Page 9 of 14 « First 78 9 1011 Last »
Reply
Thread Tools
vi_ is offline vi_
2011-03-03 , 11:44
Posts: 1,680 | Thanked: 3,685 times | Joined on Jan 2011
#81
Originally Posted by udaychaitanya16 View Post
please somebody with a good battery life post the output of powertop here so that people like me will get a chance to further decipher wt is going with our batteries.Thank you.
after several problems, i did yesterday night a full reset.
i flashed the eMMC and the rootfs

i installed all programms, overclocked, cssu, ...

Code:

Nokia-N900:~# powertop
Powertop 1.13.3
status: Unknown job: pmtrackerdaemon
Sleeping for 11 seconds before sampling
Collecting data for 30 seconds
Sample interval was 00m 30s 29606us

C# | Ratio | Avg/dura | Frequency | Ratio
--------+--------+----------+-----------+--------+
C0 | 0.7% | | 1150 MHz | nan% |
C1 | 0.0% | |
C2 | 1.6% | 7.8ms |
C3 | 4.0% | 63.4ms |
C4 | 93.7% | 2343.4ms |

IRQ# | Activity | Type | Name
--------+------------+----------------+---------------------------
56 | 198 | INTC | i2c_omap
37 | 76 | INTC | gp
11 | 50 | INTC | prcm
86 | 35 | INTC | mmc1
57 | 22 | INTC | i2c_omap
21 | 9 | INTC | SGX
12 | 4 | INTC | DMA

PID# | Activity | Name | Function Entry (Expire)
--------+------------+----------------+---------------------------
0 | 23 | <kernel core> | tick_nohz_restart_sched_tick (tick_sched_timer)
2205 | 19 | osso-xterm | schedule_hrtimeout_range (hrtimer_wakeup)
0 | 19 | <kernel core> | hrtimer_start (tick_sched_timer)
38 | 16D| awk | cpufreq_governor_dbs (delayed_work_timer_fn)
600 | 7 | mmcqd | schedule_timeout (process_timeout)
1018 | 4 | Xorg | queue_delayed_work (delayed_work_timer_fn)
897 | 4 | bme_RX-51 | sys_timer_settime (posix_timer_fn)
986 | 3 | sgx_perf | queue_delayed_work (delayed_work_timer_fn)
600 | 3 | mmcqd | queue_delayed_work (delayed_work_timer_fn)
678 | 3 | dsme | do_nanosleep (hrtimer_wakeup)
678 | 3 | dsme | __enqueue_rt_entity (sched_rt_period_timer)
1 | 3D| <kernel core> | queue_delayed_work (delayed_work_timer_fn)
1018 | 2 | Xorg | hrtimer_start (it_real_fn)
897 | 2 | bme_RX-51 | sys_timer_settime (posix_timer_fn)
897 | 2 | bme_RX-51 | do_nanosleep (hrtimer_wakeup)
704 | 2D|<kernel module> | queue_delayed_work (delayed_work_timer_fn)
897 | 2 | bme_RX-51 | schedule_timeout (process_timeout)
30 | 1 | mount | setup_wb_timer (wb_timer_fn)
14 | 1 | pdflush | blk_plug_device (blk_unplug_timeout)
600 | 1 | mmcqd | schedule_timeout (process_timeout)
1 | 1 | <kernel core> | inet_initpeers (peer_check_expire)
0 | 1 | <kernel core> | queue_delayed_work (delayed_work_timer_fn)
2225 | 1 | powertop | do_nanosleep (hrtimer_wakeup)

Power domain activity breakdown
Domain | % of time spent in states
--------+---------+---------+---------+---------+----------
usbhost |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| nowOFF)
sgx |OFF: 97%|RET: 0%|INA: 0%| ON: 2%| nowOFF)
per |OFF: 97%|RET: 1%|INA: 0%| ON: 0%| nowON)
dss |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| nowOFF)
cam |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| nowOFF)
core |OFF: 93%|RET: 2%|INA: 0%| ON: 3%| nowON)
neon |OFF: 93%|RET: 4%|INA: 1%| ON: 0%| nowON)
mpu |OFF: 93%|RET: 4%|INA: 1%| ON: 0%| nowON)
iva2 |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| nowOFF)

