Active Topics
-
The N900 is now 15 years old! (9)
to Nokia N900 by Arno_11 - 15 hrs ago -
Sailfish OS for the Motorola Moto G7 Power (XT1955-5) - (ocean) (4)
to SailfishOS by Maemish - 6 days, 3 hrs ago - more...
Sash |
2010-11-15
, 17:20
|
|
Posts: 150 |
Thanked: 80 times |
Joined on Dec 2009
|
#931
|
Originally Posted by batman
Try changing the timeout in the code to 10 seconds (-T value). It could be that the 3G connection isn't fast enough to collect the data if it's set to 5 seconds
Code:
| The Following User Says Thank You to Sash For This Useful Post: | ||
 |
|
2010-11-16
, 13:52
|
|
Posts: 2,050 |
Thanked: 1,425 times |
Joined on Dec 2009
@ Bucharest
|
#932
|
Hi.
Didn't read the whole thread, was this already requested before:
I'd like to have the option to pop an option menu on a widget instance. For example, an OC widget, when clicked, would pop up a menu that shows 600, 900 and 1000.
I realize it's not very easy, but if each option has its own command it shouldn't be impossible, methinks. For example, commands could be separated by a reserved sequence. An OC widget could have its command property set to OC600&OC900, and disallow ampersand in command title. Will need to allow command to be custom istead of a list.
Didn't read the whole thread, was this already requested before:
I'd like to have the option to pop an option menu on a widget instance. For example, an OC widget, when clicked, would pop up a menu that shows 600, 900 and 1000.
I realize it's not very easy, but if each option has its own command it shouldn't be impossible, methinks. For example, commands could be separated by a reserved sequence. An OC widget could have its command property set to OC600&OC900, and disallow ampersand in command title. Will need to allow command to be custom istead of a list.
__________________
N900 dead and Nokia no longer replaces them. Thanks for all the fish.
Keep the forums clean: use "Thanks" button instead of the thank you post.
N900 dead and Nokia no longer replaces them. Thanks for all the fish.
Keep the forums clean: use "Thanks" button instead of the thank you post.
|
|
2010-11-16
, 14:03
|
|
Posts: 71 |
Thanked: 4 times |
Joined on Mar 2010
|
#933
|
updating what I said, by adding the gainroot>/dev/null that I added to the end of the 3 states commands created system instability and it didn't create an off state (or toggling between states or both) either.
Surely it must be possible using 2 kernel files? 1 which has been customised (an 'on' state) and one which is stock (an 'off' state)
the command:
if [ "$QBW_EXEC_REASON" == "QBW_STARTUP_UPDATE" ]; then /usr/sbin/kernel-load /home/user/MyDocs/kernel.txt | sudo gainroot
deffinately works at start up (if enabled) or when clicked after start up.
so maybe its not toggling between states because of the sudo gainroot command?
I tried replacing the on/off states commands with:
if [ "$QBW_CURRENT_RESULTS_TEXT" == "ON" ]; then
rootsh /usr/sbin/kernel-load /home/user/MyDocs/originalkernel.txt
echo "OFF";
exit 0;
else
rootsh /usr/sbin/kernel-load /home/user/MyDocs/kernel.txt
echo "ON";
exit 1;
helppp 
Last edited by batman; 2010-11-16 at 14:09.
Surely it must be possible using 2 kernel files? 1 which has been customised (an 'on' state) and one which is stock (an 'off' state)
the command:
if [ "$QBW_EXEC_REASON" == "QBW_STARTUP_UPDATE" ]; then /usr/sbin/kernel-load /home/user/MyDocs/kernel.txt | sudo gainroot
deffinately works at start up (if enabled) or when clicked after start up.
so maybe its not toggling between states because of the sudo gainroot command?
I tried replacing the on/off states commands with:
if [ "$QBW_CURRENT_RESULTS_TEXT" == "ON" ]; then
rootsh /usr/sbin/kernel-load /home/user/MyDocs/originalkernel.txt
echo "OFF";
exit 0;
else
rootsh /usr/sbin/kernel-load /home/user/MyDocs/kernel.txt
echo "ON";
exit 1;
helppp
Last edited by batman; 2010-11-16 at 14:09.
 |
|
2010-11-16
, 15:17
|
|
Posts: 700 |
Thanked: 846 times |
Joined on Nov 2009
|
#934
|
Originally Posted by ndi
technically speaking it can be done by using dbus methods for hiding/showing/resizing widget instances and craft them as menu-shaped widgets. each instance is just a piece of the whole oc widget with main widget driving menu item instances
Hi.
