Reply
Thread Tools
jet247 is offline jet247
2014-01-20 , 23:23
Posts: 7 | Thanked: 0 times | Joined on May 2011 @ UK
#1
Hi All,

I'm having quite a bit of trouble removing the modified MOSLO on my N950 to then reflash the standard nokia image. I'm using a mac to try and do so....

I know I need to telnet into the device to remove the MOSLO using the steps on this page... https://wiki.merproject.org/wiki/Nem...ling#N9.2FN950

However no matter what I try I just can't seem to get the telnet to connect to my N950. Is there anything obvious I would be doing wrong? It gives me the IP address to telnet to but I always get the same error:

Trying 192.168.2.15...
telnet: connect to address 192.168.2.15: Operation timed out
telnet: Unable to connect to remote host

Any ideas? It'd be much appreciated if someone could help out.
Last edited by jet247; 2014-01-23 at 22:17.
 
juiceme is offline juiceme
2014-01-21 , 04:20
Community Council | Posts: 4,920 | Thanked: 12,867 times | Joined on May 2012 @ Southerrn Finland
#2
Is your usb network interface in UP and RUNNING state?
 
rainisto is offline rainisto
2014-01-21 , 06:36
Posts: 1,067 | Thanked: 2,383 times | Joined on Jan 2012 @ Finland
#3
Have you installed RNDIS drivers to your mac? http://joshuawise.com/horndis

Your interface appears and can be configured with normal GUI after installing the driver.
__________________
IRC: jonni@freenode
Sailfish: ¤ Qt5 SailfishTouchExample ¤ Qt5 MultiPointTouchArea Example ¤ ipaddress ¤ stoken ¤ Sailbox (Dropbox client) ¤
Harmattan: ¤ Presence VNC for Harmattan ¤ Live-F1 ¤ BTinput-terminal ¤ BabyLock ¤ BabyLock Trial ¤ QML TextTV ¤
Disclaimer: all my posts in this forum are personal trolling and I never post in any official capacity on behalf of any company.
Last edited by rainisto; 2014-01-21 at 22:20.
 

The Following User Says Thank You to rainisto For This Useful Post:
jet247 is offline jet247
2014-01-21 , 13:31
Posts: 7 | Thanked: 0 times | Joined on May 2011 @ UK
#4
Juiceme: I originally thought the USB network interface was up and running but now I'm not so sure. Is there anyway to check?

Rainisto: No I haven't actually, I'm at work at the moment so I can't check what that does, but ill do it when I get home.
 
juiceme is offline juiceme
2014-01-21 , 16:37
Community Council | Posts: 4,920 | Thanked: 12,867 times | Joined on May 2012 @ Southerrn Finland
#5
You need to install the drivers in order to use it, just like @rainisto said.

After you have the driver in your system, I guess you can see the interface when you go to console and give command "ifconfig usb0" (or at least I asume so, as MAC's are a kind of BSD, right?)
 
jet247 is offline jet247
2014-01-21 , 22:53
Posts: 7 | Thanked: 0 times | Joined on May 2011 @ UK
#6
I've installed the drivers but I'm still having issues, I'm not too sure on how to set up the usb network interface? When I believe I've got to a point when its working, it just always times out when trying to telnet.

With the normal GUI rainisto, is there anything special i'm meant to be doing to set it up? Multifunction Composite Gadget 3 seems to be appear when the N950 is plugged in, but it asks for an IP address a subnet mask and a router address. There's also a variety of ways to configure it by the looks of it?

The ifconfig usb0 type command also never seems to work? Always says usb0 does not exist or whatever port i use.
 
juiceme is offline juiceme
2014-01-22 , 06:34
Community Council | Posts: 4,920 | Thanked: 12,867 times | Joined on May 2012 @ Southerrn Finland
#7
Does command "ifconfig -a" show anything related to USB networking when the device is plugged in and waiting for connection?
How about logs/dmesg? (I assume MAC has something like that, too...)
 
jet247 is offline jet247
2014-01-23 , 22:13
Posts: 7 | Thanked: 0 times | Joined on May 2011 @ UK
#8
Right I finally managed to get the telnet working..... However when I went to try and remove the MOSLO it gave me an error.....

/ # autopartition.sh delete /dev/mmcblk0
ERROR: (Alt_OS) partition does not exist!
/ #
So I've somehow deleted the partition but MOSLO still exists. When I tried to then get rid of it, I got this error....

$ flasher -a moslo-rootfs-1.2011.34-2_RM680-OEM1-916_0.0.13-12.1.bin -L empty.img -f -R
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

WARNING: bad moslo format in empty.img
ERROR: Bad ape-algo format in moslo-rootfs-1.2011.34-2_RM680-OEM1-916_0.0.13-12.1.bin
So then I thought how about just using a simple flasher command to try and reflash the latest version of Harmattan.... But it won't do that either and it won't boot past the nokia logo. Does anyone know how I could possibly fix this? I'd be extremely grateful for any help


NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_RM680
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 29943 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 36, device address 3.
Device serial number is
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-680 rev. 1124
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_RM680
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 94 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 90 / 90 kB NA ]
[_] kernel [finished 100 % 2714 / 2714 kB 1840 kB/s]
[_] rootfs [finishing 100 % 8192 / 762871 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6008 / 6008 kB 3360 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 90 / 90 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1840 kB/s]
[f] rootfs [finishing 0 % 12288 / 762871 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: Partition table mismatch (start=26853376, sum=18661376). You may want to use the no-preserve option or flash an erase image.
mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmcqU9AVx/internal0p2'
mmc: Could not remove mount directory /tmp/sudmmcqU9AVx/mnt: No such file or directory
[Pipe 4] Finishing in error state with status 1
========================================

ERROR: Failed to flash images
 
yaliang is offline yaliang
2014-01-23 , 23:54
Posts: 113 | Thanked: 67 times | Joined on Jun 2012 @ Yunfu city,Guangdong province,China
#9
driver is not found
__________________
I am sorry for my poor English....
Using N900 in China.
BBS moderator in bbs.dospy.com 's n900 plate.
http://bbs.dospy.com/forum-315-1.html
 
thedead1440 is offline thedead1440
2014-01-24 , 01:53
Moderator | Posts: 6,215 | Thanked: 6,400 times | Joined on Nov 2011
#10
Jet247 do the following:

flasher -f -F rootfs.bin -F emmc.bin --no-preserve -R
 
Reply

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 16:37.

Contact Us - Home - Archive - Top