Clock activity breakdown at end of period
Domain | Active clocks
--------+---------------+---------------+------------------
core | SDRC | HSOTGUSB_IDLE | OMAPCTRL
| MAILBOXES |
wkup | GPT1 | 32KSYNC | GPIO1
| WDT1 |
ckgen | CORE | PERI | 96M
| 48M | 12M | 54M
| EMU_CORE |
per | GPIO2 | GPIO3 | GPIO4
| GPIO5 | GPIO6 |

Total wakeups 517, 17.2/s | IRQ 394, 13.1/s | Timers 123, 4.1/s
HW wakeups 50, 1.7/s | Real gp_timers expired 76, 2.5/s

cheers
This is an ideal powertop output. Bear in mind though that this is in offline mode. When connected to the GSM network you can probably expect around 700-800 wakeups over the 30 second period.
__________________
N900: One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.
 

The Following User Says Thank You to vi_ For This Useful Post:
vi_ is offline vi_
2011-03-03 , 11:46
Posts: 1,680 | Thanked: 3,685 times | Joined on Jan 2011
#82
Originally Posted by bman View Post
i reflashed my phone recently and slowly started adding apps back on
and watching 2 see if any cause high cpu usgae when idle as i had that problem b4
i got to flash light extra hexahop and kanban and got high cpu usage so uninstalled kanban and hexahop and still had high cpu so uninstalled flash light extra and it stopped
i then installed flash light extra gtk version and cpu looked fine for a few hrs so installed hexahop and kanban and then got high cpu usage again so uninstalled both of them again and was still high cpu usage so uninstalled flash light extra gtk aswell and still having high cpu usage when the phone is idle
yet b4 i installed those apps it was running perfect not using any cpu usage unless i unlocked it and used it
now over night its draining the bttery real fast and battery graph is showing steady cpu usage while it should be doing nothing ??
is there settings left behind that can cause this?


Code:
home/user # powertop
Powertop 1.13.3
status: Unknown job: pmtrackerdaemon
Sleeping for 11 seconds before sampling
Collecting data for 30 seconds
Sample interval was 30m 30s 19867us

C#      | Ratio  | Avg/dura | Frequency | Ratio
--------+--------+----------+-----------+--------+
     C0 |  98.5% |          |  1150 MHz |   nan% |
     C1 |   0.0% |    0.4ms | 
     C2 |   0.1% |    8.6ms | 
     C3 |   0.4% |  164.6ms | 
     C4 |   1.1% |  922.5ms | 

IRQ#    | Activity   | Type           | Name
--------+------------+----------------+---------------------------
     37 |        442 |           INTC | gp
     56 |        236 |           INTC | i2c_omap
     11 |        170 |           INTC | prcm
     86 |         89 |           INTC | mmc1
     57 |         30 |           INTC | i2c_omap
     12 |         24 |           INTC | DMA
    225 |         14 |           GPIO | omap2-onenand
     21 |          9 |           INTC | SGX

