized [ 16.696258] Bluetooth: RFCOMM TTY layer initialized [ 16.697662] Bluetooth: RFCOMM ver 1.11 [ 20.692871] misc iphb: Module registered in 2.6.28-omap1, built Oct 28 2009 15:33:55 [ 38.540069] warning: `dnsmasq' uses 32-bit capabilities (legacy support in use) [ 44.884674] cfg80211: Regulatory domain changed to country: EU [ 44.884704] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 44.884735] (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 44.884765] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 44.884765] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 44.884796] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 44.884796] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 44.884826] (5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 48.673614] gprs0: attached [ 48.759521] SCSI subsystem initialized [ 49.179321] Driver 'sd' needs updating - please use bus_type methods [ 615.510009] slide (GPIO 71) is now closed [ 718.284667] slide (GPIO 71) is now open [ 740.252380] cam_shutter (GPIO 110) is now open [ 860.877441] slide (GPIO 71) is now closed [ 869.867858] musb_hdrc periph: enabled ep1in for bulk IN, maxpacket 512 [ 869.867889] musb_hdrc periph: enabled ep1out for bulk OUT, maxpacket 512 [ 869.867950] g_file_storage gadget: high speed config #1 [ 882.312438] musb_hdrc periph: enabled ep1in for bulk IN, maxpacket 512 [ 882.312469] musb_hdrc periph: enabled ep1out for bulk OUT, maxpacket 512 [ 882.312530] g_file_storage gadget: high speed config #1 [ 1174.478942] slide (GPIO 71) is now open [ 1184.418029] twl4030_keypad twl4030_keypad: Spurious key event 4-2 [ 1184.615020] twl4030_keypad twl4030_keypad: Spurious key event 4-2
and finally for product batch comparison, the serial number :Code:cat /proc/asound/cards 0 [RX51 ]: tlv320aic3x - RX51 RX51 (tlv320aic3x)
Brb, need coffee .........Code:356938030154760
can you do : cat /proc/asound/devices
 |
| Tags |
| audio, broken, dead, doa, fail, failure, lack of quality control, mic, microphone, n900, n900 recall, no audio |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
|
All times are GMT. The time now is 13:52.
0: [ 0] : control
16: [ 0- 0]: digital audio playback
17: [ 0- 1]: digital audio playback
24: [ 0- 0]: digital audio capture
25: [ 0- 1]: digital audio capture
33: : timer