|
2011-04-27
, 07:21
|
Banned |
Posts: 3,412 |
Thanked: 1,043 times |
Joined on Feb 2010
|
#2
|
|
2011-04-27
, 07:45
|
Banned |
Posts: 3,412 |
Thanked: 1,043 times |
Joined on Feb 2010
|
#3
|
|
2011-04-27
, 10:59
|
Posts: 3 |
Thanked: 0 times |
Joined on Apr 2011
|
#4
|
Hi all
First apologies if this has been covered elsewhere - I have tried searching but couldn't find the specific problem
My N900 has entered into a repeated boot sequence which I can only stop by removing battery. I suspect this may be due to me uninstalling 2 or 3 applications using "faster application manager" as I've had no problems before this (I'm not knocking faster application manager - I think it was something I did!)
I've downloaded the flasher a Vanilla EMMC image and the world FIASCO image and loaded them onto a laptop running 32bit vista home edition. The battery has fully charged externally. I run the flasher and try to flash the EMMC following the instructions provided and initially it shows as being connected and working. After a second or two the flasher shows no suitable usb device found. Then the screen on the N900 shows the Nokia logo on a bright screen and the charging light shows continuous yellow.
The laptop shows that it has detected and installed a nokia usb cable but then says there's an unidentified usb device and searching pre installed folders but never finds anything. I assume there's a problem with USB drivers but I'm probably wrong.
Any advice appreciated -
Gavin
|
2011-04-27
, 15:20
|
Posts: 22 |
Thanked: 14 times |
Joined on Feb 2010
|
#5
|
The Following User Says Thank You to scoobied For This Useful Post: | ||
First apologies if this has been covered elsewhere - I have tried searching but couldn't find the specific problem
My N900 has entered into a repeated boot sequence which I can only stop by removing battery. I suspect this may be due to me uninstalling 2 or 3 applications using "faster application manager" as I've had no problems before this (I'm not knocking faster application manager - I think it was something I did!)
I've downloaded the flasher a Vanilla EMMC image and the world FIASCO image and loaded them onto a laptop running 32bit vista home edition. The battery has fully charged externally. I run the flasher and try to flash the EMMC following the instructions provided and initially it shows as being connected and working. After a second or two the flasher shows no suitable usb device found. Then the screen on the N900 shows the Nokia logo on a bright screen and the charging light shows continuous yellow.
The laptop shows that it has detected and installed a nokia usb cable but then says there's an unidentified usb device and searching pre installed folders but never finds anything. I assume there's a problem with USB drivers but I'm probably wrong.
Any advice appreciated -
Gavin