PID#    | Activity   | Name           | Function Entry (Expire)
--------+------------+----------------+---------------------------
      0 |        364 |  <kernel core> | tick_nohz_restart_sched_tick (tick_sched_timer)
     38 |         47D|            awk | cpufreq_governor_dbs (delayed_work_timer_fn)
      0 |         22 |  <kernel core> | hrtimer_start (tick_sched_timer)
   3374 |         19 |     osso-xterm | schedule_hrtimeout_range (hrtimer_wakeup)
    668 |         19 |           dsme | __enqueue_rt_entity (sched_rt_period_timer)
    581 |         17 |          mmcqd | schedule_timeout (process_timeout)
    707 |          7 |      bme_RX-51 | sys_timer_settime (posix_timer_fn)
    581 |          5 |          mmcqd | queue_delayed_work (delayed_work_timer_fn)
   1008 |          3 |           Xorg | queue_delayed_work (delayed_work_timer_fn)
    707 |          3 |      bme_RX-51 | schedule_timeout (process_timeout)
    962 |          2 |       sgx_perf | queue_delayed_work (delayed_work_timer_fn)
      1 |          2D|  <kernel core> | queue_delayed_work (delayed_work_timer_fn)
    707 |          2 |      bme_RX-51 | sys_timer_settime (posix_timer_fn)
    707 |          2 |      bme_RX-51 | do_nanosleep (hrtimer_wakeup)
   1246 |          2 |        signond | futex_wait (hrtimer_wakeup)
   1352 |          2 |  BatteryGraphd | start_this_handle (commit_timeout)
    668 |          2 |           dsme | do_nanosleep (hrtimer_wakeup)
     30 |          2 |          mount | setup_wb_timer (wb_timer_fn)
   3565 |          1 |          sleep | do_nanosleep (hrtimer_wakeup)
   1246 |          1 |        signond | schedule_hrtimeout_range (hrtimer_wakeup)
   3579 |          1 |          sleep | do_nanosleep (hrtimer_wakeup)
   3593 |          1 |          sleep | do_nanosleep (hrtimer_wakeup)
   1352 |          1 |  BatteryGraphd | schedule_hrtimeout_range (hrtimer_wakeup)
   3607 |          1 |          sleep | do_nanosleep (hrtimer_wakeup)
   3621 |          1 |          sleep | do_nanosleep (hrtimer_wakeup)
   3635 |          1 |          sleep | do_nanosleep (hrtimer_wakeup)
   1352 |          1 |  BatteryGraphd | ubifs_wbuf_write_nolock (wbuf_timer_callback_nolock)
   3649 |          1 |          sleep | do_nanosleep (hrtimer_wakeup)
    693 |          1D|<kernel module> | queue_delayed_work (delayed_work_timer_fn)
   3663 |          1 |          sleep | do_nanosleep (hrtimer_wakeup)
   3677 |          1 |          sleep | do_nanosleep (hrtimer_wakeup)
      1 |          1 |  <kernel core> | inet_initpeers (peer_check_expire)
   3691 |          1 |          sleep | do_nanosleep (hrtimer_wakeup)
    934 |          1 |            mce | schedule_hrtimeout_range (hrtimer_wakeup)
   2307 |          1 |       browserd | futex_wait (hrtimer_wakeup)
   3705 |          1 |          sleep | do_nanosleep (hrtimer_wakeup)
   3719 |          1 |          sleep | do_nanosleep (hrtimer_wakeup)
   3733 |          1 |          sleep | do_nanosleep (hrtimer_wakeup)
   1032 |          1 | hald-addon-bme | schedule_hrtimeout_range (hrtimer_wakeup)
   3479 |          1 |       powertop | do_nanosleep (hrtimer_wakeup)

Power domain activity breakdown
Domain  | % of time spent in states
--------+---------+---------+---------+---------+----------
usbhost |OFF: 100%|RET:   0%|INA:   0%| ON:   0%| now:(OFF)
    sgx |OFF:  97%|RET:   0%|INA:   0%| ON:   2%| now:(OFF)
    per |OFF:  86%|RET:   5%|INA:   0%| ON:   7%| now:(ON)
    dss |OFF: 100%|RET:   0%|INA:   0%| ON:   0%| now:(OFF)
    cam |OFF: 100%|RET:   0%|INA:   0%| ON:   0%| now:(OFF)
   core |OFF:  64%|RET:  20%|INA:   1%| ON:  12%| now:(ON)
   neon |OFF:  64%|RET:  22%|INA:   5%| ON:   7%| now:(ON)
    mpu |OFF:  64%|RET:  22%|INA:   5%| ON:   7%| now:(ON)
   iva2 |OFF: 100%|RET:   0%|INA:   0%| ON:   0%| now:(OFF)

Clock activity breakdown at end of period
Domain  | Active clocks
--------+---------------+---------------+------------------
   core |          SDRC | HSOTGUSB_IDLE |      OMAPCTRL 
        |     MAILBOXES |
   wkup |          GPT1 |       32KSYNC |         GPIO1 
        |          WDT1 |
  ckgen |          CORE |          PERI |           96M 
        |           48M |           12M |           54M 
        |      EMU_CORE |
    per |         GPIO2 |         GPIO3 |         GPIO4 
        |         GPIO5 |         GPIO6 |

Total wakeups  1558,  51.9/s | IRQ 1014,  33.8/s | Timers  544,  18.1/s
HW wakeups      170,   5.7/s |     Real gp_timers expired  186,   6.2/s
Do the procedure as detailed earlier in this thread and come back. Then we can talk.
__________________
N900: One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.
 
bman is offline bman
2011-03-04 , 22:44
Posts: 122 | Thanked: 17 times | Joined on Jun 2010
#83
i did follow your procedure
offline mode
battery out
keep in offline mode
wait 4 mins
load xterm n power top
run and lock screen
wait 50 sec
then copied n pasted??