Didn't read the whole thread, was this already requested before:
I'd like to have the option to pop an option menu on a widget instance. For example, an OC widget, when clicked, would pop up a menu that shows 600, 900 and 1000.
I realize it's not very easy, but if each option has its own command it shouldn't be impossible, methinks. For example, commands could be separated by a reserved sequence. An OC widget could have its command property set to OC600&OC900, and disallow ampersand in command title. Will need to allow command to be custom istead of a list.
__________________
Have a look at Queen BeeCon Widget (WIKI) Customizable and flexible widget-based multi-instance monitoring, alerting and interactive tool for the N900
Please provide comments and feedback for having QBW supported and enhanced further - (DONATE) - v1.3.3devel / v1.3.3testing / v1.3.3extras
Have a look at Queen BeeCon Widget (WIKI) Customizable and flexible widget-based multi-instance monitoring, alerting and interactive tool for the N900
Please provide comments and feedback for having QBW supported and enhanced further - (DONATE) - v1.3.3devel / v1.3.3testing / v1.3.3extras
| The Following User Says Thank You to No!No!No!Yes! For This Useful Post: | ||
|
|
2010-11-17
, 00:28
|
|
Posts: 700 |
Thanked: 846 times |
Joined on Nov 2009
|
#935
|
Originally Posted by batman
Please enable V4 logging as per WIKI and post here Beecon Instance Export and V4 log with startup and some states toggle
updating what I said, by adding the gainroot>/dev/null that I added to the end of the 3 states commands created system instability and it didn't create an off state (or toggling between states or both) either.
Surely it must be possible using 2 kernel files? 1 which has been customised (an 'on' state) and one which is stock (an 'off' state)
the command:
if [ "$QBW_EXEC_REASON" == "QBW_STARTUP_UPDATE" ]; then /usr/sbin/kernel-load /home/user/MyDocs/kernel.txt | sudo gainroot
deffinately works at start up (if enabled) or when clicked after start up.
so maybe its not toggling between states because of the sudo gainroot command?
I tried replacing the on/off states commands with:
if [ "$QBW_CURRENT_RESULTS_TEXT" == "ON" ]; then
rootsh /usr/sbin/kernel-load /home/user/MyDocs/originalkernel.txt
echo "OFF";
exit 0;
else
rootsh /usr/sbin/kernel-load /home/user/MyDocs/kernel.txt
echo "ON";
exit 1;
Ciao.
__________________
Have a look at Queen BeeCon Widget (WIKI) Customizable and flexible widget-based multi-instance monitoring, alerting and interactive tool for the N900
Please provide comments and feedback for having QBW supported and enhanced further - (DONATE) - v1.3.3devel / v1.3.3testing / v1.3.3extras
Have a look at Queen BeeCon Widget (WIKI) Customizable and flexible widget-based multi-instance monitoring, alerting and interactive tool for the N900
Please provide comments and feedback for having QBW supported and enhanced further - (DONATE) - v1.3.3devel / v1.3.3testing / v1.3.3extras
| The Following User Says Thank You to No!No!No!Yes! For This Useful Post: | ||
|
|
2010-11-17
, 00:38
|
|
Posts: 700 |
Thanked: 846 times |
Joined on Nov 2009
|
#936
|
Naughty Meego!!!!
__________________
Have a look at Queen BeeCon Widget (WIKI) Customizable and flexible widget-based multi-instance monitoring, alerting and interactive tool for the N900
Please provide comments and feedback for having QBW supported and enhanced further - (DONATE) - v1.3.3devel / v1.3.3testing / v1.3.3extras
Have a look at Queen BeeCon Widget (WIKI) Customizable and flexible widget-based multi-instance monitoring, alerting and interactive tool for the N900
Please provide comments and feedback for having QBW supported and enhanced further - (DONATE) - v1.3.3devel / v1.3.3testing / v1.3.3extras
| The Following User Says Thank You to No!No!No!Yes! For This Useful Post: | ||
|
|
2010-11-17
, 01:02
|
|
Posts: 700 |
Thanked: 846 times |
Joined on Nov 2009
|
#937
|
Meego is naked!!!