after posting this i finished reading the thread and saw about flashlight extra doesnt uninstall all settings so done that rebooted and is now working good again
 

The Following 2 Users Say Thank You to bman For This Useful Post:
udaychaitanya16 is offline udaychaitanya16
2011-03-05 , 12:31
Posts: 212 | Thanked: 66 times | Joined on May 2010 @ India
#84
@vi_ This is the output after exactly following the procedure specified by you.I am on kernel version 46.I have two homescreens.No flashlight.Disabled the OM weather widget before taking this.I have been having horrible battery life like 9 hrs max.I never complained though.please help me find out the culprit. Powertop 1.13.3
status: Unknown job: pmtrackerdaemon
Sleeping for 11 seconds before sampling
Collecting data for 30 seconds
Sample interval was 30m 30s 28625us

C# | Ratio | Avg/dura | Frequency | Ratio
--------+--------+----------+-----------+--------+
C0 | 98.4% | | 1150 MHz | nan% |
C1 | 0.0% | 0.8ms |
C2 | 0.1% | 14.6ms |
C3 | 0.2% | 56.2ms |
C4 | 1.3% | 698.0ms |

IRQ# | Activity | Type | Name
--------+------------+----------------+---------------------------
56 | 432 | INTC | i2c_omap
86 | 267 | INTC | mmc1
12 | 179 | INTC | DMA
37 | 98 | INTC | gp
11 | 66 | INTC | prcm
57 | 24 | INTC | i2c_omap
21 | 9 | INTC | SGX
225 | 1 | GPIO | omap2-onenand

PID# | Activity | Name | Function Entry (Expire)
--------+------------+----------------+---------------------------
0 | 41 | <kernel core> | tick_nohz_restart_sched_tick (tick_sched_timer)
38 | 25D| awk | cpufreq_governor_dbs (delayed_work_timer_fn)
0 | 20 | <kernel core> | hrtimer_start (tick_sched_timer)
1548 | 19 | osso-xterm | schedule_hrtimeout_range (hrtimer_wakeup)
584 | 13 | mmcqd | queue_delayed_work (delayed_work_timer_fn)
706 | 6 | bme_RX-51 | sys_timer_settime (posix_timer_fn)
844 | 4 | Xorg | queue_delayed_work (delayed_work_timer_fn)
803 | 3 | sgx_perf | queue_delayed_work (delayed_work_timer_fn)
30 | 3 | mount | setup_wb_timer (wb_timer_fn)
1533 | 2 | pdflush | blk_plug_device (blk_unplug_timeout)
771 | 2 | mce | schedule_hrtimeout_range (hrtimer_wakeup)
666 | 2 | dsme | do_nanosleep (hrtimer_wakeup)
666 | 2 | dsme | __enqueue_rt_entity (sched_rt_period_timer)
706 | 2 | bme_RX-51 | sys_timer_settime (posix_timer_fn)
706 | 2 | bme_RX-51 | do_nanosleep (hrtimer_wakeup)
706 | 2 | bme_RX-51 | schedule_timeout (process_timeout)
695 | 2D|<kernel module> | queue_delayed_work (delayed_work_timer_fn)
1 | 2D| <kernel core> | queue_delayed_work (delayed_work_timer_fn)
844 | 1 | Xorg | hrtimer_start (it_real_fn)
1323 | 1 |mafw-dbus-wrapp | queue_delayed_work (delayed_work_timer_fn)
1502 | 1 | browserd | futex_wait (hrtimer_wakeup)
1441 | 1 |tracker-indexer | schedule_hrtimeout_range (hrtimer_wakeup)
1441 | 1 |tracker-indexer | journal_get_write_access (commit_timeout)
1533 | 1 | pdflush | journal_get_write_access (commit_timeout)
1554 | 1 | powertop | do_nanosleep (hrtimer_wakeup)

Power domain activity breakdown
Domain | % of time spent in states
--------+---------+---------+---------+---------+----------
usbhost |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| nowOFF)
sgx |OFF: 97%|RET: 0%|INA: 0%| ON: 2%| nowOFF)
per |OFF: 86%|RET: 12%|INA: 0%| ON: 1%| nowON)
dss |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| nowOFF)
cam |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| nowOFF)
core |OFF: 79%|RET: 5%|INA: 0%| ON: 15%| nowON)
neon |OFF: 81%|RET: 10%|INA: 7%| ON: 1%| nowON)
mpu |OFF: 81%|RET: 10%|INA: 7%| ON: 1%| nowON)
iva2 |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| nowOFF)

Clock activity breakdown at end of period
Domain | Active clocks
--------+---------------+---------------+------------------
core | SDRC | HSOTGUSB_IDLE | OMAPCTRL
| MAILBOXES |
wkup | GPT1 | 32KSYNC | GPIO1
| WDT1 |
ckgen | CORE | PERI | 96M
| 48M | 12M | 54M
| EMU_CORE |
per | GPIO2 | GPIO3 | GPIO4
| GPIO5 | GPIO6 |

Total wakeups 1235, 41.2/s | IRQ 1076, 35.9/s | Timers 159, 5.3/s
HW wakeups 66, 2.2/s | Real gp_timers expired 98, 3.3/s
cheers.
 
zimon is offline zimon
2011-03-05 , 14:24
Posts: 1,341 | Thanked: 708 times | Joined on Feb 2010
#85
If you enclose copy+paste from terminal, please use CODE-tags, like below:

Originally Posted by udaychaitanya16 View Post
@vi_ This is the output after exactly following the procedure specified by you.I am on kernel version 46.I have two homescreens.No flashlight.Disabled the OM weather widget before taking this.I have been having horrible battery life like 9 hrs max.I never complained though.please help me find out the culprit.

Code:
Powertop 1.13.3
status: Unknown job: pmtrackerdaemon
Sleeping for 11 seconds before sampling
Collecting data for 30 seconds
Sample interval was 30m 30s 28625us

C#      | Ratio  | Avg/dura | Frequency | Ratio
--------+--------+----------+-----------+--------+
     C0 |  98.4% |          |  1150 MHz |   nan% |
     C1 |   0.0% |    0.8ms | 
     C2 |   0.1% |   14.6ms | 
     C3 |   0.2% |   56.2ms | 
     C4 |   1.3% |  698.0ms | 

IRQ#    | Activity   | Type           | Name
--------+------------+----------------+---------------------------
     56 |        432 |           INTC | i2c_omap
     86 |        267 |           INTC | mmc1
     12 |        179 |           INTC | DMA
     37 |         98 |           INTC | gp
     11 |         66 |           INTC | prcm
     57 |         24 |           INTC | i2c_omap
     21 |          9 |           INTC | SGX
    225 |          1 |           GPIO | omap2-onenand

PID#    | Activity   | Name           | Function Entry (Expire)
--------+------------+----------------+---------------------------
      0 |         41 |  <kernel core> | tick_nohz_restart_sched_tick (tick_sched_timer)
     38 |         25D|            awk | cpufreq_governor_dbs (delayed_work_timer_fn)
      0 |         20 |  <kernel core> | hrtimer_start (tick_sched_timer)
   1548 |         19 |     osso-xterm | schedule_hrtimeout_range (hrtimer_wakeup)
    584 |         13 |          mmcqd | queue_delayed_work (delayed_work_timer_fn)
    706 |          6 |      bme_RX-51 | sys_timer_settime (posix_timer_fn)
    844 |          4 |           Xorg | queue_delayed_work (delayed_work_timer_fn)
    803 |          3 |       sgx_perf | queue_delayed_work (delayed_work_timer_fn)
     30 |          3 |          mount | setup_wb_timer (wb_timer_fn)
   1533 |          2 |        pdflush | blk_plug_device (blk_unplug_timeout)
    771 |          2 |            mce | schedule_hrtimeout_range (hrtimer_wakeup)
    666 |          2 |           dsme | do_nanosleep (hrtimer_wakeup)
    666 |          2 |           dsme | __enqueue_rt_entity (sched_rt_period_timer)
    706 |          2 |      bme_RX-51 | sys_timer_settime (posix_timer_fn)
    706 |          2 |      bme_RX-51 | do_nanosleep (hrtimer_wakeup)
    706 |          2 |      bme_RX-51 | schedule_timeout (process_timeout)
    695 |          2D|<kernel module> | queue_delayed_work (delayed_work_timer_fn)
      1 |          2D|  <kernel core> | queue_delayed_work (delayed_work_timer_fn)
    844 |          1 |           Xorg | hrtimer_start (it_real_fn)
   1323 |          1 |mafw-dbus-wrapp | queue_delayed_work (delayed_work_timer_fn)
   1502 |          1 |       browserd | futex_wait (hrtimer_wakeup)
   1441 |          1 |tracker-indexer | schedule_hrtimeout_range (hrtimer_wakeup)
   1441 |          1 |tracker-indexer | journal_get_write_access (commit_timeout)
   1533 |          1 |        pdflush | journal_get_write_access (commit_timeout)
   1554 |          1 |       powertop | do_nanosleep (hrtimer_wakeup)