No Widgets ... No Desktops ... No Queen Beecon!!!
The Emperor's New Clothes
No Widgets ... No Desktops ... No Queen Beecon!!!
The Emperor's New Clothes
__________________
Have a look at Queen BeeCon Widget (WIKI) Customizable and flexible widget-based multi-instance monitoring, alerting and interactive tool for the N900
Please provide comments and feedback for having QBW supported and enhanced further - (DONATE) - v1.3.3devel / v1.3.3testing / v1.3.3extras
Have a look at Queen BeeCon Widget (WIKI) Customizable and flexible widget-based multi-instance monitoring, alerting and interactive tool for the N900
Please provide comments and feedback for having QBW supported and enhanced further - (DONATE) - v1.3.3devel / v1.3.3testing / v1.3.3extras
|
|
2010-11-17
, 12:28
|
|
Posts: 71 |
Thanked: 4 times |
Joined on Mar 2010
|
#938
|
Please enable V4 logging as per WIKI and post here Beecon Instance Export and V4 log with startup and some states toggle
I will have a look at wiki later and figure out what V4 logging is and how to enable it happily - how?
the other thing was where do I try changing the timeout in the code to 10 seconds (-T value) for the football?
Last edited by batman; 2010-11-17 at 12:58.
I will have a look at wiki later and figure out what V4 logging is and how to enable it happily - how?
the other thing was where do I try changing the timeout in the code to 10 seconds (-T value) for the football?
Last edited by batman; 2010-11-17 at 12:58.
|
|
2010-11-17
, 15:38
|
|
Posts: 150 |
Thanked: 80 times |
Joined on Dec 2009
|
#939
|
Originally Posted by No!No!No!Yes!
Noooooooooooooo!
Meego is naked!!!
No Widgets ... No Desktops ... No Queen Beecon!!!
|
|
2010-11-18
, 19:45
|
|
Posts: 277 |
Thanked: 319 times |
Joined on Jan 2010
|
#940
|
Originally Posted by No!No!No!Yes!
Hello
Here's another way to have a "2 States Button" which is "ON" on widget/system startup and toggles at every press.
First of all, what a great application! I can't believe I haven't noticed this before because it is something I've been looking for.
I use it to control my lights. My server acts, among other things, as a controller for my zwave-network which controls the lights. I can send simple http-request commands to that server to switch on/off/dim any node (light) in that zwave network.
Since I'm a total idiot and can't do anything right, I've just created a single beecon for every command:
The only command that beecon sends is:
Code:
wget ´http://ipaddress:port/ZwaveCommand?command=device&id=21&level=100´
This works well.
Now I'm trying to get the two-state buttons to work as ON/OFF buttons for the nodes AND show the current state.
When I send the http-request the server does its magic with the light and sends this back:
Code:
DEVICE~Eteinen~7~50~Controller DEVICE~Iso taso~9~0~BinaryPowerSwitch DEVICE~Jääkaappi~14~99~MultilevelPowerSwitch DEVICE~Lamppu~15~0~MultilevelSwitch DEVICE~Lastenhuone~19~0~MultilevelPowerSwitch DEVICE~Makuuhuone~20~0~MultilevelPowerSwitch DEVICE~Olohuone~8~99~MultilevelPowerSwitch DEVICE~Pieni Taso~16~255~BinaryPowerSwitch DEVICE~Ruokapöytä~22~99~MultilevelPowerSwitch DEVICE~Spotit~12~0~BinarySwitch DEVICE~Taustavalo~18~0~BinarySwitch DEVICE~Tiskipöytä~11~0~BinaryPowerSwitch DEVICE~Toimisto~21~99~MultilevelPowerSwitch
If I was to save that response to a zwave.txt file every time it is received, could I somehow make all the beecons "read" that text file and change their states (level=0 -> light off, level>0 -> light on) accordingly, while at the same time being able to send ON/OFF-requests? I'm not bothering with DIM-commands because that would require a slider and a way more complex beecon.
As I said, I'm a complete ***** especially when it comes to scripting, so if anyone would like to answer, please keep it simple..
Thanks,
Slarti