Power domain activity breakdown
Domain  | % of time spent in states
--------+---------+---------+---------+---------+----------
usbhost |OFF: 100%|RET:   0%|INA:   0%| ON:   0%| now:(OFF)
    sgx |OFF:  97%|RET:   0%|INA:   0%| ON:   2%| now:(OFF)
    per |OFF:  86%|RET:  12%|INA:   0%| ON:   1%| now:(ON)
    dss |OFF: 100%|RET:   0%|INA:   0%| ON:   0%| now:(OFF)
    cam |OFF: 100%|RET:   0%|INA:   0%| ON:   0%| now:(OFF)
   core |OFF:  79%|RET:   5%|INA:   0%| ON:  15%| now:(ON)
   neon |OFF:  81%|RET:  10%|INA:   7%| ON:   1%| now:(ON)
    mpu |OFF:  81%|RET:  10%|INA:   7%| ON:   1%| now:(ON)
   iva2 |OFF: 100%|RET:   0%|INA:   0%| ON:   0%| now:(OFF)

Clock activity breakdown at end of period
Domain  | Active clocks
--------+---------------+---------------+------------------
   core |          SDRC | HSOTGUSB_IDLE |      OMAPCTRL 
        |     MAILBOXES |
   wkup |          GPT1 |       32KSYNC |         GPIO1 
        |          WDT1 |
  ckgen |          CORE |          PERI |           96M 
        |           48M |           12M |           54M 
        |      EMU_CORE |
    per |         GPIO2 |         GPIO3 |         GPIO4 
        |         GPIO5 |         GPIO6 |

Total wakeups  1235,  41.2/s | IRQ 1076,  35.9/s | Timers  159,   5.3/s
HW wakeups       66,   2.2/s |     Real gp_timers expired   98,   3.3/s

cheers.
 

The Following User Says Thank You to zimon For This Useful Post:
udaychaitanya16 is offline udaychaitanya16
2011-03-05 , 17:23
Posts: 212 | Thanked: 66 times | Joined on May 2010 @ India
#86
@zimon
i googled for how to code-tag just like you said but got nothing.i copied from terminal and i pasted it to notes in my device and from there posted here.please give an idea.
regards
 
devi01 is offline devi01
2011-03-05 , 18:00
Posts: 9 | Thanked: 0 times | Joined on Jan 2011
#87
Try the new battery workwd fine ,see the links my thread:
http://www.mugen-power-batteries.com.../view/id/1357/
 
zimon is offline zimon
2011-03-05 , 18:08
Posts: 1,341 | Thanked: 708 times | Joined on Feb 2010
#88
If you click "quote&Reply" on my previous post, you will see how CODE-tags are used. Also if you use [Go Advanced] there is "#"-button which will bring the CODE-start and -end tags.

In your powertop output it shows your CPU is active ("98.4%") almost whole 30s time. So something is running. You could try to see with top or with htop what process is running in the background.
 

The Following User Says Thank You to zimon For This Useful Post:
udaychaitanya16 is offline udaychaitanya16
2011-03-06 , 18:13
Posts: 212 | Thanked: 66 times | Joined on May 2010 @ India
#89
@Thank for your kind answer.As of now i have flashed it.using very limited apps like
1.queen beecon
2.f-aircrack
3.pen pen ,conboy
4.vnc viewer
5.auto dis connect,simple brightness app.
Now i have put into re use -smartreflex
since 7.45 pm to 11.45 pm phone lost 4 percent of charging till now.at present happy with that.will see what happens.
 
bman is offline bman
2011-03-10 , 09:51
Posts: 122 | Thanked: 17 times | Joined on Jun 2010
#90
install battery graph and install 5 or so apps every 2 days or so
in your idle time (sleeping) battery graph shouldnt display many (if any) purple bars if its all good install next lot of apps
 
Reply
Page 9 of 14 « First 78 9 1011 Last »

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 12:09.

Contact Us - Home - Archive - Top